bore capacity in steel (diameter) 18,0 mm
throat 190 mm
bore stroke 80 mm
morse taper 2 Kurzspindel MK
turning speeds 225 - 4.300 U/min
voltage 400 / 50 Hz Volt
table: 300 x 240 mm
column diameter 65 mm
engine output 0,37 / 0,55 kW
weight 110 kg
Furnishing:
- Large spindle speed range
- stepless speed adjustment
- machined base plate
- Electrically secured spindle protection
- Main switch lockable with motor protection switch
- Reversing switch for clockwise and counterclockwise rotation
Nlo...
Please note!!! New machine! Will be ordered only after receipt of order!!!
Alzstar 18-T/S
Drilling tool steel E335 (St 60): 18 mm
8ltvhjkg
Tapping steel (St 60): M12
Cast iron (EN-GJL-200): M14
Short spindle: MK 2
spindle stroke: 80 mm
throat depth: 190 mm
column diameter: 65 mm
machine table, usable support: 300 x 240 mm
T-slots, number x width x distance: 2 x 12 x 80 mm
distance spindle-table min./max. 75/357 mm
feed: manual
Machine height without options approx.: 840 mm
net weight approx...
ALZMETALL Alzstar 18-T/S,
Manufacturer. Alzmetall
Type: Alzstar 18-T/S
Condition: New
Drilling capacity in St 60: 18 mm,
Thread cutting in St 60: M 12,
thread cutting in GG 20: M 14,
short spindle: MK 2,
spindle speed: 225-4,300 rpm,
spindle stroke: 80 mm,
throat depth: 190 mm,
column diameter: 65 mm,
Machine table - usable support: 300x240 mm,
G7nvcga7q
T-slots number - width - distance: 2 x12 x80 mm,
distance spindle-machine table min/max: 75/357 mm,
Machine base plate usable support: 300x240 ...
Manufacturer: AP&T Lagan
Type: FMC-2500 MC12 1010 S
Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm
(sender table: 1000 x 800 mm)
Clearance: 1000 x 700 mm
Stroke: 500 mm
B2gmnt8yam
Press force: 2500 kN - 250 t
Voltage: 400 V
Electric power: 45 kW
Hydraulic oil capacity: ~1.000 l
Weight: ~11.000 Kg
Manufacturing year: 1991
Operating hours: 13.296 h
Condition: Not tested, disassembled from a working factory
Used system completely overhauled (new reading heads and measuring tapes, new control, motorized Y-table with 35kg load capacity. BJ 07/2007
Contour measuring system with overhead measuring function + roughness test module
Scope of delivery:
Mechanics complete with Y-adjustment table and integrated control,
Probe arm 6829-02/2 150/20.5 (25µm)
Probe arm 6829-08/2 150/2x5 (25µm)
R-probe arm 6829-65 R190/6 (2µm/60°)
Probe tip calibration standard, force scale, joystick industrial version, evaluat...
Modular extensible Contour measuring system
Anytime optionally via software updatable functions:
- up-down-directions Z-Scanning
- option Roughness measurement
- motorized Y-Supporting table
Scope of supply:
- Basic mechanics with integrated Y-adjustment table
- Integrated control system
- PC W10/64Bit; 24"TFT flat screen;
- CunturoMatic Software; user manual
- Software option for measurement and evaluation of the following standards:
DIN EN ISO 4287 (10/1998)
DIN EN ISO 4288 (04/1998...
Working width 3500 mm
Working height 2300 mm
Number of cylinders 4 St.
Stable frame welded construction of thick-walled
Special hollow profiles , sliding table and pressure beam with
50 mm hole pattern .
On the left side continuous abutment for grouting the wide ,
lower abutment in 2 levels.
Vertical pressing cylinder on specialty bar with one-
quick adjustment with weight compensation in the 50 mm hole pattern
adjustable in height. Long sliding table ensure the
continuous recording of high...
Technical data baler:
Manufacturer Paal (Kadant Paal GmbH)
Typ Konti 425 G/S/K
Year of construction 2012
Operating hours of the pumps, pump 1: 9,130 hours, pump 2: 8,729 hours, as of June 2022
Number of pressed bales 134,623 pieces
Press power 120 tons (1,197 kN)
Specific press capacity 145 kN/cm²
Feed channel 2,000 x 1,020 mm (l x w)
Throughput rate under operating conditions 265 m³/hour
Theoretic throughput rate 545 m³/hour
Bale size 1,100 x 750 mm (w x h), length varialbe
Drive power motor 1:...
bore capacity in steel (diameter) 30,0 mm
throat 293 mm
bore stroke 140 mm
morse taper 3 MK
table: 514 x 360 mm
turning speeds 225 - 4.300 U/min
engine output 1,0 / 1,6 kW
column diameter 115 mm
weight 260 kg
Machine height 1.790 mm
Furnishing:
- stepless speed adjustment
- Reversing switch for R / L run
- digital speed display
- Connector and cable mounted
- Spindle protection with electr. validation
- 2 mtr. Connection cable with plug 16A
Beobzzhwql
Specifications / Technical Data S-400/T
CNC-Portal-Router / CNC-Engraving machine
With the purchase of the T-variation of High-Z cnc-router you get a proven technology. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high travers...
Column drilling machine
used
Make: Alzmetall
F2fana09
model Alzstar 40 S
year of construction: 2007
drilling capacity in steel (ST60) 40 mm
thread cutting ST 60 M 24
spindle mounting MK 3
spindle stroke 120 mm
throat 293 mm
column diameter 115 mm
motor 160-2250 rpm
Power1,45 / 1,9 kW
weight 270 kg
Please note!!! New machine! Will be ordered only after receipt of order!!!
Drilling capacity steel E335 (St 60): 30 mm
Thread cutting
Steel E335 (St 60): M 16
Cast iron EN-GJL-200 (GG20): M 20
Short spindle: MK 3
spindle stroke: 140 mm
throat depth: 293 mm
column diameter: 115 mm
machine table, usable support: 514 x 360 mm
T-slots, number x width x distance: 2 x 14 x 224 mm
distance spindle-table min./max. 132/724 mm
feed: manual
Machine height without options approx. : 1770 mm ...
Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ?
A CE compliant commissioning of our CNC machines requires the assembly of the safety enclosure and the suction adapter.
Brass, copper , steel, stainless steel and many other materials can be processed .
Vgv9a7cnn
See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your r...
Drilling capacity in St 60 30 mm
Short spindle MK 3
drilling stroke 140 mm
throat 293 mm
column diameter 115 mm
Machine table - usable support 514x360 mm
distance spindle-machine table min./max. 132/724 mm
Manual feed
Hirbulaga
spindle speed 225-4300 rpm
total power requirement 1,0/1,6 kW
machine weight approx. 260 kg
Special equipment:
- Coolant device B
Standard equipment:
- Mushroom pushbutton (latching) for EMERGENCY STOP
- Reversing switch for right/left rotation
- motor protection switch...
CTS Temperature Test Chamber
Here we offer you a CTS temperature test chamber.
Water cooled
Type series: CTS T-30/920/S
Test chamber volume: 920 liters
Test chamber dimensions:
D x W x H 820 x 850 x 1340 mm
Outer dimensions:
C0sfznmm
D x W x H 1870 x 1200 x 2400 mm
Temperature working range:
Temperature range -30(Tested to -35) to +180°C
Heating speed: 2,5 K/min
Cooling speed: 2,8 K/min
Electrical connection 400 V 3/N, 50 Hz
Rated power: approx. 7,3kW
Rated current: approx. 12.5 A
Refrigerant: R...
Blow molding machine KAUTEX KB 15/10 S 60/18, retrofittet in 2014 with new extruder and new Control by BBM Maschinenbau.
2 machines available. Inspection under power possible.
Q80hh
Column drilling machine Alzmetall Alzstar 40/S
Manufacturer: Alzmetall
Type: Alzstar 40/S
Condition: new
drilling capacity steel E335 (St 60) 40 mm
short spindle MK 3
spindle stroke 120 mm
throat 293 mm
column diameter 115 mm
Machine table, usable support 514 x 360 mm
T-slots, number x width x distance 2 x 14 x 224 mm
Ps9hhe
distance spindle-table min./max. 117/701 mm
Feed manual
Machine height without options approx. 1840 mm
Net weight approx. 270 kg
Spindle speed rpm 160-2250
Specifications / Technical Data S-1000/T
CNC-Router / CNC-Engraver
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / se...
2-fold line drilling machine make ALZMETALL type AX 2/S
make # 420/1 and 420/2, year of construction 1991
technical data:
drilling capacity steel 18 mm
drilling capacity cast iron 23 mm
spindle speed stepless 450 - 4300 rpm.
Feed by hand
spindle mounting MK 2
spindle stroke 90 mm
throat 250 mm
column diameter 90 mm
clamping surface of the table 635 x 335 mm
motor power per head 0,55 kW
outer dimensions L x W x H approx. 1700 x 870 x 1550 mm
total weight approx. 500 kg
with
- foot switch per tabl...
Cooler Guntner
Type: S-GHN 065D/18
Cooling capacity: 20 kW at DT8
Fin spinning: 8 mm
Place for electric heaters
Fans: 1 x 650 mm
Rpm: 860/640
Dimensions: 2130 x 950 x 1000 mm
Refrigerant: Glycol
Volume: 41 L
Qhenh
Weight: 160kg
Pieces in stock: 2
Reference number: CH258
Condition: Used
We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat proce...
Specifications / Technical Data S-720/T
CNC-Engraving-Machine / Milling machine / CNC-Router
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there...
Specifications / Technical Data S-400/T
CNC-Portal-Router / CNC-Engraving machine
Grabite marble soapstione slate engraving photo engraving, milling .....
With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantast...
Specifications / Technical Data S-720/T
CNC-Engraving-Machine / Milling machine / CNC-Router
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time ther...
Specifications / Technical Data S-1400/T
CNC-Router and CNC-Engraver / Engraving Machine
(Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series )
With the purchase of the T-variation of High-Z CNC-router you get a proven technology. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed.
Because of the used ball screws the High-Z/T cnc-machines achieves a f...
Gear motor, electric motor, electric gear motor
-Speed: 18 rpm
-Power: 0.25 kW
-Diameter shaft: Ø 25 mm
-Design: B5
-Protection class: IP 55
-Weight: 14 kg
Qlrc0t0kb
Fagor CPU-KCF 8055 PLUS-T /V: H: 48A / S: 12.21 , serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos
7avt9fdd
Cab
ref: 325060 Double additional hydraulics, clamp Durwen PGK 15, width 980, load protection grid: 1000 mm above floor, steel frame + front, roof - and rear window, heating, 2 x LED working lights front, 1 x LED reversing lights + Blue Spot rear, interior mirror, driver's seat air-suspended (fabric cover), lift mast positioning preselection, fork wear stop, restraint system mechanical with electronic drive release, double pedal, central lever and single lever operation, overhead guard in DRIVE ...
Temperature range Badtemperatur ca. 55 °C
heating time (20° auf 60°) ca. 120 min
Heating Elektroheizung
container volume Reinigen 800 l
container volume Spülen 600 l
container volume Ölnebenabteil 220 l
total power requirement 80 kW
weight of the machine ca. 4,6 = Leergewicht t
weight of the machine ca. 7,0 = beüllt t
Overall size L 5,2 x B 2,4 x H 2,53 m
dimensions of the machine ca. L 6,5 x B 3,5 x H 3,5 m
Two identical machines are available.
The machines are in very good condition.
Th...
GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 272612 ,unused in original packaging, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Co7kryi
GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 272607 ,unused in original packaging, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Rfkmf
GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 281110 ,unused in original packaging, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Ciymjticul
Siemens 6SN1111-0AA01-0BA1 SIMODRIVE filter module 16KW version D S: T/J2599100 , used, normal signs of wear, 100% functional, scope of delivery according to photos
Cizu0ac2uj
Siemens 6SN1145-1BA01-0BA2 SIMODRIVE E/R module 16/21KW S: T-A32074615 Version : D , used, small traces of use, 100% functional, scope of delivery according to photos
Bmptd0fi
GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 281117 ,unused in original packaging, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Ciymkp2tqo
GMN TSSV 170 s - 12000 / 18 A high-speed spindle SNr. 287832 ,unused in original packaging, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately!
Crtfemr
Olympic Games: Machineseeker sponsors Team Germany
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 250,000 inquiries per month
10 valuable tricks for buying used machines online
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.