Used Altrad Sa for sale (4,134)

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Iodpey In Avefx Ap Dotn Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Ijdpoy In Apofx Ap Dotn No of Grippers: 9 Thin sheet loading: yes

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication Itodjxx Tigopfx Ap Den NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,550 mm, saw blade speed: 2,800 rpm, overall weight: 280 kg, For sale is an elumatec SA 73/35 sawing machine, manufactured in June 2006. The machine is suitable for the automatic cutting of aluminum. Itsdpoz D Ahmsfx Ap Den

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. Iedpfjztma Uox Ap Detn History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Itjdpjzkqm Hefx Ap Djn

Condition: good (used), Year of construction: 1995, Max. cutting length: 5200 mm Max. cutting width: 600 mm Max. cutting height: 170 mm Itedez H H Dwopfx Ap Djn Saw motor: 11 kW Drive: hydraulic, via chain Width stop with digital display With laser

Condition: good (used), Year of construction: 1997, functionality: fully functional, 1 x CNC long-turn lathe Star SA 12/16 Year of manufacture: 1997 Control system: Fanuc 18 i-T with loading magazine Iemca Isdpoz Hccijfx Ap Djtn CH 220/32 Year of manufacture: 1998 Technical data: Spindle bore: 16 mm Spindle travel: 140 mm Main spindle speed: 500 - 12,000 rpm Counter spindle speed: 500 - 8,000 rpm Speed: driven tools: 0 - 4,000 rpm (remaining data see photos) Approximately 6 months ago, the counter spindle was fitted with new bearings. The machine can be inspected while in operation and under power.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, inner dimension length: 9,300 mm, inner dimension width: 220 mm, inner dimension height: 220 mm, overall weight: 11,000 kg, control type: NC control, fuel type: electric, Equipment: CE marking, documentation/manual, in zeer goede staat hoogfrequent vacuüm droger capaciteit 12,5 tot 13 m3 vermogen HF output 50 kw bij een input van 70 Eva door te drogen onder vacuüm verlaagt het kookpunt van water vanaf 60 graden wat sneller drogen op lagere temperaturen mogelijk maakt Itedpfxsy Dr N Se Ap Djn

Condition: used, Year of construction: 2002, Technical details: grinding length: 1500 mm grinding width: 700 mm workpiece height: 580 mm table load capacity: 2380 kp table speed -stepless-: 5 - 35 m/min grinding wheel dia. x width: 500 x 100 x 203 mm Ijdsz Dvidepfx Ap Djtn grinding wheel motor: 18 kW speeds:: infinitely variable (elektronically) total power requirement: 35 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin *

Condition: used, Year of construction: 1993, functionality: unexamined, machine/vehicle number: 104931294, grinding length: 1,500 mm, grinding width: 600 mm, type of input current: three-phase, input voltage: 400 V, Flat and profile grinding machine Geibel & Hotz FS 1560 SA, manufactured in 1993. Machine no. 104931294, connection 3 x 400 V, 50 Hz, rated current 45 A, fuse rating 63 A, control voltage 230/24 V. Grinding length 1,500 mm, grinding width 600 mm. Magnetic clamping table, coolant supply to the grinding wheel, splash guard, control panel with preset counters for the Y and Z axes. Iedpez A Ukwofx Ap Dotn Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by agreement. All information without guarantee.

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Itjdpourkypofx Ap Don Rated current: 2 A

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff Itjdegb Ec Hjpfx Ap Dsn CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: good (used), Year of construction: 1989, GABBIANI SA/350 Multirip Saw Track width: 300 mm Shaft width: 300 mm Max cutting height: 120 mm Max blade diameter: 350 mm Blade bore diameter: 70 mm From above: 2 rows of pawls + Smooth pressure shaft, sliding + Pressure roller + Shaft with saw blades + Iodpfexn Szmox Ap Dstn 2 smooth, sliding pressure shafts + From below: Guide + Pawls + Track (chain feed) + 2 feed speeds + Main motor approx. 35 kW Feed motor 1.3 kW Central lubrication + Table size (L/W): 2000x710 mm Dimensions (L/W/H): 2400x1350x1350 mm Weight: 1360 kg

Year of construction: 2016, condition: ready for operation (used), travel distance X-axis: 500 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 3,500 rpm, table load: 200 kg, number of axes: 2, Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details. * Grinding length: 500 mm* Grinding width: 200 mm* Maximum grinding height (table to spindle center): 350–397 mm* Magnetic chuck: 500 x 200 mm* Table load capacity: 200 kg* Hydraulic table feed: up to 27 m/min* Grinding spindle motor power: 1.5 kW* Standard grinding wheel: 225 x 19 x 50.8 mm Iedpozwpt Eofx Ap Dotn Optional Accessories available

Year of construction: 1987, condition: used, One Rösler R 300 A/SA-KP and one R 300 RT are available, year of manufacture: 1986/ 1987, 1) R 300 A/SA-KP, connected load: 4.5kW, weight: 830kg, 2) R 300 RT, connected load: 19kW, weight: 2,130kg, with documentation. An on-site inspection is possible. Itsdpfx Apezuzy Eo Dsn

Condition: good (used), Year of construction: 1990, functionality: fully functional, G & H FS 40 SA, Year of manufacture: 1990, Grinding length: 400 mm, Grinding width: 200 mm, Working height: 320 mm, Isdpfx Apezpwywe Detn Electric facing device, Cross clamping, Cross stop.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Surface grinding machine Geibel&Hotz Type FS 40 Primus SA Condition: good Itsdpfx Aoyh Hutop Don Fully functional

Condition: used, Year of construction: 2023, gebraucht 2023 6242 prompt, Zwischenverkauf v Italien 5400 € 1 Schwenkrahmen 2450x27x0,9 mm 35/70 m/min 220 mm 220 mm 260x140 mm rund 160 mm, quadrat 155 rund 95 mm, quadrat 95 mm 965 mm 1200 mm 1100 mm 1860 mm 240 kg demo machine / mint condition net price (price for new machine € 6.730,00) manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment OPTIONS: Roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: Iodewiqpzopfx Ap Dstn

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: Ijdpfx Apoy Efl Nj Djtn - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Itodpfjxvbvvex Ap Don Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: used, mileage: 698,000 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN TGX 18.500 – RETARDER – STAND-UP AIR CONDITIONING – ADJUSTABLE FIFTH WHEEL – ACTIVE BRAKE SYSTEM – VOLUME – VEHICLE HISTORY * GERMAN VEHICLE * FROM 2ND OWNER * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * RETARDER * CRUISE CONTROL * DISTANCE CONTROL (ACC) * LANE KEEPING ASSISTANT * ACTIVE BRAKE SYSTEM * AIR CONDITIONING * CABIN HEATER * STAND-UP AIR CONDITIONING * ON-BOARD COMPUTER / NAVIGATION * REFRIGERATOR * 2X SLEEPER CAB * COMFORT SEATS / HEATED SEATS * XENON HEADLIGHTS * FULL AIR SUSPENSION * ADJUSTABLE FIFTH WHEEL * 2 X TANKS * ADBLUE * TIRE SIZE: * FRONT: 355 / 50 R 22.5 * REAR: 315 / 45 R 22.5 * GOOD TIRE CONDITION * ADJUSTABLE FIFTH WHEEL * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Subject to changes, errors, and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Iedpfxsz Shx No Ap Detn Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for initiating a contract. The information provided here is without guarantee and does not therefore constitute guaranteed characteristics.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated Itsdpfxezytmzs Ap Djn - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Ice flaker MAJA Ijdsv S H Tpspfx Ap Detn Year of manufacture 2009, Voltage 400 V, 3 Ph, 50 Hz, 5.42 A, Power 1.9 kW, Cooling agent: R404A Dimensions: MAJA: 800x600x860 Box: 1350x1900x1670

Condition: used, maximum load weight: 13,570 kg, overall weight: 21,500 kg, axle configuration: 1 axle, first registration: 04/2019, loading space length: 11,320 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, loading space volume: 78 m³, Equipment: ABS, Lanz + Marti SA 20 Refrigerated Box Body, LBW, Steerable Axle . For inquiries: 1026875 * First registration: 04/2019 * Condition: very good * Permissible total weight: 21,500 kg * Weight: 7,930 kg * ABS * EBS * 1-axle air suspension / Steered * Drum brakes Itodpfxsz Shg Tj Ap Dsn * Underrun protection, aluminum Refrigeration unit: Carrier - Vector 1950 Mt° * Diesel hours: 3,690 h * Electric hours: 18 h Tail lift: Zepro * Load capacity up to max. 2,000 kg Dimensions (loading space / loading area) Loading space length: 11,320 mm * Loading space width: 2,470 mm * Loading space height: 2,790 mm Tires: 1st axle: 245 / 70 R 19.5, 40%, air suspension ----Price: EUR 21,900 + 19% VAT For further questions, you can reach us on the following telephone numbers: * We speak: German, English, French, Polish, and...? Typographical errors, errors and prior sale excepted.