1
plate thickness 5,0 mm
tube diameter 27,9 - 61,0 mm
motor 400 Volt
total power requirement 2,2 kW
weight of the machine ca. 87 kg.
The advantages at a glance: high productivity, low investment, simple
and fast operation, several diameters immediately available and ideal
for double corner connections.
With the motor-driven pipe notcher AL1-2E you can cut pipes with the
Outside diameter Ø 26.9 (3/4?) Ø 33.7 (1?) Ø 42.4 (1_¼ ") Ø 48.3 (1_1 / 2?)
and 60.3 (2?) Notch.
Furnishing:
- for pipes 27....
wall thickness max. 5 mm
wall strength VA 4 mm
26,9/33,7/42,4 /48,3/60,3 mm
3/4", 1",1 1/4", 11/2" ,2 Zoll
Benmgvq923
total power requirement 2,2 kW
voltage 230 oder 400 V
weight of the machine ca. 87 kg
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
770
1 1/2", 2" mm
3 mm
15 kg
The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2").
ALMI products are subjected to stringent quality control inspections before they leave the factory.
ALMIs pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.
Dyjbnjl
Moreover, the price is more affordable than the auxiliary tools for ...
4
Almi Pipe notcher AL 1-2 U
elektric version 3/4"- 2"
and zinc drain
400 V 50 hz 3 ph.
O9wed
Engine: 4 kW
Voltages: 230V 3F, 400V 3F or 460V 3F
belt speed: 45 m/s, 4300 r/p
belt dimensions: 100×2000 mm / 150×2000 mm
Nvbzv
grinding diameter: Ø20-Ø114.3
Grinding angle: 20 - 90
Operation: Lever and manual wheel operation
2-in-1 pipe grinder
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a ...
10
plate thickness 5,0 mm
tube diameter 27,9 - 61,0 mm
motor 400 Volt
total power requirement 2,2 kW
weight of the machine ca. 93 kg.
The advantages at a glance: high productivity, low investment, simple
and fast operation, several diameters immediately available and ideal for
double corner joints.
W3tyc
With the AL1-2U pipe notcher, you can cut pipes with outside diameters of Ø
26.9(3/4?) Ø 33.7(1?) Ø 42.4(1_¼) Ø 48.3(1_1/2?) Ø 60.3(2?) and tubes for
Notch zinc spouts with outside diameters f...
wall thickness max. 4 mm
27 - 61 mm
wall thickness VA 3 mm mm
Nll97
weight of the machine ca. 7 kg
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
630
3/4", 1", 1 1/4" mm
3 mm
8 kg
The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4").
Bwwwyf8srf
The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past.
The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing t...
Engine: 4 kW
belt speed: 30 m/s, 2800 rpm
belt dimensions: 100×2000 mm / 150×2000 mm
Bhkitfwxjs
grinding diameter: Ø20-Ø114.3
Grinding angle: 20 - 90
Operation: Lever and manual wheel operation
Weight: 260 kg
Easy to operate
The AL150 can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3 The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profi...
4
tube diameter 20 - 114,3 mm
engine output 4 kW
grinding band dimension 150 x 2000 mm
Band Speed 30 prm
voltage 230 oder 400 V
Benm77mwwk
weight 270 kg
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
840
1 1/4", 1 1/2" mm
3 mm
15 kg
The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4) and Ø48.3 mm (1 1/2).
ALMI products are subjected to stringent quality control inspections before they leave the factory.
Bwwwzcsdni
ALMIs pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.
Moreover, the price is more affordable than the auxiliary tools fo...
Pipe notcher for pipes with outside diameter
Ø42.8 (1 1/4″), Ø48.3 (1 1/2″) and Ø60.3 (2") mm
easy to mount on the wall
ideal for double corner joints
Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg
Easy to operate
C8dswttzg
With the AL3 pipe notcher you can notch pipe outside diameters of Ø42.4 (1 ¼") and Ø48.3 (1 ½"). Unlike punching machines with separate auxiliary tools, ALMI's pipe notcher is always directly available. And the price is even lower than the correspondi...
tube diameter 20 . 76,1 mm
Band Speed 30 m/sec
engine output 3 kW
grinding band dimension 100 x 2000 mm
voltage 230 oder 400 V
2905 U/min
dimensions 1450 x 1150 x 650 mm
weight 210 kg
Benm8g73kl
Pipe notcher for pipes with outside diameter
Bhking9gy8
Ø48.3 (1 1/2″) and Ø60.3 (2") mm
easy to mount on the wall
ideal for double corner joints
Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg
Easy to operate
With the pipe notcher AL2 you can notch pipe outside diameters of Ø48.3 (1 ½") and Ø60.3 (2″). Unlike punching machines with separate auxiliary tools, ALMI's pipe notcher is always directly available. And the price is even lower than the corresponding auxiliary tool...
2
tube diameter 20 - 76,1 mm
engine output 3 kW
Band Speed 30 rpm
grinding band dimension 100 x 2000 mm
Benm8qpb8m
voltage 230 oder 400 V
dimensions 1450 x 1150 x 650 mm
weight 190 kg
Pipe notcher for pipes with outside diameter
Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm
easy to mount on the wall
Gzqoyj32
ideal for double corner joints
Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg
Easy to operate
With the pipe notcher AL1 you can notch pipe outside diameters of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼"). The hand-held devices can be easily mounted on the wall. With ALMI pipe grinders, filing or milling pipes is a thing of the past. Due to their favou...
Pipe notcher for zinc discharge into pipes with external through-hole
knives from Ø22 to Ø76 mm
for cutting out vent slots from round and
rectangular metal tubes from 22 mm outer diameter
easy to mount on the wall
Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg
Easy to operate
With the ALU pipe notcher you can notch a zinc outlet in outer diameters from Ø22 to Ø76 mm. ALMI pipe notchers are available for cutting the ventilation slots of round and rectangular metal pipe...
6
Grinding diameters: Ø20 - Ø76,1 mm
Grinding angle: 30º – 90º
Belt speed: 30 m/s, 2800 rpm.
Tire size: 100 × 2000 mm
Operation: Leveroperation
Including roll: Ø48,3 mm
Motor: 3 kW
Qjwcb
Country of origin: The Netherlands
Machine weight: 210 kg
This machine is unused!
5
gebraucht
2019
5505
Eljnirpm
Niederlande
2670
1
100 x 2.000 mm
20 - 76,1 mm
1
3 kW
190 kg
The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of ...
15
Pipe grinders/notchers
ALMI pipe grinders are built solidly, because these machines run at high speeds. That is why stability has a major impact on the end result.
2 IN 1 PIPE GRINDER
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the rear cover, you can also use the pipe grinder as a belt sander, ideal for deburring cut profiles. The AL150HS has the option of being operated by means of two handwheels or by means of a lever. Both options are available on...
1
Manual pipe Notchers Fabr. ALMI type A-2
Beb2gddzzv
Technical data:
for notching tools 1 "= 34.8 mm
with
-Hand lever
used
6
Used Almig refrigeration dryer ALM 740
Year of construction 2011
Technical specifications:
Model: ALM 740
Medium: compressed air, free from aggressive components
Flow rate: 680 m³ / h * (11.33 m³ / min)
Operating pressure: 7 barü
Bdp3vbl9j2
Operating pressure max. : 16 bar
Compressed air temperature inlet: 35 ° C
Compressed air temperature inlet max. : 49 ° C
Ambient temperature: 25 ° C
Ambient temperature max. : 43 ° C
Ambient temperature min. : 4 ° C
Pressure dew point: +3 ° C
Compressed air c...
42,4, 48,3 mm
1 1/4", 1 1/2" Zoll
Gvucd8
wall thickness max. 4 mm
wall strength VA 3 mm
weight of the machine ca. 15 kg
6
Grinding diameters: Ø20 - Ø76,1 mm
Grinding angle: 30º – 90º
Belt speed: 30 m/s, 2800 rpm.
Tire size: 100 × 2000 mm
Operation: Lever and handwheel operation
Including roll: Ø48,3 mm
Motor: 3 kW
Country of origin: The Netherlands
Machine weight: 210 kg
2sdpmuj2
This machine is unused!
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
690
22-76 mm
3 mm
7 kg
Bshw7xvc
The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.
Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.
ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.
All the benefits in a n...
Suitable for outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc outlet Ø 22 - Ø 76
Advantage: Quick and easy release
Wall thickness (steel): 5 mm
Bhkbknqnnf
Wall thickness (stainless steel): 3 mm
Weight: 93 kg
Operation: Electrical (2.2 kW)
Application: round, square and rectangular tubes
Easy to operate
With the motor-driven pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½")...
3
Absolute Top off the line Pipe Grindingmachine.
The machines from Almy are developped and made in the Netherlands.
The ALMI AL100U-01:
Grinding Capacity: Ø20 mm - Ø76,1 mm
Grinding Angle: between 90 - 30 degrees
Motor: 3kW
B0y0llmqp3
Grinding belt: 2000x100 mm
- Controlled with a lever.
- 42,4 mm grinding role included with the machine
- 5 Grinding belts inculded with the machine
- quick changing off the grinding rolls aswell as the grinding belt.
*other grinding rolls and roll holder not sta...
7
Used Almig dryer ALM150
Year of construction 2017
Technical specifications:
Model: ALM 150
Medium: compressed air, free of aggressive components
Volume flow: 2.33 m³ / min
Working pressure: 7 barue
Operating pressure max .: 16 barue
Compressed air temperature inlet: 35 ° C
Compressed air temperature inlet max.: 49 ° C
Ambient temperature: 25 ° C
Ambient temperature max .: 43 ° C
Ambient temperature min .: 4 ° C
Pressure dew point: +3 ° C
Compressed air connection: 1 "
Electrical power supply: ...
48,3 / 60,3 mm
1 1/2", und 2" Zoll
wall thickness max. 4 mm
wall strength VA 3 mm
Ccsqmx9
weight of the machine ca. 15 kg
5
neu
ca. 2 Wochen ab Auftragse
Niederlande
3880
100 x 2.000 mm
Ikufz98
20 - 76,1 mm
1
1
3 kW
220 kg
The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind...
27 / 34,8 / 42,8 /49 / 60 mm
3/4", 1", 11/4", 11/2", 2 Zoll
wall thickness max. 5 mm
wall strength VA 4 mm
voltage 230 oder 400 V
total power requirement 2,2 kW
Benmgl90h2
weight of the machine ca. 93 kg
5
neu
ca. 2 Wochen ab Auftragse
Niederlande
3330
100 x 2.000 mm
20 - 76,1 mm
1
P2022
3 kW
190 kg
The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of...
26,9 / 33,7 / 42,4 mm
3/4", 1", 1 1/4" Zoll
wall thickness max. 4 mm
wall strength VA 3 mm
weight of the machine ca. 8 kg
You can use the AL1 pipe notcher to cut pipes with an outside diameter of Ø26.9
(3/4), Ø33.7 (1) and Ø42.4 (1 ¼).
The devices with manual control are easy to mount on the wall.
With ALMI pipe notchers, filing or milling pipes is a thing of the past
at. The big advantage over other notching tools is that with only
Bhk9awma
Several diameters can be notched in one set w...
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
6290
119.51
1
150 x 2.000 mm
20 - 114,3 mm
1
1
4 kW
270 kg
The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.
The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.
The ...
1
neu
ca. 2 - 4 Wochen ab Auftr
Niederlande
5170
98.23
150 x 2.000 mm
20 - 114,3 mm
1
1
4 kW
Svaoxs
270 kg
The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.
The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.
The ALMI AL150 can be ...
11
I am selling a packing machine, the first owner.
Used for wrapping carrot punnets in a small family business.
With the machine you get spare belts for the entrance belt.
The machine is working and maintained, the reason for the sale is the transition to a flowpack machine.
Waldyssa Automac A33 strech foil wrapper
The machine is designed for a product packaging in stretch film.
Capacity: 28 units
minSize of the product: 90x110x10 mm - max standard: 200x300x160 mm
Foil thickness: 12-35
Fil...
3
Waldys
Ngoj9
stretch film wrapper
designed for packaging food products on trays, fruit, veg, meat, fish, cheese, poultry to retain freshness and presentation, min pack dimensions 90mm L x 110mm W x 10mm H, max dimensions 200mm L x 300mm W x 160mm H, width of film 280mm - 550mm
Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor
-Rotary valve: completely overhauled
-Manufacturer: Rota Val, rotary valve type HD 300 with drive
-Drive motor: SEW Eurodrive 0.37 kW
-Speed: 1400/33 rpm
-Inlet opening: 300 x 300 mm
-Outlet: 300 x 300 mm
-Dimensions: 720/700 / H460 mm
-Weight: 183 kg
Tjkvf92n
SCREW COMPRESSOR ALUP ALLEGRO 40
Variable speed (inverter)
40 KW engine,
Capacity 6.05 m3 / min,
Pressure 13 BAR,
Year of production 2007
Qfu2v
Mileage 12524 MTG
THE MACHINE IS FULLY OPERATING.
COMPRESSOR AFTER SERVICE CHANGE FILTERS AND OIL.
WE HAVE A LARGER NUMBER OF COMPRESSORS FOR SALE
SCREWS, REFRIGERATION DRYERS AND EQUIPMENT
WELDING.
9
Steam boiler Omnical 33HD, 4t/h in very good shape. Equipment will be used until 20.06.2022. Equipped with Weishaupt G9/1-D burner. General overhaul in 2019, when we change the plates and tubes.
Water feeding pumps included.
Ddogvmf
15
5
Winch rope, crane rope, hoist rope, wire rope
-Wire rope: Ø 6 mm
-Length: approx. 33 m
-for: electric wire rope hoist
-Also other crane ropes available
Oxqxx
-Price: per roll
-Number: 4x available
-Weight: 6 kg
4
Horizontal bandsaw machine make HESKA type HES 260 AL
machine # 22430 08, year of manufacture 2008
Technical data:
cutting range 90° round 260 mm
flat 375 x 260 mm
square 260 x 260 mm
saw band size 3660 x 25 x 0,9 mm
infinitely variable band speed 17 - 106 m/min
material transport speed 2,5 m/min
max. cut-off length 500 mm
material support height 640 mm
drive power 1,1 kW
dimensions L x W x H 1890 x 1220 x 1045 mm
weight approx. 660 kg
Ddopzl7
with
- roller conveyor
- fully automatic cycle...
15
15
15
15
15
15