Used Notching for sale (344)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Giedomck Ryopfx Af Sot Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 1987, plate thickness 4 mm Giodpfoyv Ntxsx Af Sot blade length 150 mm cutting angle 30-120 ° Table dimensions 1000x650 mm

Condition: used, Year of construction: 1987, plate thickness 3 mm Giedpfxey Ihans Af Sst angle adjustable from - to 30 - 120 Grad table height 900 mm weight ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel; cutting angle continuously adjustable from 30° to 120°; pneumatic clamping for angle adjustment (Boschert system); machine is in good condition

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW Gedpfx Aoxaaiiof Sjit weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Year of construction: 2026, condition: new, Universal notching saw; Height 1.100 mm; head +/-180 degrees. Saw stroke 900 mm, blade diameter 500 mm Gsdpsd A Huwsfx Af Sjit

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Gsdoyfhvpjpfx Af Soit Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Gjdpfx Ajy Rf Ubef Ssit Stepless angle adjustment 30 - 120° Drive power approx. 4 kW

Condition: used, Year of construction: 2012, gebraucht 2012 9690F prompt, Zwischenverkauf v China Gsdpfxsynm Dds Af Soit 690 € 1 100 mm 3 mm 90 ° 90 kg Adjustable stops on both sides Finger guard

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4422550994025, Offer 26088 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: 400 x 16 mm - or: 300 x 18 mm - Section Steel Shear - L- and T-iron at 90°: 130 x 12 mm - Square bar / round bar: 40 / 40 mm Gijdpey Nk Rlsfx Af Sjt - Notching Unit - With square notcher for sheet metal up to approx. 13 mm - Notch depth approx.: 70 mm - Notch width approx.: 52 mm - Punching Unit - Punching force approx.: 60 t - Throat depth: 400 mm - Stroke approx.: 10 to 50 mm - Punches steel up to Ø 31 in 15 mm - Electrical contact stop - Various punch dies and matrices - Drive: 400 V / 5.5 kW - Space requirement: W 1100 x H 2000 x D 1700 mm - Weight approx.: 2100 kg

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t Gsdeg Ip Efepfx Af Seit cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Godpfx Afoyzcpdo Ssit

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg Godpfx Afsu Rarts Soit - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: excellent (used), functionality: fully functional, tool diameter: 450 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 400 kg, cutting height (max.): 153 mm, saw blade speed: 2,800 rpm, mount diameter: 40 mm, power: 0.003 kW (0.00 HP), Equipment: rotational speed infinitely variable, GRAULE facade saw type AS 450 Godethdrwopfx Af Sjit transport 350 EUR

Condition: good (used), Gebruikte inkepingmachine van Euromac Gedjywg S Ispfx Af Seit Type: 250 4 s Capaciteit: 250 x 250 x 4 mm

Condition: used, Year of construction: 1991, pressure 4 t throat 200 mm stroke 9,5 mm no. of strokes 280 - 1400 /min distance table/ram, max. stroke up, adjustment up 215 mm table surface area 320 x 160 mm Table height above floor 940 mm ram surface 140 x 75 mm ram adjustment 20 mm diameter of blanks - 600 mm no. of flutes 6 - 120 Giodpfxsyx Ikbo Af Sst material thickness 1,0 mm distance between mid parts spindle and mid ram 15 - 250 mm power requirement 3,0 kW Weight 4,30 kg dimensions of the machine (WxDxH) 1,2 x 2,2 x 2,0 m with infinitely variable drive (Stöber), pneumatic clutch-brake combination (Ortlinghaus), manual ram adjustment, pneumatic clamping of the blanks, automatic stripping device, manually adjustable table plate, manual adjustment of the punching radius, fully automated centralized oil lubrication, noise cancelling cabinet

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 810, sheet thickness (max.): 4 mm, overall weight: 550 kg, working length: 200 mm, TECHNICAL DETAILS Sheet thickness: 4 mm Sheet length: 200 mm MACHINE DETAILS Total power requirement: 3 kW Dimensions & Weight Space requirement: approx. 1.0 x 0.8 x 1.0 m Machine weight: approx. 550 kg Giodpfx Afeywg Nme Set

Condition: good (used), Year of construction: 2012, machine/vehicle number: 753, Offer 26125 Technical Data: - Cutting length up to 150 mm - Cutting thickness – at 400 N/mm² strength: 4 mm – at 700 N/mm² strength: 3 mm - Cutting angle steplessly adjustable: 30° – 120° - Pneumatic clamping of the cutting angle adjustment Gedpfx Afsy Dqmve Seit - Stroke: 22 mm - Strokes per minute: 60 - Table surface with T-slots and depth stops - Table height: 900 mm - Drive: 400 V / 3 kW - Electric foot pedal - Space requirement approx.: W 1000 x H 1150 x D 1400 mm - Weight approx.: 850 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Model: 220 6 S Capacity: 220 x 220 x 6 mm Gsdpeyu H T Eofx Af Ssit

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed Giodpey Ddv Rofx Af Sst - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 17100 € 328.32 € 200 mm 4 - 6 mm 2 - 3 mm 30 1/min Gedpfx Aewiq Tgsf Seit 30 - 140 ° 4 kW 900 mm 1150 mm 1240 mm 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Max. thickness (420 N/mm²) : 6 mm (at 60°), 4 mm (at 140°) Max. thickness (600 N/mm²) : 3 mm (at 60°), 3 mm (at 140°) Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm 407 weight of the machine ca. 760 kg Giodpfx Afsyv N Hls Set dimensions of the machine ca. 1300x1000x1150 mm

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm Gisdpfsyv Nz Asx Af Sjt throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Machine in stock Godpfxjd Nh S Ns Af Seit Specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping Gisdjyz S Trepfx Af Sst - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Godpewfymnefx Af Seit Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Built in 2000