Used Notching for sale (374)

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg Lsdexabpdepfx Akqeru range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU Lrodpfx Asxabx Eskqju angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg Lodpfx Akeyfchgsqsru

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm Lredju Rartopfx Akqsu - Weight of station 2 approx. 500 kg

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T Lrjdjz Hwidepfx Akqeu

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Lredpfx Akswfymzsqsu Machine equipped with an extra-large machine table with double T-slots parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0156084906226, Offer 23145 Hydraulic Flat, Profile, and Bar Steel Shear with Notching Device and Punching Unit Technical Specifications: - Flat Bar Shear - Blade length: 420 mm - For flat material: 400 x 15 mm - Profile Steel Shear - No blades installed - Angle steel at 90°: 110 x 10 mm - at 45°: 65 x 8 mm Ledpfjy Ddv Rsx Akqjru - T-steel at 90°: 90 x 10 mm - Bar Steel Shear - No blades installed - Round steel / Square steel: 35 / 32 mm - Notching device - For material up to 12 mm - Triangular notching: T 60 mm - Punching unit - Punching force: approx. 500 kN - Stroke, infinitely adjustable: 0 - 40 mm - Punches steel up to 30 mm Ø in 15 mm - Throat depth: 410 mm - Hydraulic drive: 400 V / 7.5 kW - Space required: approx. W 1400 x H 1800 x D 700 mm - Weight: approx. 1800 kg - Includes: various punches and dies, support/stop table, triangular notching unit, 2 foot pedal switches

Year of construction: 1990, condition: good (used), machine/vehicle number: V 254xxx, Item No. 22462 Lrodpfx Ajiluqmskqsu Technical data: - Cutting length 250 mm - Cutting angle 90° - Cutting thickness: - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - Stroke rate up to approx. 55/min - Table size: W 800 x D 800 mm - Working height approx. 940 mm - Stops adjustable continuously in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E - Foot pedal - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

Condition: excellent (used), Notching saw GRAULE AS450 Ljdpjl Skkfofx Akqjru Shipment EU ~300euro

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Technical data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting thickness: - Normal steel: up to 4 mm - Stainless steel: up to 3 mm - Aluminum: up to 5 mm - Stroke rate: up to approx. 55/min - Table size: W 800 mm x D 800 mm - Working height: approx. 940 mm - Stops adjustable steplessly in length and degrees - Drive: 400 V / 4 kW - Oil capacity: 50 l - E-foot switch - Space requirement: approx. W 800 mm x H 1250 mm x D 900 mm - Weight: approx. 700 kg Ljdpfx Aksif Aqvsqoru

Year of construction: 1990, condition: good (used), machine/vehicle number: V 206 769, Offer 22346 Lrsdpfsi Hpdyex Akqsu Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment: 30 - 135° - Stroke rate: 60 1/min - Table surface with T-slots: 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height: 860 mm - Drive: 400 V / 2.2 kW - E. - Foot switch - Space requirement: approx. W 1000 x H 1650 x D 1700 mm - Weight: approx. 1300 kg

Condition: used, Year of construction: 1985, plate thickness 4 mm cutting length 225 mm blade length 225 x 225 mm table surface area 710 x 500 mm total power requirement 3,5 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 0,8 x 1,1 m 90° Notching machine Large table Adjustable stops Lredpfx Aezyyy Iskqju Footswitch Emergency stop switch Scrap collection bin

Year of construction: 2000, condition: used, Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible. Lrodpjzybt Njfx Akqou

Condition: used, Year of construction: 1999, plate thickness 3-4 mm Lredpfx Akoynbczoqeu pressure 0 t Cutting length 220 mm table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Ledoliuihspfx Akqsru Anschlag weight 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1989, plate thickness 4 mm cutting angle adjustment 30-120 ° table height 900 mm 407 weight of the machine ca. 760 kg Ljdeyv N Hljpfx Akqjru dimensions of the machine ca. 1300x1000x1150 mm

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm throat 300 mm table height 900 mm work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW weight of the machine ca. 2.000 kg Ledpfxeyv Nz As Akqoru dimensions of the machine ca. 1500x1300x1400 mm

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Lodpfxszd Ei Ao Akqoru

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: Lrodpsv Uytzofx Akqeu - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 Lodpfjmck Ryjx Akqoru - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm Ledpoiqgd Eefx Akqoru - Stepless cutting angle adjustment: 30 - 120° - Pneumatically clamped - Automatic cutting gap adjustment - Locking stops on the left and right, each 300 mm - Table surface area: 1000 x 800 mm - With T-slots and depth stops - Table height: approx. 900 mm - Depth stops - Drive: 400 V / 4 kW - E – foot pedal - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Lredpfx Aksyr A Umsqou

Condition: as good as new (ex-display), plate thickness 2.0 mm Lredpfxew U U Tyj Akqeu tube diameter max. 60.0 mm motor 400 Volt

Year of construction: 1994, condition: excellent (used), Hydraulic notching machine Manufacturer: BOSCHERT, Type: K30-120 Very good condition, year of manufacture: 1994 Lodpfx Aohygztekqoru Technical data Manufacturer: BOSCHERT Type: K30-120 Year of manufacture: 1994 Cutting capacity: 6 mm in St 40 / 4 mm in stainless steel Blade length: 200 mm Cutting angle: 30-120° Working stroke: 40 mm Table height: 900 mm Connection power: 6 kVA Weight: approx. 1600 kg Dimensions: approx. 1500 x 1200 x 1300 mm All information is without guarantee. The machine is in very good condition. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Lodszu Anwjpfx Akqoru Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.