Hydraulic - Uni. - Notching machine

INDUMASCH 206

Condition: used, Year of construction: 1993, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Kodsu Eh Rgopfx Agzsnf Blade length: 200 mm Digital angle displays right and left Weight: approx. 1,200 kg Good condition

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm Ksdpfxjftuywj Agzsnf distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: used, Year of construction: 1992, plate thickness 6,0 mm ST Kodpfxju Dbv Tj Agzjnf plate thickness 4,0 mm VA table-size 780 x 1000 mm blade length 200 x 200 mm strokes per minute 60 min engine output 3 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1400 x 800 x 1300 mm Features: - Electro-hydraulic notching machine - 3x locking precision stop - Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels - Electric stroke adjustment via digital display - Replacement blade (used) - Machine light - Side cut material ejection - Freely movable foot switch - Operating instructions

Condition: good (used), Technical data: Hydraulic angle-adjustable notching machine Manufacturer: Indumasch Type: 206/N Table dimensions: 1000x800 mm Cutting thickness: 6 mm (unalloyed steel) / 4 mm (stainless steel) Blade length: 200 mm Cutting head stepless: 30-135 ° Total power requirement: 3 kW Machine dimensions: approx. 1660mmx1000mmx1500 mm (LxWxH) Machine weight: approx. 1100 kg Knsdeu A Iutspfx Agzef

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Knodpfowq Dpqjx Agzof Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Year of construction: 1990, condition: good (used), machine/vehicle number: V 206 769, Offer 22346 Technical data: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm Knjdsi Hpdyspfx Agzof - stainless steel up to 4 mm - stepless cutting angle adjustment 30 - 135 ° - stroke rate 60 1/min - table support surface with T-slots 800 x 1000 mm - depth stops with dimension scale and angle adjustment - table height 860 mm - drive 400 V / 2,2 kW - E. - foot switch - space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

Condition: used, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm knife sharpened Kedpfx Ajt D R Nnsgzonf Weight: approx. 1,200 kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz Knodpfsd N H A Nox Agzjf - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Knoderu Unbspfx Agzef

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm Kodpfonr E Enjx Agzsnf with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.