Used Sawn for sale (61)

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm Cedpfx Aqer Ak Rgsvohd infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Chjdpfxew S Eylj Aqved

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Chjdpfx Ajt E Nw Toqvjd

Condition: excellent (used), 3.0 m for load capacities of up to 3 tonnes per metre of rail or 600 kg per roller, roller diameter 125 mm with roller bearings, overall height approx. 140 mm 7.9 m for load capacities up to 1.8 tonnes per metre of rail, support rollers Ø 80 mm running on stainless steel tubes spaced at intervals of just 50 mm, overall height 105 mm Cjdpfx Aeyzyf Ajqvjhd 11.1 m for load capacities up to 2 tonnes per metre of rail, cast support rollers Ø 65 mm spaced at intervals of 60 mm, overall height approx. 80 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Chjdpfoyz Ia Ijx Aqvsd Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2018, functionality: fully functional, ROUNDWOOD PROCESSING LINE Line supplied by MSK a.s. in 2018, supplemented with a vertical band saw from J. Bögli AG. The line was built in 2018. The band saw is older, but its exact year of manufacture is not known. The band saw can process logs with diameters from 30 cm to 100 cm; the maximum log length is 10 metres. The line itself is designed for a maximum length of 5 metres. When longer logs are sawn, they can be discharged from the band saw via conveyors No. 15 and No. 16. Chedozta Ifjpfx Aqvod The cant cross-cut saw has a minimum cutting length of 800 mm and a maximum length of 5 metres. The twin-shaft multi-rip saw has a maximum cutting height of 215 mm and a maximum width of 600 mm. In 2024, the line was supplemented with a Skywood twin-shaft circular saw for processing small-diameter logs from 12 cm to 46 cm. Log length: minimum 2 m, maximum 5 m. The line can operate in parallel (band saw and Skywood) or independently with either one of these machines. Required staffing for line operation: Band saw 1 Skywood 1 Cant cross-cutting 1 Multi-rip saw 2 Cross-cutting, edging and sorting of side boards 2-3 JCB / forklift 1

Condition: used, Roller Conveyor Used roller conveyor with adjustable legs. Suitable for infeed and outfeed of boards, beams and sawn timber at saws, planers and other woodworking machines. Specifications: Length: 6 m Width: 90 cm Codps Ah Rnpefx Aqvohd Legs: adjustable, height 45–65 cm Rollers: free-running, housed bearings Frame: powder-coated steel

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor Csdpfov Hm T Sox Aqvohd - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Year of construction: 1993, condition: used, Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power connection: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: Chjdpfxoz R S The Aqvjd - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84 kW Multi-blade saw Dimensions Length: 3440 mm Width: 1900 mm Height: 1700 mm Cutting parameters Maximum diameter of logs to be sawn: 450 mm Diameter of circular saw: 630 mm Minimum width of the center stack: 60 mm Maximum number of saws per spindle: 4 2 spindles, one on top, one on the bottom Csdpfxjz H T Ays Aqvohd Motors Power of the motor for the lower drive: 52 kW Power of the motor for the upper drive: 41 kW Spindle speed: 1480 rpm Infinitely variable feed speed: 0–15 m/min (0–25*) Power of the motor for the feed drive: 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length The multi-blade saw is immediately available and ready for use. Loading onto the truck will, of course, be handled by us.

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons maximum width: 600 mm inner and outer coil diameter: 508–920 mm hydraulic jaw expansion: 460–640 mm 4 kW Roll forming line Type H 18 stations maximum width: 600 mm maximum thickness: 0.8 mm shaft diameter: 60 mm maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use; new value 450,000 euros Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: Codpfxjz R S T Ue Aqvshd - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Chedpfxszzad No Aqvsd It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Condition: used, Empty weight: 8.700 kg Dimensions (LxBxH): 90 x 72 x 110 cm Serial number: 98077 Control system: Mazatrol M32B X-axis: 1050 mm Y-axis: 510 mm Z-axis: 560 mm Work table dimensions: 1300 × 550 mm Maximum load: 1,500 kg Spindle: Taper: BT50 / CAT50 Speed: 25 – 6,000 rpm Power: 15 kW / 18.5 kW (peak) Tool changer: 1 Capacity: 30 tools Weight: 8,700 kg Power supply: 380 volts Overall dimensions: 3,000 × 3,800 × 2,250 mm Includes: Matching tool cabinet with various tool holders Tool cabinet dimensions: 900 x 720 x 1100 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. Csdpfsz R S Tujx Aqvohd The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2009, Circular saw KASTOflex F in good condition, documentation included. Can be tested in Kaunas. Specification Model: Kastoflex F Year: 2009 Weight: 2700 kg Power: 13 kW Dimensions: length 4800 x height 2225 x width 2580 Automatic feeding, dumping Sawn conveyor Corner cutting Chjdpfjwfd Icsx Aqved Pressure CNC controller Cutting at an angle of 90 (round, square, flat) 150 / 140 x 140 / 200 x 100 mm Cutting at an angle of 45 (round, square, flat) 145 / 120 x 120 / 160 x 80 mm Cutting at an angle of 60 (round, square, flat) 115 / 100 x 100 / 120 x 60 Disc diameter (Ø 350 mm opt.) Ø 400 to 450 mm If If you have more questions, we will be happy to answer them.

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center Cedpfoxa Ettsx Aqvjhd - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Chjds Aayi Hopfx Aqvod Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: used, Empty weight: 12.500 kg Dimensions (LxBxH): 725 x 287 x 178 cm Serial number: 152040 Control system: Mazatrol L32B X-axis: 2685 mm Y-axis: 1270 mm Z-axis: 100 mm Indexing table: yes Cutting capacity: 25 mm Maximum workpiece dimensions: 2,500 × 1,250 × 25 mm Maximum load: 615 kg Nominal laser power: 4,000 W Laser type: CO₂ – YB-L400A 8M Machine weight: 12,500 kg Includes Donaldson exhaust system Length: 7,250 mm Width: 2,875 mm Height: 1,780 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: Cedpez R S Tbefx Aqvohd - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: - Workpiece length: 55–170 mm Chjdpfx Aqsztvzhjvjd - Workpiece height: max. 27.5 mm - Workpiece width: max. 28 mm - Milling units: 2 - Cross-cut saw: 1

Condition: new, Year of construction: 2026, The CORMAK S910 band sawmill is a technologically advanced machine designed for professional cutting of large-diameter logs. Powered by a 22 HP petrol engine, this wood sawmill is ideal for locations without access to mains electricity, while maintaining high cutting precision and efficiency. The machine is suitable for both mobile sawmills and wood processing facilities. Main Advantages The RATO R670 22 HP petrol engine provides complete independence from the electrical grid. Maximum cutting width of 910 mm without guides. Maximum cutting width of 750 mm with guides. Maximum cutting thickness of 475 mm allows the processing of large-diameter logs. The four-column construction ensures stable guidance and low vibration levels. Dynamically balanced cast-iron drive wheels ensure precise and smooth blade operation. The cooling and lubrication system protects the blade against overheating and extends its service life. Manual feed and cutting unit height adjustment allow the machine to be adapted to different types of wood. Construction and Technology The CORMAK S910 is built on a reinforced bed made of steel profiles and features a four-column cutting unit guidance system, providing high rigidity and cutting precision even during prolonged operation. The 35 mm wide and 4000 mm long bandsaw blade operates at a speed of 17 m/s, producing a kerf of only 1.4–2.2 mm, which significantly reduces material waste. Cutting Precision and Efficiency The blade height can be adjusted from 47 mm to 740 mm, allowing the log to be precisely divided into multiple sections. The 6000 mm track length makes it possible to process even very long workpieces. A solid guide and adjustable stops stabilize the material being processed, positively affecting cutting repeatability and quality. Applications The CORMAK S910 wood sawmill is designed for use in mobile sawmills, wood processing plants, forestry operations, and companies producing sawn timber. It is ideally suited for cutting both softwood and hardwood. Chodpfx Aqezzxqnevsd Standard Equipment High-performance RATO 22 HP petrol engine 4000 × 35 mm bandsaw blade (included free of charge with purchase) 6 m long track Cooling and lubrication system Log clamping system with adjustable stop Bandsaw blade guard Optional Equipment Additional track sections Spare bandsaw blades Cutting height measurement system Manual or automatic longitudinal feed Technical Specifications Specification Value Engine type Petrol Engine power 22 HP Starter Electric Max. cutting width without guides 910 mm Max. cutting width with guides 750 mm Max. blade height 770 mm Min. blade height 47 mm Max. cutting thickness 475 mm Cutting length 6000 mm Bandsaw blade guard Yes Blade width 35 mm Blade length 4000 mm Flywheel diameter 470 mm Flywheel width 25 mm Blade speed 17 m/s Kerf 1.4–2.2 mm Coolant tank capacity 12 l Feed Manual Machine dimensions (L × W × H) 6000 × 1980 × 1810 mm Net weight 520 kg

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material Codpfx Aqoyu U Dfevehd 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Cjdpfx Aoxg Ubyjqvehd Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Cjdsvrvq Djpfx Aqvehd Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Year of construction: 2026, condition: new, functionality: fully functional, Fully Automatic Board Sorting and Sawing System for Sawmills With its fully automatic board sorting and sawing system, JAC Automation & Robotics GmbH offers a powerful solution for significantly reducing manual operations in sawmills and wood processing companies. The system handles the entire process, from the unsorted raw material stack to the finished, sorted, and stacked boards. A reference system is already in successful operation at a sawmill. Your advantages • fully automatic and autonomous system operation • significant reduction in manual handling • relief from personnel shortages • fewer errors due to incorrect sorting • reproducible quality • automatic stacking • flexible allocation based on length and width • automatic defect detection • modular, expandable design In the current manual process, an employee may have to pick up and move a board up to four times. With the automated system, this handling is completely eliminated. Workpiece range • Length: approx. 1,700–5,200 mm • Width: approx. 95–310 mm • Thickness: approx. 30 mm • other dimensions available upon request Cjdpfezz Sugjx Aqvehd Automatic process The raw boards are picked up by a KUKA robot and automatically fed to the measuring and sawing station. Length and width are determined using laser sensors. In addition, boards that are too severely warped can be detected and automatically sorted out. Each board can be sawn at both ends. Alternatively, a pure sorting operation without sawing is also possible. Sawdust and waste are automatically transported via a chute and a conveyor belt to a waste container located outside the system. Flexible sorting The reference system has: • 10 freely configurable sorting and stacking locations • 2 reject locations • 2 raw material locations The operator can freely define which length and width ranges are placed on which stacking location. The finished boards are stacked fully automatically. Optionally, intermediate strips can be inserted between the individual layers. Performance With a high variety of products, the reference system achieves approximately: • 4 boards per minute • up to approximately 240 boards per hour Technology • 2 × KUKA KR 120 R3900-K • 1 × KUKA linear unit • Siemens S7-1500 • Siemens F-CPU • 19" touch panel • WinCC Runtime • Production and piece count recording • Remote maintenance via Weidmüller router • Safety fence and Keyence light curtains Individually adaptable The system is newly manufactured and planned according to customer specifications. Layout, workpiece range, number of sorting locations, and the range of functions can be adapted. Optionally, an expansion with AI-based camera technology for detecting wood defects and quality characteristics is possible. Reference area: approx. 25 × 15 m JAC handles the complete project management, including design, manufacturing, programming, assembly, commissioning, and training. Delivery time: approx. 6-8 months after technical clarification and order release. Europe-wide delivery and commissioning are possible. Price on request.

Condition: excellent (used), Band sawmill consisting of: - Tension carriage EWD EW 1000 - Band saw EWD EBB 1400 - Roller conveyor for transporting the sawn goods (manufacturer SPRINGER) - Raised cabin - Tracks - Control cabinets - Accessories Optionally with complete sharpening room equipment: - Sharpening machine Vollmer CAL 200 - Upsetting machine Vollmer PMH - Flanking (leveling) machine Vollmer EMS Log band saw EWD Esterer EBB1400 Cedpfx Aqjvtwzmsvohd Vertical band saw for round wood Roll diameter: 1400 mm Roll width: 200 mm Saw blade width: 206 mm Saw blade thickness max. 1.47 mm Blade speed max. 55 m/s (winter & summer drive pulley available) Main motor: 55 kW The roller crowning was reground in 2009 Band saw carriage EWD Esterer EW1000 hydraulic tensioning carriage Year of manufacture 1991 4 tensioning blocks with 3 log turners tensioning block opening max. 1000 mm hook opening max. 930 mm total length: 6000 mm total width: 2450 mm total height: 1750 mm track width 1300 mm The band sawmill was bought second-hand in 2004/2005, reinstalled by Esterer, but never put into full operation as cutting is almost exclusively done with the gang saw. The band saw has only run for 500 operating hours since 2004! very good condition - available immediately - can be demonstrated by appointment Sharpening room equipment: 01. Vollmer CAL 200 sharpening machine Year of manufacture 2000 Tooth feed from the left CNC machine for grinding cutting and block band saw blades with straight grinding and wet grinding Full enclosure with extraction for CBN and corundum grinding wheels Incl. 2 Borazon grinding wheels 10mm 02. Vollmer PMH upsetting machine Saw upsetting machine for band saw blades Max. blade thickness 3.5 mm 03. Vollmer EMS flank/leveling machine Leveling machine for upset band saw blades converted to self-drive in combination with CAL 200 incl. limit switch on the saw clamping! Further details: The sharpening machines were purchased second-hand in 2007 and stored covered on pallets or wooden structures in a dry, heated garage. Because the band saw was never put into full operation, the sharpening room equipment was repeatedly postponed, so that today the machines are in the same condition as when they were delivered. All operating instructions, descriptions and circuit diagrams are neatly enclosed in a box. In 2018 and 2023 the machines were cleaned of surface dust outside, lightly oiled with graphite spray and stored in the garage again! immediately available - fully functional - very good condition Location: Austria, near St. Pölten

Condition: new, mileage: 150 km, power: 382 kW (519.37 HP), first registration: 01/2026, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 61,000 mm, loading space width: 25,400 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work light - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air-suspended seats - Air horn - Particle filter - PTO - Radio/Multimedia system - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield Internal number for customer inquiries: 3-039 MAN TGS 33.520 6x4 BL short log platform body with quick-change stakes and crane of your choice! Wheelbase 3,900 mm !! IMMEDIATELY AVAILABLE IN STOCK !! *EURO 6E!! * TM cab: the comfortable one (narrow, long, medium height) * All-wheel drive 6x4 * Suspension type: leaf/air (BL) * 3,900 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 hp output, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD, with Retarder 35 * Retarder Eco, speed-dependent, adjustable, energy-efficient * High-performance engine brake MAN EVBec, adjustable * Differential lock Rear-driven rear axles * Trailer coupling on rear crossbeam, RINGFEDER type 4040/G150B * Control panel MAN EasyControl, 4 functions, can be operated from outside when the door is open * Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * Multifunction steering wheel, leather, adjustable in height and inclination * Bunk, lower, with slatted frame and head adjustment * Sun visor, front windshield, inside, electric * Refrigerator, pull-out, and drawer * Infotainment control MAN SmartSelect with touchpad and direct access * MAN Media System Navigation Professional 12.3 inches * MAN Sound System Advanced with subwoofer * Smartphone integration * and more. Body: * Loading length up to crane base 6100mm (Austria and South Tyrol special) * The platform itself has the following dimensions: length approx. 5700mm, width 2540mm * Platform color: Black * 8x OPTIPA ALU10 stakes with quick-change wedges, so the stakes can be removed at any time (for transporting, for example, sawn timber, straw, hay or silage) * Storage of the stakes upright in front of the front wall * Toothed strips between the pockets * Tie-down points in the outer frame * Sturdy steel front wall * Pull-out ladder at the front and rear to access the platform * Preparation for manual belt tensioners (Autonordic) or alternatively air tensioner (ExTe TU) * Toolbox under the loading area, made of stainless steel Crane: Optional: - Palfinger TZ15 9.8 - Palfinger Epsilon Q150Z 9.6 - TajfunLIV 150Z 9.6 - TajfunLIB 150Z 9.6 cabin crane Financing possible via our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. Csdpfx Aoy T Nb Reqvshd General information Cab: Long-distance transport Technical information Number of cylinders: 6 Engine displacement: 12,419 cc GVW: 33,000 kg...