Used Veneer Saw for sale (6,160)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Like-new, very well-maintained veneer saw with planing unit. Maximum cutting length: 3050 mm. Equipped with rear support and finger stop. Cedj Ahy H Hopfx Aktjri

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. Codpfx Ao Afznusktsri When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a scoring unit and veneer stop table. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 4200mm. The saw unit and scoring unit are combined in a single unit, so that only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the scoring blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with a continuous finger stop, adjustable from approx. 2 - 50cm, with pneumatic clamping. Pneumatic workpiece clamping. Cjdpfxo Ahrgae Aktori Veneer support made of wear-resistant hard plastic. Drive motor 2.2kW. Carbide-tipped precision cutting blade, sharpened. Scoring blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. Onboard tools. Saw blade and re-cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Codpfewq D Tpsx Aktori Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.-

Condition: good (used), Year of construction: 1999, Saw with planing head unit Cutting length: 3020 mm Year of manufacture: 1999 Equipped with a rear support table and stop with positioning indicator Crsdpfxsz Hcgno Aktsi Space requirement: 4.78 x 1.56 m

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Codpfxovwf Age Aktori

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Crsdpsyku U Nofx Aktsi Motor output 1,8 kW machine weight ab. 500 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1524/1, Ludy machinery for cutting veneer and producing veneer edging. Suitable for the precise cutting of veneer into strips and for preparing edging for furniture manufacturing. Robust construction, simple operation, ideal for production environments. Codezg Dpajpfx Akteri

Condition: used, functionality: fully functional, cutting length (max.): 3,015 mm, saw blade diameter: 180 mm, USED VENEER SAW FOR SALE IN USED CONDITION! Crodpfx Akszlhmaetoi

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm – cutting width on the right side: 960 mm – saw motor: 3 kW – milling cutter motor: 1.5 kW – feed motor: 0.75 kW – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg Cjdpfxjw I Efge Aktori

Condition: used, machine/vehicle number: 650597, Motor: 1.65 kW Cutting length: approx. 2450 mm Saw blade diameter: approx. 150 mm Pneumatic blade tensioning Space requirement: approx. L x W x H mm 3000 x 1000 x 1600 Crodpfx Akjimd D Aotei Ex works, from Seevetal location, subject to prior sale, Sold as is, without transport.

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Cjdew U D U Hjpfx Akteri

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Front and rear support tables Cedpeyh It Rofx Aktori Extraction duct

Condition: excellent (used), Working width: 300 cm Cutting height: 4 cm Pneumatic clamp 1.8 kW motor Cedozvn Dgepfx Aktsri

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Credpfxjwimdue Aktoi Max. cutting length 3100 mm Functionally tested

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Crsdjz Akftjpfx Aktji Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: excellent (used), Working length 300 cm, pneumatic clamp, motor 1.65 kW Csdpfx Akjygxgboteri

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit max. cutting length 3050 mm no rear stop included Crsdpoyizztsfx Aktoi

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Cedpfxszcc I Uj Aktjri Maximum cutting length: 3100 mm. Equipped with a rear support and finger stop.

Condition: used, Used machine Equipment and technical data: Crsdpfxozyyzxs Aktei

Condition: excellent (used), Veneer saw with automatic feed Pendant control panel with all the operating elements and displays required for machine control Feed speed adjustable Solid and torsion-resistant machine frame Double profile linear guide system for the saw and rabbeting unit Solid pneumatic pressure beam with rack and pinion compensation Saw and rabbeting unit raises and lowers pneumatically Cutting and rabbeting height continuously adjustable Rabbeting unit with chip extraction device Front support table, pneumatically adjustable (rabbeting position) Rear support table with width stop, stop depth 15 - 600 mm Width stop with handwheel adjustment and digital dimension display on the control panel Central lubrication point with 14 lubrication points Dust extraction duct Tool holder CE incl. saw blade & router tool Cutting length 3700 mm Cutting width 600 mm Cutting height max. 45 mm Cjdpfoz U I Rcex Aktori Working height 850 mm Motor power - saw 2.2 kW Motor power - router 1.1 kW Compressed air 5 - 6 bar Extraction capacity 815 m3/h (at 20 m/s) Extraction connection 120 mm Weight approx. 1200 kg Space requirement L x W x H approx. 5200 x 1550 x 1600 mm Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty claim. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address + telephone number!)

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Maximum cutting length: 3050 mm. Equipped with a rear finger stop. Codpfxszlqbas Aktjri

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Crjdpfx Aozk Nvtsktei Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Features and Technical Specifications: Csdpfxszlbtye Aktjri - For cutting all types of veneer - Tight joints and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball-bush guide) - With front support table and dust duct - Sliding stop from the front via position indicator - Veneer clamping via pressure beam using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg Availability: Immediate Location: 63934 Röllbach

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Credpfx Aksyl Tiuetsi Workpiece clamping: pneumatic