Used Veneer Patcher for sale (527)

Condition: excellent (used), Year of construction: 2009, Josting Veneer Guillotine with Cross-Cutting Machine The machine precisely cuts veneer bundles in a straight and parallel manner. For all types of veneer, tight jointing after cutting is ensured. Technical features: ● Highest cutting quality thanks to an oscillating knife movement, pulling at an angle of approx. 20°. ● Parallel fence with motorized rapid adjustment, fine adjustment, and digital measurement display for cutting parallel widths and strips. ● The green alignment light clearly marks the cutting line. Nwjdpfx Aex N A D Rogzer ● Alignment grooves and an angle stop on the machine table facilitate positioning of the veneers. ● The wide pressure beam presses even wavy veneers flat and level before cutting. ● The trim-cut function hydraulically adjusts the knife beam by 0.9 mm. Square cutting edges are achieved by pre- and post-cutting with pressed veneer bundles. ● Cutting veneers across the grain is possible thanks to the powerful crank drive. ● The heavy construction safely absorbs the high pressing and cutting forces. ● Precise and durable parallel guidance of machine components. ● Full utilization of the knife due to 30 mm regrinding capability. ● Low energy consumption and reduced noise levels due to intermittent drive operation. ● Safety features include light curtain interlock, two-hand operation, safety electrical control system, and rear safety guard in accordance with occupational safety regulations. ● The machine can also cut paper, foils, plastics, and other materials. Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: 2 pressure stages Knife beam: Brake motor, gearbox crank drive Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 KW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Includes: KUPER QFS 850 cross-veneer guillotine for trimming veneer packs Location: ex-site customer - immediately available - System must be dismantled by the buyer

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Nsdpsxy Tl Rofx Agzswr Storage location: Supplier

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Nwodjx D Ngljpfx Agzjr Application Types Pressing / Laminating

Condition: used, Used machine Features and technical data: - Maximum feed-through width: - at 40° cutting angle: 250 mm - at 60° cutting angle: 165 mm - Maximum feed-through height: 180 mm - Cutting angle adjustable: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V with chassis Nwedex Nkudopfx Agzor Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: short-term Location: Flörsheim

Condition: used, Veneer Press OTT JU 90 -used- ----- Technical Specifications ----- Nwodpowmmrasfx Agzjr Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw Nsdpfjb A Hnhjx Agzjwr -Cutting length: 3000 mm -with extraction

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Nwedpfx Aeuvdzuogzor

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Njdovvkazjpfx Agzjwr Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2014, Additional Equipment Nwodex Nkm Tjpfx Agzor Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and pre-selected number of veneer strips. This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. It's a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine. Application Types Veneering

Condition: used, Used machine Equipment and technical data: - Max. feed-through width: - at cutting angle 40°: 250 mm - at cutting angle 60°: 165 mm - Max. feed-through height: 180 mm - Adjustable cutting angle: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm Nwodpjx H Danjfx Agzer - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: approx. end of January 2026 Stock location: North Rhine-Westphalia

Condition: used, Year of construction: 1968, 1 piece veneer press OTT JU 60-S Nedpfx Agsx Ifpmszswr 380V, 12kW, as per images and inspection Color: green Year of manufacture: 1968 Condition: used Payment method: advance bank transfer Storage location: workshop Shipping: Pickup only – shipping is not offered for this item!

Condition: excellent (used), Year of construction: 2001, Mayer FH2-3520 Veneer Saw, precision-cutting saw with jointing unit (planer head) and veneer alignment table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free, joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3500 mm Saw unit and jointing unit are combined into a single assembly, so only one unit needs to be moved. Easy-to-guide saw unit glides on linear guides. Nwedsx Hqtzepfx Agzsr Rear support table with pass-through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Drive motor for saw: 1.8 kW, milling (planing) unit: 1.2 kW The motors can conveniently be activated via the handle and only run when needed. Fine-cut blade fitted with carbide tips, sharpened Planer head Z4, fitted with new carbide reversible blades, spare blades included Practical front veneer storage, extendable for the planer unit Extraction connection 100 mm with extraction duct CE mark Operating manual Service tools Original paintwork, only minor touch-ups Dimensions approx. 5050 x 1700 x 1400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see "Other offers from this supplier."

Condition: good (used), Code: 0062 Brand: KUPER Nwodpfx Aex I Dwpsgzjr Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Nedpfx Aovvi Udjgzewr

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and preselected number of veneer strips. Nwjdpfxsx Nknde Agzjr This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine. Application Types Veneering

Condition: good (used), Code: 0124 Brand: ORMAMACCHINE Model: P30/3 Nwedpfx Agex I Az Tezjr Hydraulic cold press for furniture, kitchens, wooden doors, custom-made furniture, composite materials, aluminium, plastics and various materials Technical data: Platen size mm 3000 x 1200 N° 3 hydraulic pistons Opening mm 500 Total thrust ton 15 Motor Hp 1,5 Overall dimensions mm 3300 x 1300 x 2100 h Weight kg 1100

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Nsdpfxjvvkblj Agzswr

Condition: ready for operation (used), Year of construction: 2015, Additional Equipment Feeding Device: Efficient and comfortable semi-automatic feeding of veneer strips Panel Automatic: For component-matched faces with pre-sorted components and pre-selected number of veneer strips This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us. Njdpfx Agjx Nknkozewr Application Types Veneering

Condition: good (used), Code: 0276 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press for carpentry, furniture, custom-made furnishings, veneering, panels, doors, wooden window frames, composite materials and various - CE Standard Technical data: Working platens dimensions 3000 x 1300 mm Opening between platens 400 mm N° 6 pistons Total thrust 90 ton Platens with coils Platens heating with hot water via boiler complete with circulation pump and expansion tank Motor 2 Hp Overall dimensions mm 4600 x 1600 x 2000 h Nedpfxsx Iu Hus Agzjwr Weight 3800 kg

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Nwedjwmb A Tjpfx Agzsr Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Hydraulic control unit located at the upper part of the press for maintenance ease Nwjdpfx Agox Nkm Hjzer Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Application Types Pressing / Laminating

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95 Nwsdpsxtat Uefx Agzjr

Condition: good (used), Code: 0270 Brand: EMME ELLE Model: G.L.C. 1200 - CE Standard Longitudinal glue jointing machine for veneer - CE Standard The longitudinal jointing machine allows a perfect jointing of two veneer sheets in one operation by using a patentedsystem for the glue application. The machine is equipped with two tanks for the mass glue application. This innovation grants high quality and high jointing finishing since the glue is simultaneously applied on both edges to be jointed. The advantages of this type of glue processing are the following: 1_higher working speed (the machine can reach a speed of 35/40 mt/min with some wood types.) 2_In case, for any reason, no glue is applied on one of the two edges, the jointing is anyway granted since the glue is applied on the other edge as well. 3_A high resistant jointing is granted by applying the glue on both edges, since the two sheets are jointed with glue to glue and not with glue to wood. Technical characteristics Veneer sheet dimensions Thickness mm 0.4-2 Min. Length mm 360 Min. Width mm 45 Max. Width mm 1200 Nodpfxsx Ihgno Agzswr Technical Characteristics Heating area length mm 1200 Heating temperature up to 240° Transport speed 10-40 m/min Glue type UREA Power connection 6 Kw Voltage 400 V / 50 Hz Machine dimensions Length mm 2600 Width mm 2000 Height mm 800 Weight Kg. 2000

Condition: good (used), Code: 0268 Brand: CASATI MACCHINE Model: TIO 600 Hydraulic veneer trimming guillotine for trimming veneer packs Nedpfx Agjx If T Eozewr Technical data: Useful cutting length 600 mm Cutting height 55 mm Control unit motor 4 Hp Work surface height 850 mm The machine is operated by a foot pedal, leaving your hands free to move the veneer packs easily Automatic work cycle Overall dimensions mm 1500 x 950 x 1450 h Weight kg 700

Condition: good (used), Code: 0265 Brand: CASATI Model: TM 3100 - CE Standard Automatic mechanical veneer pack guillotine shear with 1 blade - CE Standard Technical data: Cutting length mm 3050 Nsdpfxex H Thnj Agzewr Cutting height mm 45 Automatic shift register Tilting square for cross cuts Full rear register protection Safety photocells Max rear feed width mm 520 Min rear feed width mm 25 Millimeter counter to read the working cutting Reducer motor Hp 1,5 Power Kw 2 Overall dimensions mm 4100 x 1300 x 1500 h Weight kg 1700