Used Veneer Machine for sale (65,695)

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm Kjdpozuz Hlefx Ak Ajna - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Kodpfx Aezuz Hfek Asna Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. Knjdpjzuzp Tjfx Ak Aea - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Knedpfxezuzpto Ak Aea Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Ksdpfxex Upgcs Ak Ajna

Condition: used, Year of construction: 1995, Max. veneer thickness: 3.0 mm Gluing system: glue application roller with roller heating Disc: Yes, for transporting the veneer across the veneer table. Machine type: stationary Feed rate: 5 - 15 m/min Feed type: stepless Stand overhang: 950 mm Working height or feed table height: 940 mm Description: The glue is applied from below; the outer side of the veneer is always visible, with automatic thickness and tolerance compensation. Approximate weight: 400 kg Kedpfezkh S Hjx Ak Aona Dimensions: 1700 x 900 x 1550 mm Motor power: 0.8 kW Storage location: Nattheim

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Knsdpfx Ajxgqmxok Aea Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Year of construction: 1997, Arm reach: 920 mm Feed rate: approx. 15 m/min. Veneer thickness: approx. 0.4 - 2 mm Compressed air connection required Storage location: Nattheim Knjdsy H Hgkjpfx Ak Aea

Condition: used, Year of construction: 1995, Stand-outreach: 630 mm, table model. Veneer thickness: 0.4 - 2.0 mm. Feed rate: approx. 7 m/min. Operating voltage: 230 V. Dimensions: 880 x 370 x 480 mm. Weight: 35 kg. Knsdpfx Akoy Hry Ne Aea Storage location: Nattheim.

Condition: used, Year of construction: 2011, Stand-off distance: 920 mm Feed rate: 15 m/min Knjdszqyx Sjpfx Ak Aoa

Condition: excellent (used), functionality: fully functional, Kuper ZV800E veneer longitudinal cutting guillotine Cutting width: 800 mm Cutting height: 55 mm Knedpfszrm Txjx Ak Asa Power supply voltage: 380 V, three-phase, 50 Hz Knife activation: two-hand control for safety Brake motor power: 2.5 kW Year of manufacture: 1998 CE marking

Condition: used, Year of construction: 2019, functionality: fully functional, KUPER FWS 1250 Veneer splicing machine for sale! Currently in production, available in January 2027. For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Feed speeds: 15 / 30 / 45 / 60 m/min Kedpfx Akjzu Auqo Asna Veneer thickness: 0.3–3.0 mm Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, empty load weight: 31 kg, For assembling veneers with thicknesses of approximately 0.4 – 2 mm. The KUPER glue thread, applied in a zigzag line by a heated thread guide, guarantees tightly sealed and robust joints. The thread side is positioned inward during pressing, eliminating the need for tedious sanding of adhesive residue. An ideal machine featuring all the advantages of KUPER zigzag gluing machines. Key features: * Durable PUR coating * Disc wheel system with tolerance compensation for various veneer thicknesses * Stainless steel worktable * Hard chrome-plated pressure roller * 8-step switch for adjusting the heating power * Start/stop foot switch Technical specifications: Throat depth: 630 mm Ksdpfjxdxh Eex Ak Asna Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4 – 2 mm Drive: 200 V electric motor Voltage: 230 V, 50 Hz Net weight: 31 kg Gross weight: 40 kg Carton dimensions: 97 x 45 x 46 cm Standard accessories: 1 test spool of original KUPER glue thread Type K 12 10 threaders 103070 1 kg separating agent 105661 1 set of tools, 1 operating manual Glue thread supply available on request! Item No. 0115034

Condition: new, functionality: fully functional, Practical – ready for immediate use without prior training. The perfect design ensures that the advantages of the KUPER adhesive thread are fully utilized. The device's practical design enables immediate use without lengthy training. After an approximately 5-minute preheating period using the temperature control unit (available for separate order), the KHL 1 is constantly ready for use. Even light pressure is sufficient to apply the adhesive thread intensively to the veneer sheet. Smooth operation due to maintenance-free operation. Advantages at a glance: - Only approximately 5 minutes heating time - Precise, straight-line bonding - Clean separation of the thread - Maintenance-free Kjdpfx Aexdxlksk Aena Item No. 0132772

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. Ksdpfx Aksxdxbfs Asna All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Knsdpsxdxk Hefx Ak Aea Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, For assembling veneers with thicknesses of approx. 0.4 - 2.0 mm. The machine operates using a special glue thread, which is applied in a zig-zag pattern over the joint. High adhesion and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is positioned inward, eliminating the need for sanding off the adhesive medium. Knsdpfxsxdxcps Ak Aja Key features: * Torsion-resistant C-frame construction made of steel * Durable PUR coating * Stainless steel worktable * Standard industrial machine heating system * Disc wheel system with tolerance compensation for varying veneer thicknesses * Adjustable heating output for stationary and running operation * Electrically controlled thread tearing roller * Fully automatic start/stop function via light sensor Technical specifications: Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 Volt, 50 Hz, 3-phase Total connected load: approx. 0.97 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offer available on request! Item No. 0152300

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Knjdpexd Sldefx Ak Aoa

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Ksdpfx Aksxdxccj Asna Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). Knodpfx Ajxdxktsk Asa SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Knjdey Tpb Repfx Ak Asa Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2009, functionality: fully functional, Veneer splitting machine FANNINGMASTER 515 for sale! Roller conveyor INCLUDED Knsdpfxoy Tngxs Ak Aea Veneer specifications Veneer strip width (cross grain) 45 - 515 mm Veneer strip length (grain direction) 400 - 4000 mm Veneer strip thickness (depending on quality of veneer) 0,3 - 1,5 mm Veneer package height 10 - 40 mm Machine capacity Throughput speed approx. 30 m/min. Machine specifications Electric energy 1,2 kW Compressed air 6 bar Power consumption Compressed air consumption 5 NL/min. Dimensions / weight Measurements Length 2360 mm Width 1570 mm Height 1750 mm Net weight, approx. 1150 kg Working table height 900 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). Knsdpot Akcfofx Ak Aea 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, We are offering this used KUPER FWJ 900 veneer assembly machine for sale; year of manufacture is unknown. Ksdpfxozpwc Es Ak Ajna Type: FWJ 900 Serial number: 2010 5717 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1997, Column reach: 630 mm Feed rate: 7 m/min Kjdpfx Akewbqi Ss Aona