Veneer splicing machines for sale
Identified location: Ashburn (US) (Edit)
|
1
Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mmveneer thickness: 0,4 - 2 mmfeed speed: approx. 5 - 40 m/[...] measurement: 73,5 dBcompressed air consumption: 0,05 l/minworking pressure: 6-8 baroverall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angularspeed, independent of t... more
|
|
1
used
Bvy7hero
manufactured by Kuper
type Junior 900
built in ca. 1985-1990
range 900 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen,
without revision
without guarantee and warranty more
|
|
2
For the production of veneer roll material
with glued finger jointing
Instead of the usual method of fleece application in the
ZI-ZU 330 COMBI GLUELINE a glue-film is being used.
A glue-line is applied over the finger-joint and is then
pressed into the porse of the veneer under high pressure
and temperature.
Bvy2ov38
The new control of the ZIZU provides a very exact dosage
over the complete width of the veneer and presice penetration
of the glue into the finger-joint, even with glues of differ... more
|
|
1
veneer splicing machine OMEZ ZAG 650
second hand machine
useful working sixe mm.650
with desk
volt. 220
Stgh8g more
|
|
6
reconditioned (used)
-Copper veneer joining machine, veneer gluing machine, stand projection 630 mm, feed 7 m/min table model incl. built-in trolley with drawer and storage compartment for the machine weight approx. 60 kg trolley PRICE IS NEGOTABLE
2rneoi more
|
|
3
used
Veneer splicing machine Brand: Kuper Type: FWJ 900 Technical data:Stand swing 900m/mFeed constant 14 m/minDrive E-Motor: 0,18 kWHeating: Ca. 200 WSpace requirement: ca. 1350x580x1600 m/m Note:The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.
Nbnhj more
|
|
3
2000
excellent (used)
from school operations
Cjb2wrmus
used, top condition, little used
Make Kuper
Type FW-Mini-630 T
Built in 2000
CE type-tested
Projection 630 mm
Thread k 12
table model
Space requirements approx. 900 mm x 400 mm x 600 mm
Storage location 97447 Gerolzhofen, unloaded, unpacked
Handover as is, inspected, function checked
without overhaul
without guarantee and warranty more
|
|
For the joining of veneers from about 0.4-2.0 mm.
The KUPER gluethread applied in a wavy line by a
heating tube guarantees a tight and strong joint.
The spliced sheets are placed face down for pres-
sing, no complicated sanding necessary.
The ideal machine for smaller veneer quantities
with the technical advantages of all the KUPER
Zig-Zag veneer splicing machines.
Specific features
* resistant PUR-paint
* disc drive system with tolerance compensation
* stainless steel working table
* chromi... more
|
|
3
Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mmVeneer thickness: 0,4 - 1,5 mmFeed speed: 8 - 18 m/[...] dimensions: 1.350 x 500 x 1.300 mm Equipped with:- Key pad of the electronic control device for the heating temperature setting- Electronic digital read-out for an accurate monitoring of the heating temperature- Handwheel of the motor speed control for the stepless adjustment of feed speed- Knob of the motor speed electronic cont... more
|
|
2
1993
excellent (used)
Very well maintained and regularly serviced machine passage width 2,850 mmVeneer thickness min. 0.4 mm / max. 2.4 mm feed max./min. 24incl. gluing stationLine composed of:- feedbelt to transport the bundles of veneer towards the edge glueing machine- glueing machine FLA- flip over and buffering belt towards the splicer (taking buffer of about 30 min of production)- splicer FQD with 2 lanes (possibility of working with single or double operator) - for furniture as well as panel industry- Clipper ... more
|
|
2
used, good condition
manufactured by Kuper
type Mini 420
desk model
required space ca. 600 mm x 300 mm x 500 mm
weight ca. 20 kg
located in 97447 Gerolzhofen, free on truck, unpacked
Bbmhtrfq
sale in current condition as seen, function checked
without revision
without guarantee and warranty more
|
|
For joining veneer strips in thicknesses of approx.
0.35 - 2.5 mm* and strip widths from approx. 60 mm.
The new concept - intelligent control processes and
the design of the KUPER crossfeed splicer ACR -
is the result of more than 80 years of experience
in the development and production of veneer splicers
and the creative implementation of innovative technologies.
Parallel cut and pre glued veneers are spliced to required
veneer size. Veneers pre glued with PVAc- or urea
based glues can be pro... more
|
|
3
Code: 0487
Brand: KUPER
Model: 630
Thread splicer for veneer with base
Technical data:
Throat depth mm 630
Thickness of veneers 0,4 - 2 mm
Feed speed 7 mt/min
Njcof
Volt 220 single-phase
Overall dimensions : mm 950 x 500 x 1180 h
Weight kg 95 more
|
|
5
used
Veneer splicing machineBrand: KuperType: FWL Passage width max. 1200 mm Joint gluing by means of glue indication thread gluing for additional stability Feed rate adjustable approx. 10 - 25 m/min. veneer thickness approx. 0,4 - 2 mm Note:The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.
Bg79jlpav2 more
|
|
3
2003
excellent (used)
Weight 2050 Kg Length 2370 mmWidth 1960 mm Height 1770 mmGluing coolingStand projection 1000 mmFeed m/min 20-50 m/minFeed infinitely variableVeneer thickness approx. 0.3 - 2.5 mmmwith cooling unit for integrated gluing
Q8opphif more
|
|
2
used
used, good condition
manufactured by Kuper
type FWJ 900
Masch.-No. 19064768
range 920 mm
thread
heating system air
underframe
Wrpjv72me
feeder 15 m/min.
required space ca. l x w x h mm
1400 x 600 x 1500
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck - more
|
|
1
For joining veneer strips in thicknesses
of approx. 0.4 - 2.5 mm and
strip widths from approx. 65 mm by
means of the proven zig-zag system.
The machine has been technically optimised
using new technology developed by Kuper.
The integrated touch panel display
guarantees faultless parameter setting and
continuous monitoring of the production data.
The machine operates with a zig-zag gluing
unit that moves back and forth,
and original KUPER glue thread.
An operator places the veneer strips
again... more
|
|
7
Opening width 1150 mm
Veneer thichness 0,3 - 3 mm
Motor 0,55 Kw
Air consumption 10 NL/min
Feed speed 10-30 m/min
Woodworking machinery Veneer fabrication
Used veneer splicing machine for sale.
M7vpu2
more
|
|
3
good (used)
KUPER veneer splicer
Type FWM 630
Stand projection 630 mm
Feed 7m / min.
Veneer thickness approx. 0.4 2.0 mm
good condition, from training workshop
I3f8v3aii more
|
|
1
New longitudinal veneer splicer
Brand: CASATI
Type: LINEA 1250
Technical details:
Arm length 1.250 mm
Veneer thickness 0,4 - 4 mm
Min. veneer length 350 mm
Hjgi8mybi
Min. veneer width 45 mm
Glue for pre-gluing: Urea and PVA
Glue for integrated gluing: Urea
Feed speed 10 - 40 m/min.
Heating area length 1.250 mm
Total connected load 7,4 kW
Power consumtion approx. 6 kw
Compressed air consumption 5 Nl/min
Compressed air pressure 6 - 8 bar
This machine permits the longitudinal splicing of veneer s... more
|
|
1
used
used, good condition
manufactured by Kuper
type FWJ 900
range 910 mm
heating system air
underframe
Mvjvx
feeder 15 m/min.
required space ca. l x w x h mm
1400 x 600 x 1500
located in 97447 Gerolzhofen
sale in current condition as seen.
Without technical test.
Without repair work.
Pickup in the short term.
- free on truck - more
|
|
For the joining of veneers from about 0.3-3.0 mm.
A special gluethread is applied in a zig-zag line by
a heating tube and serves as the glueing medium.
Tight joints, high adhesion and tear resistance
are guaranteed even on wavy veneers.
The spliced sheets are placed face down for pres-
sing, therefore no sanding of the gluing medium
is necessary. Simple operation and highest effici-
ency.
Specific Features:
* solid steel C-base construction
* chromium plated working table
* standard heating ... more
|
|
7
Veneer splicing machine Williams type FT
Projection 700 mm
Throughput speed 8 + 12 m / min.
Drive: brake motor 220/380 volts
incl. signal lamp
Gesamtgwicht: approx. 120 kg
Space requirements: approx. 1200 x 600 mm
9bxdqng
incl. Description more
|
|
11
Veneer Splicer / veneer sewing machine HAUG FZZ 95
used, functional, good condition
for tightly sewing of veneer.
glue string is applied from below, so the exterior of the veneer is always visible!
technical data:
Vso0uq
electrical connection 240 Volt, 0,8 kW
inlet depth 950 mm
material feeding stepless 5 -15 m/ min
heating time ca 4 minutes
machine dimensions 1550x750x1500 mm LWH
weight 265 kg
Used machines without guarantee.
We sell ex our stock 73433 Aalen, Germany
subject to p... more
|
|
6
Code: 0599
Berodqbg9y
Brand: KUPER
Model: FW 1200
Thread splicer for veneer
Reach mm 1200
Veneer thickness from 0,3 mm to 3 mm
Feed speed from 10 to 50 mt/min
Working height mm 925
Electrical connection 1,4 Kw
Overall dimensions: mm 2150 x 750 x 1650 h
Weight kg 425 more
|
|
3
cleaned, function checked, test run
machine complete adjusted
used, good condition
manufactured by Kuper
type FWM 630 ST
range 630 mm
thread
heating system electrical
moveable
underframe
required space ca. l x w x h mm
1100 x 600 x 1300
located in 97447 Gerolzhofen
2yx8g7
sale in current condition as seen
- free on truck - more
|
|
1
KUPER FLI 1000 – Joining precious veneers precisely.KUPER FLI 1000: Veneer gluing with efficiency for high performance.The KUPER FLI 1000, the bestseller of the wide range of KUPER veneer splicing machines combines innovation and proven technology.Innovative technology in connection with highest manufacturing standards ensures precise veneer splicing.The result of the new KUPER FLI 1000 is a proven heat supply method, simultaneous application of contact pressure and precise guidance of the valua... more
|
|
1
used, good condition
manufactured by Kuper
type FW Mini
range 410 mm
heating system electrical
desk model
required space ca. 650 mm x 350 mm x 400 mm
located in 97447 Gerolzhofen, free on truck, unpacked
sale in current condition as seen
Nh3sj more
|
|
1
For the production of veneer roll material
With the KUPER ZIZU veneers are lengthened at the
front end. Special punching dies with irregular
fingers provide the perfectly tightened finger
jointing connection.
The type R-E includes as standard equipment a separate
winding station for the production of veneer roll
material. This version works with an electronic SPS-
control with touch-panel, with frequency-controlled feed
as well as a winder motor with automatic speed adjustment.
Machine cycle:... more
|
|
6
1998
good condition (used)
For sale only together with
Nm0rj
veneer glue applicator Kuper KLM (11.000,- EUR) and
veneer Fanning machine Kuper FFM (6.000,-EUR) more
|
|
1
used
|
|
1
Double Knife Guillotine Manufactured by Monguzzi / Fisher+Ruckle, working length 4000 mm
Jcycc0kji more
|
|
6
good (used)
Manufacturer: KUPER
Type: FWO 1800
Techical data of the overall machine:
Ma. working width in grain direction: 1900 mm
Min. working width in grain direction: approx. 550 mm
Veneer strip width across the grain: from approx. 65 mm
Veneer thickness: approx. 0,4 - 2,5 mm
Working speed of transport aggretate 2 settings: approx. 40 or 75 m/min.
Infeed speed of transport belt: approx. 25 m/min
Working height taken from floor: 900 mm
Operating voltage, standard: 380 V, 3 Ph, 50 cycles
Total connectio... more
|
|
2
excellent (used)
used, top condition
cleaned, function checked, test run
new Parts:
Air heating, heating cable, ejection roll,
Viscose sponge
machine complete adjusted
manufactured by Kuper
type FWJ 900
range 920 mm
thread
heating system air
moveable
feeder 15 m/min.
Xdkwbzcz
required space ca. l x w x h mm
1400 x 600 x 1600
weight ca. 200 kg
located in 97447 Gerolzhofen
sale in current condition as seen
- free on truck - more
|
|
For the joining of veneers from about 0.4-2.0 mm.
A special gluethread is applied in a zig-zag line by
a heating tube and serves as the glueing medium.
Tight joints, high adhesion and tear resistance
are guaranteed even on wavy veneers.
Vgqur3qlr
The spliced sheets are placed face down for pres-
sing, therefore no sanding of the gluing medium
is necessary. Simple operation and highest effici-
ency.
Specific features:
* solid steel C-base construction
* resistant PUR-paint
* standard heating ... more
|
|
4
2014
good condition (used)
Min. max. thickness 0,4 ÷ 2,5 mm.
Min. max. width 45-1000 mm.
Min lenght 350 mm
Vsmlxq
Feed speed 10-30 m/min
We are not dealing outside of Europe! more
|
|
2
used
|
|
1
Giuntarice per Tranciati, costruzione KUPER, con due sistemi di giuntura a Colla e Filo;
KUPER Veneers Splicer, with two systems Glue and Nylon;
Dc2rsz8x
KUPER Jointeuse, avec deux systèmes, avec colle et fil;
KUPER Juntadora, con dos sistemas, con cola e hilo, more
|
|
6
1970
good (used)
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sponsorship of Michael van Gerwen and TV advertising
Photo gallery: The World's 10 biggest excavators
New Machineseeker.com TV commercial with Michael van Gerwen
Sell now on Machineseeker! Over 160,000 inquiries per month
10 valuable tricks for buying used machines online
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Veneer fabrication
Dealer for Veneer fabrication
