Carving machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
Fully automatic carving machine with template for flat pieces Js0fme Tracing pin with induction, very light load in order to trace plaster or wooden templates 12 spindles, each with 0,5 kW motor max height workpieces: 130 mm Spindle centers: 30 cm Max workpiece length: 110 cm Hydraulic axis movement more
9
8 double-exit spindles 8 tip-tailstock devices electric converter 50Hz- 200/300Hz (12000/18000 rpm) Bcs9qj0lvs working lenght: 300 mm min – 1500 mm max devices for raw pieces positioning set with alot of tools and copiers more
2
3uxxeyj8l Carving machine make Eisenbeiss Enns,. with this pneumatic carving machine several softwoods can a carving pattern shown in figure, will provide. You can enter the number of the carving pattern, then the carving process runs automatically. The machine is controlled by a Festo pneumatic control. Working pressure 6 bar air consumption 20 litres per work cycle, cycle time of 6 seconds. No power supply needed. Weight 650 kg. Price at pickup. Ways to sell retirement of the owner. more
6

CNC CARVING MACHINE LA SCOLPITRICE 251 RBT 20-20

Roveredo di Guà (VR), ItalyItaly dealership location
6996 km
1998
excellent (used)
CNC CARVING MACHINE - LA SCOLPITRICE 251 RBT 20-20 year of manufacturing 1998 CE standard working hours 6930 Gvjlic No. 20 tip-tailstock devices No. 20 double-exit spindles wheelbase 200 mm working lenght: 250 mm min - 1500 mm max reference device for zero point setting Robox electric cabinet with air conditioner panel control in Italian/English user manual in Italian/English voltage 380V-50Hz-3ph machine tested at our warehouse by expert technician (videos available on request) more
5

CARVING machine MARIANI PL 8 I

22066 Mariano Comense CO, ItaliaItaly
6817 km
good (used)
CARVING MACHINE Type MARIANI PL 8 Volt. 380/50 - with Inverter - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces Technical Data : n. 8 spindles distance betwen spindles mm. 400 rotation speed by Inverter . rpm min. 9600 / max. 17400 max. working length ( on rotation ) mm. 2100 3igkbruxo net weigth kgs. 2500 overall dimension mm. 5000 x 3000 H=mm.1500 more
8

Carving Machine La Scolpitrice 6 x 35

Via Udine 32B, 34071 Cormons, ITItaly
7093 km
good (used)
TECHNICAL DATA: 06 tool spindles Rotation with Inverter Bbsginfb33 Reversible motors (Lower - Upper/ Double tool spindle) Flat workbench more
3

carving machine BULLERI 100/12 CPM

Heule, BelgiumBelgium dealership location
6178 km
1982
used
Copying carving machine 1 Modell in the middle, 12 positions to copy Centerdistance of the spindles: 200 mm. Xhu8oylrk Max. workpiece length: 1m50 3 motors each 1,85 kW more
6
Code: 0317 Brand: BULLERI Model: 210/8 Carving machine (Pantograph carving machine) with 8 bits for working of flat and rotating pieces - Double bits - Centre distance between bits mm 300 - Centre distance between 4° and 8° bits mm 3100 - Powered rotation - Max working distance (lenght) mm 1400 - Frequency converter - Total Kw 11,5 - Overall dimensions: mm 3700 x 2300 x 1500 h - Weight kg 1700 H3la8fqx more
6

CNC CARVING MACHINE LA SCOLPITRICE 251 RBT 20-20

Roveredo di Guà (VR), ItalyItaly dealership location
6996 km
1998
excellent (used)
CNC CARVING MACHINE - LA SCOLPITRICE 251 RBT 20-20 year of manufacturing 1998 Bbh0ksb8pd CE standard working hours 6930 No. 20 tip-tailstock devices No. 20 double-exit spindles wheelbase 200 mm working lenght: 250 mm min - 1500 mm max reference device for zero point setting Robox electric cabinet with air conditioner panel control in Italian/English user manual in Italian/English voltage 380V-50Hz-3ph machine tested at our warehouse by expert technician (video available on request) more
5

CARVING MACHINE MARIANI PL 14

MARIANO COMENSE, ItalyItaly dealership location
6817 km
good (used)
Gcwnddv CARVING MACHINE Type MARIANI PL 14 Volt. 380/50 with Frequency Converter HF Kw 15 rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Data : n.14 spindles distance betwen spindles mm. 250 n.04 rotation speed of spindles rpm 6.000 / 9.000 /12.000 / 18.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2400 overall dimension mm. 5000 x 3200 H=mm.1500 more


carving ma...
daily

New machines via email!

Stay updated!
14

16-SPINDLE CARVING MACHINE LA SCOLPITRICE 201 16-27

Via Maceratoi 8, 37040 Roveredo di Guà (VR), ITItaly
6996 km
excellent (used)
16-SPINDLE CARVING MACHINE - LA SCOLPITRICE 201 16-27 No. 16 tip-tailstock devices No. 16 double-exit spindles No. 2 double speed electric converter wheelbase 270 mm Leabskhr working lenght: 300 mm min - 1550 mm max devices for raw pieces positioning user manual in Italian/English/French/Spanish + electric diagram set of 610 tools about more
Elect./Voltage: 110V, 60 Cy, 1 Ph. Bctbibghxn FULL HOUSE DP Door Lock Cutting Machine. Quickly and accurately prepares the edge of doors for commercial hardware, hinges and multi-point locksets. -- Overall Features: Unit can be integrated into a new door line or an existing door line. • Machines long deep pocket locks and routes for the necessary faceplate. • Easy to machine for any custom lock. • Gives door shops ability to machine specialty locks which will reduce lead times on cust... more
1

KOOKUT KK21 VERTICAL PANEL SAW SAGETECH MACHINERY KK21

Unit Chilton Industrial Estate 17, DL17 0PB Ferryhill, County Durham, GBUnited Kingdom
5734 km
2010
good (used)
Alongside our home grown brand new British manufactured Vertical Panel Saws, Sagetech Machinery are also now offering APPROVED USED MACHINES! The used vertical panel saw machines that have been traded in by our own clients who are upgrading their previous Sagetech models, giving us the opportunity to asses the value of their previous machines, make any improvements and have our own team of engineers vet them to ensure that they still have plenty of life left in them. We only sell on approved use... more
15
RENT OR BUY USED STUDER S35, S36 FAVORIT, S40CNC, S20CNC FAVORIT, S25, S33, ECO 650, S30 LEAN PRO, S145, S20-2, S40-4, S40-2 WE BUY ANY GOOD USED STUDER CNC FROM YOU. GOOD STUDER FOR SALE/WANTED... STUDER OPERATOR TRAINING, STUDER SERVICE, STUDER INSTALLATIONS, STUDER GEOMETRY CHECKS, STUDER GRINDING COURSES STUDER EXPERIENCE SINCE 1984 AFFITTASI O ACQUISTO RETTIFICATRICE IN TONDO USATE ESTERNI/INTERNI PRONTO CONSEGNA STUDER S35, S36 FAVORIT, S40CNC, S20CNC, S25, S33, ECO 650, S30 LEAN... more
1

Sundry Machine Tools SEALEY Washer

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Ibj0xeh more
4

Gear Hobbing Machine - Vertical PFAUTER P 630

Mönchengladbach, GermanyGermany dealership location
6371 km
1975
used
max. wheel diameter:630 mm gear width:425 mm max. module:10 table diameter:550 mm table hole:125 mm Br8vi8ce cutter length max.:215 mm min. number of teeth:8 workpiece length - max.:825 mm dist. milling spindle - table surface:50 - 425 Grad milling slide swivelling:240 Grad spindle turning speed range:62 - 390 U/min tangential adjustment:200 mm axial-feeds:0,4 - 6,8 mm/U radial feeds:0,1 - 1,7 mm/U cutter diameter max.:192 mm total power requirement:20 kW weight of the machine ca.:8 t dimensi... more

injection moulding machine ENGEL VICTORY 500-130 Tech

Langenfeld, GermanyGermany
6407 km
2002
ready for operation (used)
warehouse no.: 502519 manufacturer: ENGEL Typ: VICTORY 750-130 Power Controller Unit: EC100 A03 year of construction: 2003 operating hours: 67582 h description of VICTORY 750-130 Power: The hydraulic injection molding machines of the worldwide known manufacturer ENGEL from Austria have the following standard equipment: The clamping unit has three speeds (up to 5000 kN) for opening and closing and has a hydraulic ejector with shaking (up to DUEO 1700) as well as a tool safety with... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph E29h2vl BIESSE ROVER B 4.40 FT FLAT TABLE MACHINE (W/ATC/BORING) -- Specifications:4' x 12' Flat Table with "Matrix" grid phenolic surface for "Nested Base Manufacturing". -- Working cap:"X" Axis 143.3" (3,640 mm), "Y" axis 51.4" (1,306 mm), "Z" axis stroke is 8.8" (225 mm), max. material thickness 7" (180 mm). -- Positioning Speed:"X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM); helical rack and pinion drive on "X" axis & ballscre... more
1

KOOLKUT KK16 VERTICAL PANEL SAW SAGETECH MACHINERY KK16

Unit Chilton Industrial Estate 17, DL17 0PB Ferryhill, County Durham, GBUnited Kingdom
5734 km
2010
used
Alongside our home grown brand new British manufactured Vertical Panel Saws, Sagetech Machinery are also now offering APPROVED USED MACHINES! The used vertical panel saw machines that have been traded in by our own clients who are upgrading their previous Sagetech models, giving us the opportunity to asses the value of their previous machines, make any improvements and have our own team of engineers vet them to ensure that they still have plenty of life left in them. We only sell on approved us... more
7
 Start Chat

Tenoning and slot machine Panhans Typ 1736

Langenfeld, GermanyGermany
6406 km
excellent (used)
PIN slide by Panhans with clamping device for use on router tables Length approx. 1000 mm base plate Schiebeweg approx. 710mm Ex Center clamp for fixing the workpieces Stop angle-adjustable Bctek9mtrz Please the PDF file with our terms and conditions and order form. The machine can be demonstrated like by appointment with us on-site. We offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". more
1

Sundry Machine Tools RIGID 300A Pipe Screwing Machine with spare head

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Nfgmf more
5
Milling machine, vertical milling machine, tool room milling machine Clamping table 1000 x 315 mm Traverse path x/Y/Z 720/220/430 mm Quill stroke Z 115 mm Spindle retainer SK40 -Drehzahlen from 32 up to 2800 RPM Vh3ksyh0e -Vorschub from 16 mm to 800 mm / min Dimensions 1850/1200/H1900 mm Weight 2000 kg more

injection moulding machine ENGEL VICTORY 750-130 Power

Langenfeld, GermanyGermany
6407 km
2003
ready for operation (used)
warehouse no.: 502519 manufacturer: ENGEL Typ: VICTORY 750-130 Power Controller Unit: EC100 A03 year of construction: 2003 operating hours: 67582 h description of VICTORY 750-130 Power: The hydraulic injection molding machines of the worldwide known manufacturer ENGEL from Austria have the following standard equipment: The clamping unit has three speeds (up to 5000 kN) for opening and closing and has a hydraulic ejector with shaking (up to DUEO 1700) as well as a tool safety with m... more
1
Elect./Voltage: 220 V, 60 Cy, 1 Ph Gvlnfo EVANS MACHINERY 0138 ALLFORM (Semi-Auto Postformer) The Evans Machinery Model 0138 All Form is designed for the custom manufacturer doing doors, drawer fronts, desk tops, custom furniture, bar tops, service counters or any type of work that requires post [...] Features: -- Heavy Duty frame with vacuum system. -- (5) clamp pneumatic hold down system. -- Air assist operated heating bar. -- (17) air cylinders to absorb and conform to the substrate... more
5

Milling Machine - Vertical UNITECH FSS 400

Monheim, GermanyGermany dealership location
6403 km
2004
used
x-travel 1.120 mm y-travel 345 mm z-travel 400 mm Control Heidenhain TNC124 workpiece weight max. 1.500 kg surface area 400 x 1.600 mm milling-spindle dia. in forward position 100 mm tool diameter max. 315 mm max. torque 1.850 Nm turning speed range 18 steps (step 1,25) turning speed range 28 - 2.240 U/min axial adjustment sleeve 90 mm swivelling range +/- 45 ° feed stepless rapid traverse y/x/z axis 3.150 / 3.150 / 1.000 creep feed (x/y/z) 50 / 50 / 16 mm/min. weight of the machine ca. c... more
6
 Start Chat

Thread cutting machine Innengewinde bis 10 mm 700 rpm

Fröndenberg/Ruhr, GermanyGermany
6437 km
2015
as good as new (ex-display)
Thread cutting machine Type 700 Hkbgjp3hs New compressed air motor spindle New compressed air maintenance unit New safety clutches M2, M3, M4, M5/M6, M8, M10 Pneumatic / pneumatic tool oil 1 L Hose, couplings Free shipping! Item location: 58730 Fröndenberg/Ruhr The machine can be visited like compressed air and tried out. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The information, technical data, dimensio... more
1

Turret Millers KRV 3000 Turret Miller. With Accurite Digital Readuot and Machine Vice

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bcspsv9xie more
5
Machine vise, stable Vice, drilling vise Jaw width 135 mm Jaw height 35 mm C2unomf2s Max clamping depth 130 mm Dimensions 400/190/H105 mm Weight 25 kg more

injection moulding machine ENGEL VICTORY 500-130 Tech EC100 A03

Langenfeld (Rheinland), GermanyGermany
6407 km
2002
ready for operation (used)
warehouse no.: 502529 manufacturer: ENGEL Typ: VICTORY 500-130 Tech Controller Unit: EC100 A03 year of construction: 2002 operating hours: 49774 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1300 kN size of mould plates h: 750 mm size of mould plates v: 520 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 130 mm ejector force:... more
1
Elect./Voltage: 220 V, 60 Cy, 1 Ph Dd8kz9p NORFIELD MAGNUM Pre-Hung Door and Jamb [...] capacity.: 18" - 48" Wide x up to 96" tall, thickness from 1-1/8" to 1-3/4"; lock back set 2-3/8" - 5" and jambs from 3-1/2" to 10-1/2" wide x 8' high, 1/2" to 1-1/4" thickness; butts 3-1/2" - 5"; 1/4" - 5/8" radius; infinite spacing. -- Equipped with: (2) Powered feed wheels automatically carry the door over the 5 HP edge beveler, (2) flap sanding heads ease the corners. -- Additionally equipped with: ... more
1

Notching Machine DURMA FN 2004

Witten, GermanyGermany dealership location
6419 km
2008
used
plate thickness:4 mm pressure:- t total power requirement:4 kW blade length:200x200 mm work stroke:30 mm Bbdk0a0wfr more
8
 Start Chat

Circular sawing machines Martin T 75

More Martin T 75
Fröndenberg/Ruhr, GermanyGermany
6437 km
good (used)
Pre-owned saws internal engine number: m2615 manufacturer Martin type T 75 Ma. Number 363 built about 1980 carriage length 2.70 m length 2, 80 m width 1 m swivel up to 45 ° cutting height of 147 mm saw blade of 450 mm adjustment blade 75 mm weight 1.000 kg with scoring unit Artikelsta ndort: 58730 Fröndenberg/Ruhr Nfip9 The machine can be visited like to see power and tried out. We will gladly send you more photos by E-Mail. A forklift/crane for loading is available. We reserve the ... more
1

Sundry Power Plant BANDALL Wrapping Machine

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Bcspuyx8ul more
5
Pneumatic grinding machine, pneumatic file, belt sander Power consumption 6 bar Speed 0-3000 rpm Recording ø 19 x 100 mm weight 6 kg Dut2le more
ENGEL VICTORY 500H-200L-110 Combi warehouse no.: 502590 manufacturer: ENGEL Typ: VICTORY 500H-200L-110 Combi Controller Unit: EC 100 year of construction: 2002 Injection unit: 200 L, D = 30 mm, 99 ccm, 1450 bar technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1100 kN size of mould plates h: 740 mm size of mould plates v: 680 mm min. mould height: 500 mm max. open daylight: 1... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Bbu92ddgfp BIESSE ROVER A FT 1536 FLAT TABLE MACHINE (W/ATC/BORING,"C" AXIS): -- Specifications:5' x 12' "Matrix" grid phenolic surface for "Nested Base Manufacturing" -- Working capacity:"X" Axis 148.2" (3,765 mm), "Y" axis 61.4" (1,560 mm), "Z" axis stroke is 12.7" (324 mm), max. material thickness 6.7" (170 mm). -- Positioning Speed:"X" Axis 279 FPM (85 MPM), "Y" axis 197 FPM (60 MPM), "Z" axis 65.6 FPM (20 MPM);"X" & "Y" Axes use a precision ... more
3

Lateral Milling Machine JOBS JOMACH 159

Mönchengladbach, GermanyGermany dealership location
6371 km
2005
used
x-travel:18000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min M27qp spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° feeds:1 - 16000 mm/min rapid traverse::16 m/min weight of the machine ca.:72 t total power requirement:65 kW dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
9
Technical description: -Hobelcapacitaet NET 230 x 130 mm -Spindle arrangement: (1) bottom (horizontal) 7,5 kW/10 PS (2) right (vertical) 5.5 kW/7.5 HP (3) left (vertical) 5.5 kW/7.5 HP (4) right (vertical) 7,5 kW/10 PS (5) top (horizontal) 11 kW/15 HP (6) below (horizontal 11 kW/15 HP) (7) uni 5.5 kW/7.5 HP -Planing spindle ø 40 mm -Incl. 4 Planer heads quick-change system, Ø 125 mm, 1 x 240 mm Z = 4, 1 x 230 mm Z = 2 and 2 x 130 mm Z = 4 -Feed adjustable, 6-36 m / min, m... more
1

Sundry Machine Tools Hand Polisher

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Ss37qg more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Performance 3.7 kW 2890 rpm at 50 Hz Power 5,5 kW 5890 RPM @ 100 Hz Voltage 380 Volt Jiaei0z Recording shaft Ø 35 mm Price per piece -2 x available Dimensions 630/250/H150 mm Weight 47 kg more
10
Using size max: 135 x 70 cm Gvn8w0 min. 70 x 15 cm hole -milling width bag hole (92) width 10 U-milling (180 °) width 8 V-milling (120 °) width 8 more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Bbxdaer9c0 BIESSE ROVER A FT 1536 FLAT TABLE MACHINE (W/LOADING, UNLOADING + "C" AXIS): -- Specifications:5' x 12' "Matrix" grid phenolic surface for "Nested Base Manufacturing", Front loading flow from Left to Right configurationAutomatic Loading and Unloading System (Sweeping Arm + Loading Vacuum cups) . -- Working capacity:"X" Axis 148.2" (3,765 mm), "Y" axis 61.4" (1,560 mm), "Z" axis stroke is 12.7" (324 mm), max. material thickness 6.7" (170 m... more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m Uwwj7xe3s HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
6
internal diameter ca. 550 mm Bbpqj8rpyp grinding depth 500 mm swing diameter 800 mm stroke of the table 800 mm total power requirement 20 kW weight of the machine ca. 7 t dimensions of the machine ca. 4 x 3 x 2 m more

Gear Testing Machine KLINGELNBERG ZP 260

Langenfeld, GermanyGermany dealership location
6403 km
2000
used
max. wheel diameter 260 mm gear width 400 mm max. module 15 min. module 0.5 total power requirement 1,7 kW weight of the machine ca. 1.2 t Moqql dimensions of the machine ca. 2 X 3 x 3 m more
5
Strapping machine, packing machine, strapping machine -500 x 500 mm-5 mm strapping through goose hole Core diameter 60 mm Coil width 120 mm -A pedal pressure triggers the automatic strapping Qkxyqgzjc more
14
Using size max: 135 x 70 cm min. 70 x 15 cm hole -milling width Bctett8www bag hole (92) width 10 U-milling (180 °) width 8 V-milling (120 °) width 8 more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Bccafufqgo BIESSE ROVER 30 S2 FT FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications: 5' x 11' "MATRIX" grid phenolic table for "Nested Base Manufacturing"Working cap. "X" Axis is 135.11" (3,432 mm), "Y" axis is 61" (1,550 mm), "Z" axis stroke is 11" (275 mm), max. material thickness is 8.9" (200 mm) -- Positioning Speed:"X & Y" Axis is 230 FPM (70 MPM) & "Z" axis is 98 FPM (30 MPM). -- Work Table:Flat table designed for "Nested Base Manufacturin... more
6

Gear Hobbing Machine - Vertical PFAUTER P 1501

Monheim, GermanyGermany dealership location
6405 km
1978
used
max. wheel diameter 1500 mm gear width 600 mm max. module 16 min. module min. number of teeth 9 clamping table diameter 1200 mm table bore diameter 300 mm diameter of hob 255 x 280 mm shifting 250 mm milling spindle speeds (infinitely variable) 30 - 180 U/min wheel diameter with counterstay 900 mm wheel diameter - without counterstay 1500 mm main drive motor 15 kW milling slide swivelling 240 ° center distance betw. workpiece-tool min/max. 60 - 870 mm feeds - axial 0,50 - 6,00 mm/WU feeds - ... more
5
-To glue er thickness 0.2 mm to 15 mm -Quick heating pool -Glue roller right / left rotation -automatic reel magazine up to 3 mm -Strip magazine -Flush - or fine / phase - trimming unit Nfhwl -Total power 7 kW -Chassis more


carving ma...
daily

New machines via email!

Stay updated!

to

to

Edit search
CARVING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close