Used Hwacheon for sale (32)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 385 mm, turning diameter: 350 mm, overall weight: 4,200 kg, controller model: Fanuc Series 01-TB, The machine's hydraulics have been renewed! TECHNICAL DETAILS Max. turning diameter: 350 mm Max. turning length: 385 mm Turret tool changer: 12-position EWS MACHINE DETAILS Control system: Fanuc Series 01-TB Dimensions & Weight Dedpoyf Afljfx Afnskh Dimensions (L x W x H): 2,700 x 1,800 x 1,700 mm Machine weight: 4,200 kg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Dkodpfxsyf E Sze Afnjh Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 7,774 h, functionality: fully functional, turning length: 452 mm, turning diameter: 300 mm, spindle speed (max.): 4,500 rpm, swing diameter over bed slide: 700 mm, TECHNICAL DETAILS Turning diameter: 230/300 mm Turning length: 452 mm Maximum swing over bed: 700 mm Spindle bore: 65 mm Spindle speed: 4,500 rpm Spindle motor: 15/11 kW Max. spindle torque: 179 Nm Number of tools in turret: 12 BMT 55 Live stations: 12 BMT 55 Live tool speed: 5,000 rpm Milling spindle drive: 5.6/3.7 kW Y-axis: ±60 mm Sub-spindle power: 7.4/4.9 kW Dksdpfx Afsyfnc Nsneh Sub-spindle speed: 6,000 rpm Rapid traverse: 36/36/10 m/min MACHINE DETAILS Control: Fanuc Dimensions (L x W x H): 3.9 x 1.65 x 2.0 m Machine weight: approx. 4,700 kg Main spindle chuck diameter: 210 mm Sub-spindle chuck diameter: 125 mm EQUIPMENT Automatic tool measurement Q-Setter Chip conveyor Parts catcher with box 2 live tools BMT 55 Set of standard tools CNC turning center with live tooling, Y-axis, and sub-spindle.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: M281364F3ND, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D inkl. Shopmill, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 24 pcs Tool holder: BT 40 MACHINE DETAILS Dsdpoygxkmsfx Afnokh Control: Siemens 828D incl. Shopmill Machine weight: approx. 6.5 t EQUIPMENT Hinged belt chip conveyor Internal coolant supply up to 30 bar

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck Dkjdpfjx Hwf Rsx Afnjh

Year of construction: 2006, condition: good (used), CNC control Sinumerik 810D 12-fold revolver bar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm) chip conveyor tail stock Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 550 mm max. Drehdurchmesser / max. turning diameter 300 mm max. Drehlänge / max. turning lenght 300 mm X-Weg / X-travel 170 mm Z-Weg / Z-travel 335 mm max. Stangendurchlass / max. bar diameter 45 mm Djdpfelfdazjx Afnjkh Drehzahl / spindle speed 6000 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Eilgang X / rapid feed X 36 m/min Eilgang Z / rapid feed Z 36 m/min. Antriebsleistung / drive capacity 20 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2008, HWACHEON HI- TECH 200B CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B YEAR 2008 CONTROL FANUC O i-TB SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS RENISHAW PROBE PARTS CATCHER TAILSTOCK SWARF CONVEYOR MACHINE MANUALS MACHINE IN GOOD WORKING ORDER Dkjdst Urwhspfx Afnoh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Including 4th axe TSUDAKOMA . Cooling threw spindle 30 bar. Control Fanuc 0i-MD. Including probes. Axes ( X/ Y/ Z ) mm 1.000 / 550 / 500 Table 1.100 x 502 mm Dkedpfx Afeycg Npsnjh Table loading kg 700 Spindle revolutions 12.000 rpm Spindle BT40 Number of tools 24 Machine dimensions mm 3.335 x 2.200 x 2.670 Weight kg 6.500 control - Fanuc 0i-MD

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm turning speeds: 3500 1/min turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, Dedpfjt Acy Aox Afnskh 1 pcs. live tool included approx. 15.500 working hours *

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: i-Series, total height: 2,700 mm, total length: 3,000 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 1,000 mm, table length: 500 mm, table load: 700 kg, overall weight: 5,040 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 346 h, spindle motor power: 18,500 W, spindle nose: BBT40 - BT40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The HWACHEON VESTA-1000+ guarantees high precision and dynamics thanks to its robust cast iron bed and linear guides. With its powerful 12,000 rpm spindle and optimized software, it is ideal for versatile applications. The machine is in excellent, exceptionally clean condition and has 346 spindle hours (see photos). This HWACHEON VESTA-1000+ is equipped with: - Linear guides Dkodpfjx Rpp Ajx Afnsh - 12,000 rpm spindle (BT40 - BBT40) - Through-spindle cooling - Spindle cooler/chiller - Chip conveyor - Electronic handwheel - External cooling via nozzles - Tool magazine full of tooling (including 3D probe) and cutting tools - Cuter machine vise - Set of heavy-duty clamping claws The machine can be demonstrated under power by appointment!

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Dkedpfx Aox Tti Ssfneh Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2001, LATHE HWACHEON MODEL HI – ECO 10 Djdpjyftt Tofx Afnokh CNC FANUC SELF-CENTERING CHUCK DIAMETER: 210 mm BAR CAPACITY: 52 mm TOOL MAGAZINE: 10 POSITIONS MAX. TURNING DIAMETER: 250 mm MAX. TURNING LENGTH: 400 mm SPINDLE SPEED: 30 – 4,500 RPM COMPLETE WITH ALL DOCUMENTATION WEIGHT: 3,500 kg ACCESSORIES: CHIP CONVEYOR BELLEGRANDI COLLET HOLDER

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Dksdpfsyc Nryox Afnjh Tool package (including driven tool holders) Chip conveyor Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min spindle bore 75 mm bar diameter 51 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door Dksdpfx Ajttckmefnsh - chip conveyor

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Dkjdpfew Tcvmex Afneh Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 2,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 230 mm, spindle motor power: 18,500 W, total height: 2,046 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 0i-TF Plus, product length (max.): 3,000 mm, number of axes: 2, General Data Machine weight 9500 kg Measurements height 2046 mm Dkjdox I S Najpfx Afnjh Control Unit Brand FANUC Model 0i-TF Plus Main Drive Number of axis 2 Spindle Speed 2000 RPM Spindle motor power 18.5 kW Dimensions Machine Length 3000 mm Movement X-Axis Movement 215 mm Z-Axis Movement 230 mm This HWACHEON TTC-10 horizontal turning machine was manufactured in 2015. It features a swing over bed of Ø 500 mm, a maximum machining diameter of Ø 400 mm, and a maximum machining length of 203 mm. Equipped with a Fanuc Oi-TF Plus control, it offers rapid traverse rates of 30 m/min in both X and Z axes. Consider the opportunity to buy this HWACHEON TTC-10 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Djdex D Rkfopfx Afnokh Main Drive Number of axis 2 Turret Number of turrets 1 This HWACHEON Cutex 240 was manufactured in 2006. A robust horizontal turning machine featuring a Siemens control system and a 12-position tool turret. It supports a turning diameter of 350mm and a length of 700mm. If you are looking to get high quality turning capabilities consider the HWACHEON Cutex 240 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, x-travel 1050 mm y-travel 600 mm z-travel 600 mm control Fanuc Dedpfovnh Umox Afnjkh weight of the machine ca. 7200 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Technical Data VESTA-1000/12K Travels Axis travels (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guideways: Linear rolling LM guides Table Working surface mm: 1,100 x 502 Maximum load kg: 700 Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm) Spindle Maximum speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations pcs: 24 Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Tool-to-tool change time sec: 2.5 Chip-to-chip change time sec: 4.3 Magazine & changer type: Disc magazine with rotary arm Power Supply Connected load kVA: 30 Tank Capacities For spindle lubrication/cooling l: 6 / 20 For coolant l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 Control System Fanuc 0i-MD Standard Equipment - Spindle air purge Dkedpfx Aox Rzhdofneh - Machine alignment elements - Machine protective guarding - Auger conveyor in working area - Cooling system - Safety doors - Ethernet interface - CNC system software options by HWACHEON: - OPTIMA (feedrate optimization) - HAI (40-block memory, AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC]) - HECC (accuracy or speed preference in machining) - Centralized lubrication system - Lubricant oil evacuation to dedicated tank - Electronic handwheel - Operating documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color status signal light - Spindle jacket cooling - Air dryer (included) - Work area lighting - 10.4" color LCD display - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i - Chip conveyor - Workpiece and tool probes - 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2200 mm Measurements depth 3000 mm Measurements height 3300 mm Dedpfox D H A Rox Afnjkh Machine weight 13000 kg Main Drive Spindle bore 100 mm Number of axis 2 Movement X-Axis Movement 350 mm Z-Axis Movement 790 mm Tools Max tool diameter 50 mm This HWACHEON VT550R was manufactured in 2008. It features a hydraulic chuck diameter of 500 mm, a maximum turning diameter of 650 mm, and a spindle speed up to 1,500 RPM. The machine includes a 12-position turret and a chip conveyor, ensuring efficient operation. Consider the opportunity to buy this HWACHEON VT550R turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2008, HWACHEON HI-TECH 300 LATHE CNC FANUC 18i – TB MANUAL GUIDE i STEADY REST BRAND MORARI MOD. SLZ – 1517 WORKABLE BAR DIAMETER IN STEADY REST MIN. 15 mm – MAX. 170 mm SWING OVER BED: 600 mm MAX. TURNING DIAMETER: 380 mm SPINDLE MOUNT: ASA 8 “ Djdpfoxq Rrpox Afnjkh CHUCK DIAMETER: 315 mm MAX. TURNING LENGTH: 1,200 mm TRAVELS: X: 280 mm Z: 1,270 mm SPINDLE SPEED: 3,200 RPM BAR CAPACITY: 79 mm TURRET: 12 POSITIONS YEAR: 2008 CHIP CONVEYOR COMPLETE DOCUMENTATION

Condition: used, Year of construction: 2018, functionality: fully functional, Hwacheon T2-2T YSMC dual turret and dual spindle CNC lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance machine for complex and simultaneous operations, ideal for high-precision series production. Main technical specifications: Max. swing diameter over bed: Ø 880 mm Max. turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 stations each, driven Driven tools: 6,000 rpm, power 5.5 / 7.5 kW Tool size: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverse: X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Dkjdpswt S N Dsfx Afnsh Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts unloader Chip conveyor Coolant tank with pumps and two high-pressure pumps Various fixed and driven tool holders Tool presetting arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning.

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h Dodpfx Asxvdtwofnekh - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, turning length: 1,337 mm, turning diameter: 420 mm, General Control: Siemens 828 D Turning diameter: 420 mm Turning length: 1,337 mm Swing diameter: 700 mm Bar capacity: 89 mm Rapid traverse speed: 20 / 10 / 24 m/min Dedpfx Aex Ag Hmsfnekh Main spindle Bar capacity: 89 mm Chuck size: 305 mm Speed: 2,500 rpm Spindle power: 22 kW Spindle torque: 1,050 Nm Sub spindle Speed: 4,000 rpm Spindle power: 12 kW Spindle torque: 122 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 9.4 kW Torque: 90 Nm Tool holder: BMT-65 / BH Travel X: 280 mm Travel Y: 120 mm Travel Z: 1,390 mm Equipment Chip disposal: chip conveyor Coolant capacity: 240 liters Tool measurement: measuring arm in the working area Part discharge: parts catcher Bar feeder: prepared

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning diameter: 400 mm, General Control: Fanuc 0i-TF PLUS Turning diameter: 400 mm Turning length: 560 mm Swing diameter: 690 mm Dkodpfxjx Ag E Ns Afnjh Chuck diameter: 254 mm Main spindle Speed: 3,500 rpm Spindle power: 18.5 kW Torque: 410 Nm Bar capacity: 81 mm Sub-spindle Speed: 5,000 rpm Spindle power: 7.5 kW Torque: 86 Nm Turret Technology: Turret with 12/24 stations (double indexing) Tool drive: 5,000 rpm Travel X: 240 mm Travel Y: 120 mm Travel Z: 700 mm Equipment Chip disposal: Chip conveyor Tool measurement: Probe arm in the working area Part removal: Parts catcher Automation: Prepared