Used Homag Espana for sale (487)

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Njdpfez E A T Eox Amtodc Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Ndedpfxjz Nfb Is Amtjc Maximum panel thickness: 40 mm Operating Units: 3 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Nedpfey In Dgjx Amtodc Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Nodpfxjy In A Ne Amtedc Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Nedpfx Aey In A Aemtodc Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0-201-24-0260, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance Z-axis: 600 mm, workpiece length (max.): 3,470 mm, workpiece width (max.): 1,550 mm, number of slots in tool magazine: 18, controller manufacturer: HOMATIC, controller model: PC85, spindle motor power: 15,000 W, Equipment: CE marking, documentation/manual, Machine with shuttle console tables Workpiece length X max. (all units) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece length max. (milling cutter D=25 mm) - max. 3470 mm with single workpiece placement - max. 1700 mm with alternating workpiece placement Workpiece width Y max. (all units) - max. 1300 mm Workpiece width Y max. (milling cutter D=25 mm) - max. 1550 mm 2 individually movable console clamping tables - 4-position workpiece placement possible - 8 movable consoles (4 per table) each with 1 front stop - Console length 1490 mm - 4 lifting rails - Side stops 4 x left, 4 x right (mirror image) - 1 vacuum circuit per table - 2 vacuum pumps, 140 m3/h each - Chip conveyor belt Equipment / Units: - Milling spindle 15 kW, liquid cooling - Tool changer, 18-position carousel - C-axis with electrical interface - C-axis extension for FLEX-5 unit - Drilling unit 2.7 kW, 20 spindles vertical / 10 spindles horizontal - Swiveling sawing/drilling unit - Sawing unit D=1200 - FLEX5 sawing, milling, drilling unit for multi-tool - 16 pcs. suction cups 160x115 mm - 8 pcs. suction cups 125x75 mm Control / Software: - PC85 control system - WoodWop 5.1 Ndedpfx Ao Afabajmtjc - Wood Design Package - CAD plugin - DXF import - Schuler MDE Available from week 46/2026.

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Nsdpfxoy In Avj Amtodc

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Ndsdpfxoy In Ape Amtsc Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 0-240-75-5616, functionality: fully functional, Equipment: CE marking, documentation/manual, SAWTEQ B-300 panel saw Cutting length: 3800 mm Cutting width: 3800 mm Nodsz Tt Eiopfx Amtsdc In very good condition, selling due to replacement with a different model.

Condition: used, Year of construction: 2019, functionality: fully functional, 6 heads, good, working condition, FREUD tool set Nedpoz Tymmefx Amtedc

Condition: used, Year of construction: 2012, HOMAG BMG 311 Venture 316 XXL, manufactured in 2012. 5-axis CNC machining center with a cantilever table for large wood and wood-based material parts. Equipment: - Workpiece length in a single field up to 6,000 mm with all aggregates - Workpiece width up to 950 mm at the front / 1,400 mm at the rear with all aggregates - Z-axis travel 450 mm - Drive5C main spindle, 10 kW S6, HSK-F63, 1,000–24,000 rpm - 14-position tool changer - Drilling head: 12 vertical and 4 horizontal spindles, as well as a nut saw - 10 consoles, each with a length of 1,340 mm - 2 vacuum pumps with 90 m³/h each at 50 Hz - LED position indicator and chip conveyor - powerControl / woodWOP 6.1 Photographed meter readings (December 2025): Main usage: 4,001.96 h Secondary usage: 1,864.35 h Total usage: 8,788.53 h No guarantee regarding the current operating hours. Photos of the woodWOP version and hour meters are attached. Planned dismantling and handover after the arrival of the new machine in week 05/2027; exact dismantling and collection date to be agreed upon. Work areas depend on the tools and clamping devices. Njdpfxe Afclze Amtedc Price on request, free on board (FOB) truck. Detailed scope of delivery, inspection and transport by arrangement. Subject to errors and prior sale. DS-Maschinen – Owner David Schulz Machine location: Bavaria, Germany. Inspection by appointment only through DS-Maschinen.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. Ndsdpjzp Ih Ejfx Amtjc It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: excellent (used), Year of construction: 2020, Edgebanding machine HOMAG EDGETEQ S-380 / KDF 650 C, year of manufacture 2020. Nedpfj Adubrox Amtsdc Single-sided edgebanding machine. Type OPTIMAT KDF 650 C. Screen-based operation. Matching XES 200 service station available separately; not included in the offer. Year of manufacture 2020 according to the nameplate. Collection from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport after consultation. Price upon request. Contact: DS-Maschinen – Owner David Schulz.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000 Njdpfxjz E Rino Amtedc

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Ndjdpo Adub Esfx Amtoc Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ Ndedjz Rrbwspfx Amtsc max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Year of construction: 2012, condition: used, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Ndedpfx Aj Aba Rtemtsc

Condition: used, Year of construction: 2020, Spray coating machine Nsdpj Adr Hxefx Amtedc Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Ndjdezq Hwhjpfx Amtec Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edger, after a complete overhaul, will be available at the end of October. TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Prepared for connection to a return system ■ Variable feed rate: 8-18 m/min Nsdpfsz A Tf Tjx Amtedc ■ Automatically adjustable alignment guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA preheating unit, 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional profile sanding unit with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat sanding, upper and lower polishing unit Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operating condition: Ready for operation ■ Machine length: 6075 mm ■ Year: 2018 ■ Number of processed meters: 2.5 million/m

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can Nedpfx Amoz Df Txstodc be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) Nodpfx Amjzz N Uqetodc - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min Nsdpfx Amsz E S E Retodc - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Ndodpjzv S Snsfx Amtec Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Ndsdpfxszy I Tce Amtjc