Used Homag for sale (477)

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Crsdpfsz E A T Ejx Acpeh Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Codsz A Tx Topfx Acporh Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg Cedpfx Acez Eazyjporh EQUIPMENT Nordson unit, year of manufacture 2017 CE marking

Condition: good (used), Year of construction: 2012, functionality: fully functional, operating hours: 3,800 h, Well-maintained edge banding machine Homag KAL 210 Ambition 2264 from a carpentry workshop (not used in industrial production). Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2012 Operating hours: approx. 3,800 h Units: - Release agent spraying unit, top/bottom - Joining milling unit (2 x 3 kW) - Gluing unit A20 (with 2 rollers) - Trimming unit HL84 (2 x 0.8 kW, bevel/straight) - Pre-milling unit BF10 (2 x 1.5 kW) - Profiling milling unit FK11 - Profiling trimming blade PN10 - Finishing unit (glue seam trimming blade & buffing unit) Control system: - power Control PC22 Crsdpjz I Efcsfx Acpoh Technical data: - Feed rate: 18-25 m/min. - Workpiece thickness: 12 - 60 mm - Edge thickness: Strips: 0.4 - 20 mm, Roll: 0.3 - 3 mm - Length: 7,845 mm #CS1

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Cedpfx Asz En Axecperh Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours Crjdpfx Ajzyck Ascpoh • Number of processed workpieces: approx. 103,500 • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit • Touchscreen control • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Cjdpfxsy In Dgo Acpjrh Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, spare drive components, and an Extract DUO two-bag dust extraction system. The machine has low operating hours and has been serviced annually by an authorized dealer. The machine can be inspected while in operation. The sale price includes professional disassembly and loading onto a truck for transportation. The buyer is responsible for arranging and covering the costs of transportation. Cedpfx Acez E Rinjperh Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part and an additional 8 on the fixed part Technical specifications of the included dust extraction system: Fan power kW: 5.5 Filter surface area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Airflow rate m3/h: 6000

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps. Cedpfx Aoz H Rp Djcperh

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Cjdpfxjz Ekb Ds Acperh Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, number of slots in tool magazine: 23, total length: 10,000 mm, total width: 4,100 mm, Equipment: CE marking, documentation/manual, HOMAG BMG 311 Venture 316 XXL – 5-Axis CNC Machining Centre Codpfx Aezp Ih Ejcpjrh Lightly used and maintained in excellent condition, this HOMAG BMG 311 Venture 316 XXL is almost like new. The machine is equipped with a powerful 5-axis machining unit, 23-position tool changer, multiple vertical and horizontal drilling heads, grooving saw blade, and extensive routing and drilling capabilities. It is suitable for complex furniture, cabinet, door, panel, and solid-wood machining applications. Thanks to its versatile configuration, the machine can perform routing, drilling, sawing, grooving, and angled machining operations in a single setup. A highly capable and well-equipped CNC machining centre with very low operating hours, ready for immediate production.

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Csdpfx Aez Ekfvecpjrh Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area Credpfx Acsz E S E Rspeh - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood Credpfx Aoy In A Nocpjh Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm Crodpfx Acoz Df Txspjh workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Technical specifications: Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills Crsdjz Incdspfx Acpoh X, Y, and Z axes – NC controlled and computer-adjustable Barcode scanner Uses dowels with a diameter of 8 mm Machine is in good condition The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Condition: excellent (used), Year of construction: 2021, Corpus press, louvered corpus press Homag Cabteq S-200, Ligmatech Profi MPH 410/25/07 A video of the machine in operation can be sent upon request. A flexible scissor press with two adjustable pressure plates. Crjdpoz Ihw Iefx Acpjh Easy operation thanks to the comfort package. Travel speed of 50mm/s in rapid mode and 25mm/s in slow mode during corpus pressing. Pressing force of the vertical and horizontal press plates adjustable between 12 and 18 kN. Adjustment of the pressing time (timer). Maximum pressing area approximately 2500 x 1400 x 700mm. Minimum pressing area approximately 250 x 150 x 250mm. Working height approximately 300mm. Operating manual. CE marking. Original paint. Very good condition, see original photos. Machine dimensions approximately 4000 x 750 x 2350mm (L x W x H). Weight approximately 2200kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Csdpey In A Aefx Acperh Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Codpfey In Apsx Acporh Thin sheet loading: yes

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm Cjdpfx Acoz Ikq Doperh - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Crsdpoz Hb Hmofx Acpeh Location: Customer.

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Crjdpfxey In Avs Acpoh No of Grippers: 9 Thin sheet loading: yes

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine Crsdpfxezv S Sno Acpjh For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Cedpszy I Tcjfx Acporh

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Cjdpfx Acjz Ekbkspjrh Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042