Used Homag for sale (475)

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Dujdoygtcqspfx Abhop Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007134, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Dusdst Hmtzopfx Abhsp Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 006574, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt Djdpevxxuxsfx Abhoup Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dedpfxowuuc Aj Abhsup

Condition: used, Year of construction: 2005, Single-sided edge bander designed for precise and stable edging of solid wood and panel components (chipboard, MDF, laminate). The machine is conceived as a compact yet fully equipped solution for small- and medium-batch production, with an emphasis on edge processing quality. A robust cast iron frame ensures high rigidity and long-term geometric stability of the machine. It features a classic continuous conveyor with a pressure belt and a complete set of machining units for finishing the edge in a single pass. Technical configuration of the machine: - Pre-milling unit - Material pre-heating Dodjyfw Syepfx Abheup - Automatic EVA glue application - EVA glue roller - Front and rear end trimming saws - Rough trimming unit - Corner rounding unit - Radius scraper - Glue scraper - Grooving unit - Brushing unit - Return conveyor

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Dodpfxsx A Hbko Abhsup Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 0-240-75-0703, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, NEW PRICE ONLY €81,000! Price valid until March 21, 2026! Don’t miss this opportunity! We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw, extended version for automatic storage integration. The SAWTEQ B-400 is a HOMAG panel saw with automatic loading, delivering high-speed processing. This efficient model is ideal for high-volume panel machining, providing precise, high-quality finish cuts. Renowned for its reliability, accuracy, superior performance, and rapid operation, it is a top choice for professionals. Dujdpfsyn Rzmjx Abhjp The offered saw is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our site by the manufacturer. The only use was commissioning by the HOMAG POLSKA Sp. z o.o. service team; it has not been operated thereafter. HOMAG is a world leader in advanced machinery production, and this model requires no introduction within the industry. Our version is exceptionally well specified, featuring practically every option available. A comparable standard machine costs €100,000–110,000 net (PLN 425,000–467,500 net), while the extended model with automatic storage compatibility and additional features costs about €190,000 net (PLN 807,500 net). Advantages: - High productivity due to automatic loading and large saw blade projection - Maximum efficiency with minimal footprint - Optimized for streamlined material flow and exact logistics - Ready for integration in networked manufacturing environments We maintain direct contact and support from HOMAG, ensuring expert installation and commissioning at the buyer’s site if required. With a discount exceeding 45% from the new price, this saw is an excellent deal for anyone seeking a state-of-the-art, automatic storage-compatible panel saw, or those considering such a system in the future—potentially saving €90,000 net (approx. PLN 400,000 net). The saw can also be operated independently, without automatic storage connection. General Terms of Offer: - Device is BRAND NEW, manufactured in 2020; sold with no warranty or guarantee. - Returns are not accepted. - Quoted price is exclusive of VAT (23% for Polish buyers), added on invoice—verify the price presentation in the offer. - Single private owner. * Price in EUR calculated at NBP rate – €1 = PLN 4.25. Dcsblvjw Exk Ejawnvob Welcome to all MachineSeeker users! We are new to MACHINESEEKER. We are not a furniture manufacturer or machinery dealer. We are a real estate developer with numerous properties in Poland, building homes and apartments in Warsaw (the capital). The machines listed are our direct property, acquired as settlements from tenants in the furniture sector. We know their full history and can confirm their excellent condition. We remain in contact with manufacturers for support—Homag, Otto Martin, OMC Machinery, and FANUM—ensuring assistance if needed. As these machines are surplus to our needs, our pricing is highly attractive, particularly since the equipment is virtually new. We can assist with transport within Poland or the EU. You are welcome to inspect the machines before purchase. Kind regards.

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! Dusdsyic Tujpfx Abhsp 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, functionality: unexamined, machine/vehicle number: 2-055-06-1680, Ferwood Code: RU0010260 - Manufacturer Code: 2-055-06-1680 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Dsdpjv Izyvofx Abhjup

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, power 11 kW, HSK 63F interface Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions Dsdpfxjyprr No Abhjup 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Maximum machinable width: 250 mm Dodpfx Aboykivhohjup Max. forward feed speed: 24 m/min Operator shafts number: 5

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-201-21-4348, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, controller manufacturer: HOMATIC, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, controller model: PC85, spindle motor power: 7,500 W, Equipment: documentation/manual, HOMAG BAZ 722/58/K Gantry 4-Axis CNC Machine with 2 Shuttle Tables and Gluing Unit Year of manufacture: 2004 NOTE: The main spindle and the machine’s control computer were replaced approx. 2.5 years ago. Workpiece length X max. (with gluing unit) - max. 5660 mm with single loading - max. 2680 mm with pendulum (shuttle) operation Workpiece length max. (milling cutter D=25mm) - max. 5860 mm with single loading - max. 2870 mm with pendulum operation Workpiece width Y max.: - max. 1300 mm – all units - max. 1400 mm – with gluing unit - max. 1520 mm – with milling operation D=25 mm EQUIPMENT / SPECIFICATION Console Table / Vacuum System - 2 independently operating shuttle tables in Y-direction (2 Y-axes) - Both shuttles can be synchronized for machining large workpieces (single mode) - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front - Each console fitted with a lifting rail mounted on the side - Console length 1340 mm - 3 retractable lateral stops (2 left, 1 right, mirror position) - Approx. 20 vacuum blocks 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 per field (left/right) Milling Spindle / Units / Tool Changer - Main spindle 7.5 kW (S6 or S1 mode), n max = 18000 rpm, vector-controlled - HSK F63 tool clamping - Liquid cooling with temperature monitoring - NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Auxiliary spindle with permanently mounted gluing unit (with its own X & C axis), 360° edge banding with butt joint gluing - Double edge roll magazines, automatic edge change - Fixed vertical drilling head with 12 spindles (individually selectable) / 6 spindles in X, 7 spindles in Y direction Duodpfx Abewpb Nfshjp Drive motor 4 kW, 4500 – 6000 rpm - 18-position tool changer (carousel type) - Sawing and trimming unit for tool changer - Boring and milling unit with 4 spindles (2 x X-, 2 x Y-direction) - Combination flush trim and scraping knife unit Chip Disposal / Safety / Other - Chip conveyor integrated in machine body - Safety fence left and right of the machine, 1 access door with safety interlock - Extraction port Control / Software: • PowerControl PC85 operating system NOTE: Both machine control computers were replaced in 2020. • WoodWop 5.0 • WoodScout • Power supply 400 V, 50/60 Hz • Cooling unit for control cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied space after installation): L 1150 x W 700 x H 290 cm Availability: Immediately

Condition: used, machine/vehicle number: 008246, Position 1: Single Edgebanders HOMAG-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG-KAL 310 + ZHR 05 Duodpfx Abex A Hi Iohjp

Condition: used, machine/vehicle number: 008325, Position 1: Single Edgebanders HOMAG-KDF 860 C Position 2: Panel Return Systems HOMAG-KDF 860 C Duodpex Hpklefx Abhop

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, serviced regularly (last service by Homag in 11/2024) Features and technical specifications: Duodpfxjwx Aaqs Abhsp Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) Minimum edge thickness: 0.3 mm (roll material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (roll material) / 20 mm (strip material) Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-controlled Heat-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, can be switched manually) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush milling: via pre-milling unit, pneumatically adjustable Radius milling: FK13 contour routing unit, automatic 8-position tool changer (R = 2 mm) Bevel/profile milling: yes, via FK13, pneumatically adjustable Scraper: integrated in multi-finishing unit MN21 Polishing: buffing unit in finishing module FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Release agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU Directive 98/37/EC Dimensions / required space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system visible in the pictures is not included in the scope of supply! Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software Dodpfxex Irzce Abhoup

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC machining center • Homag BOF 321, year 1998 designed for the production of stairs and other components. • Homag PC83 control system • Working area X = 5,200 mm • Working area Y = 1,300 mm • Working area Z = 410 mm • Number of milling spindles: 2 • Milling spindle motors: 12 kW • Maximum speed: 24,000 rpm • Swivel arm: Yes • 4-axis machine • Tool clamping system: HSK-F63 • Two tool magazines: 12 tools each • Double working area • Number of operator consoles: 10 • Vacuum pump: 2 • Vacuum pump capacity: 100 m³/h • Safety device: safety mat • CE marking: Yes Duodpfx Ajx S Ewrjbhep

Condition: used, machine/vehicle number: 008412, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Dusdpjyilxmefx Abhsp Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Year of construction: 2006, Homag Optimat KAL310/6/A3/S2 Edgebanding Machine, 6-Position Tape Cart, Quickmelt Glueing Unit QA3, Approx. 1100mm Wide Machine Roller With Conveyor, Tilting Outfeed Conveyor to Return Belt Conveyor, Windows Based Control. Serial No. 0-200-15-4533 (2006). Country of Origin: Germany Dusdpfx Aboyil Arohjp A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 5,383 h, The HOMAG DRILLTEQ V-200 is a compact and highly efficient CNC vertical machining center designed for precise drilling, grooving and routing operations in furniture and cabinet production. Thanks to vertical processing, the machine requires minimal floor space while offering high flexibility and productivity. It is ideal for batch size 1 production as well as serial manufacturing. Dusdpfjym Ny Sex Abhsp The machine is in very good technical condition and can be inspected under power.

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Dsdpfsx Swf Usx Abhsup

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Homag Edgeteq S 300 / KDF 440 C Edgebander Variable feed speed 8–14 m/min Boomerang TFU 140/20 interface Upper roller pressure Separating agent spraying unit for workpiece Joint trimming unit 40 mm joint cutter set Interface for Baltivan pre-melter QA65 N 1200 / 1400 gluing station Coated tank for EVA/PU adhesives Edge magazine for 3 mm and up Edge thickness up to 8 mm Pressure zone with 2 additional pressure rollers Front and rear edge lubricant End trimming unit Antistatic solution spraying system Multi-stage trimming unit Copying / profiling unit Dusdpfx Abjymz T Rehep Multi-stage scraper MZ40 unit Workpiece cleaning agent spraying unit Brush unit with 2 motors PowerTouch control system The machine is sold without tools Only approx. 1,300 operating hours! Available April 2026

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 7,500 mm, total width: 970 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Duedpfx Asychw Isbhsp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Dusdpfx Aeylp Slsbhop Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 0-250-84-4817, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,250 mm, controller manufacturer: HOMATIC, total height: 2,800 mm, table length: 4,300 mm, table width: 2,250 mm, controller model: PC86 PowerControl, spindle motor power: 12,000 W, Equipment: documentation/manual, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machine Year of manufacture: 2019 Maximum workpiece dimensions: • X-axis: 4300 mm • Y-axis: 2250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm EQUIPMENT / SPECIFICATION MATRIX-PRO working table, size 4300 x 2250 mm - 4 pneumatically retractable stoppers w. sensor monitoring - 3 vacuum pumps, capacity 290/345 m3/h each at 50/60 Hz, total 870/1035 m3/h - 2 vacuum fields with each 2150 x 2250 mm - Safety mats, safety fences with door - Main spindle motor 11 kW, 24.000 rpm - liquid-cooled - spindle with C-axis - tool clamping system HSK F63 - Tracing system SENSO-FLEX, controllable in z-direction - vertical drilling unit w. 21 spindles, drive motor 2.3 kW - 14-fold tool changer (disk type) Duodpex Rcdasfx Abhsp 1 CONVEYOR ROLLER TABLE 7080 x 2200 mm Control / software: - PowerControl PC86 power touch - WoodWop Machine dimensions 11,60 x 4,50 x 2,80 m Available from week 28/2026