Cardboard cutter buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
2
cutting length: 1200 mm Dchfx2kiy more
6
Cardboard cutter Y88it238f Schimanek Model 15-110 Year ± 1970´s ? Cutting width 110 cm Table size Steel plate Details photo´s are of previous refurbished machine, we have 1 more Schimanek 15-110 like this. Available ± 2 weeks after order more
Sheet width uncut: 2870mm max., sheet size: 1549 x 2870mm max., sheet size with skip feed: 2083 x 2870mm max., sheet size: min. 380 x 356mm, print area: 1550 x 2745mm, printing mechanisms: 2, printing plate height: 6mm, printing from the bottom, material thickness: 10mm max. 7d20df0sw more
5
Botlm3u3Cardboard cutter FOMM Model: 110 Year: ± 1950 Cutting width: 110 cm Table size: Iron caset (120 cm x 95 cm) Details: Comes with brand new upper and lower knive Available: Direct more
5
End-milling cutters, end mills, milling cutters, six-Schneider-finishing cutter finishing cutter diameter 32 mm usable length 130 mm corner radius 4 mm type HSSE number 12-piece is completely sold-weight 17.5 kg Qlk02o2jc more
5
Speed: 2800 RPM Ovt7vd0z Milling cutter diameter: 250 mm Hole diameter: 40 mm With pneumatic clamping device Height and depth adjustment via handwheels more
6
Swivel spindle milling PANHANS type 231 very good condition, the engine comes from a small village shop with 3 people, it was little used everything works fine all bearings and guides are OK Year of construction: 2000 on the shaper fence there are 2 adjustment screws, with a set screw a stop baking in the depth can be adjusted by using scale, also dressing works, E.g. in a gluing profile can be accomplished, with the other adjustment screw can be the complete Shaper fence in the deep are ... more
4
1 used plasma-cutter Cebora Plasmaprof 50 capacity: 50 A (at 35% ED) / 30 A (at 100% ED) 2 cutting-steps cuts with pressure air, need 4.7 bar power: 400 V 50 Hz space requirements: 500 x 350 x 700 mm 8av79jjy0 weight: appr. 80 kg with torch and cutting-pistol (like new) more
6
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically adjustable with digital display Height adjustment electrically adjustable with digital display and in Krems Valley display Speeds in 100 steps adjustable from 1000 to 10000 RPM Spindle diameter 30 mm Control Panel up, swivel Comfort fence with fine adjustment by Handwheel and... more
3
Droessert ST 75x105 (Ref.: 1001569) Bm0zimpo Delivery: Immediately more


cardboard ...
every day

New machines via email!

Be informed!
3
Link pipe cutter, pipe cutter-intersecting pipe diameter 80-200 mm-is the number of links the device to the desired pipe diameter adapted steel cutting wheel-Ideal for working in the trench carrying case Weight 11 kg 3txf9sjv more
6
Maximum cutter diameter: 300 mm maximum notching width: 325 mm M7n0d Max. Notching depth 110 mm Max. Profile height 150 mm Pneumatic material release Mikrosprueheinrichtung Manual feed more
6
Swivel spindle milling PANHANS type 231 very good condition, the engine comes from a small village shop with 3 people, it was little used everything works fine all bearings and guides are OK Year of construction: 2000 on the shaper fence there are 2 adjustment screws, with a set screw a stop baking in the depth can be adjusted by using scale, also dressing works, E.g. in a gluing profile can be accomplished, with the other adjustment screw can be the complete Shaper fence in the deep are ... more
2
1 used plasmacutter Jaeckle Plasma 30-60 2 steps: 30 A and 60 A cuts with pressure air needs 5.5 bar / 160 ltr/min high-frequency ignition weight: 81 kg Mv7e2 dimensions: 530 x 610 x 810 mm more
6
X-axis (column, long): 650 mm y-axis: vert. 270 mm z-axis: quer 270 mm workpiece dimensions max.: Dm=300 mm table - swiveable: 175 Grad Table dimensions: 1200x280 mm control: Helitronic Cip4 max. dia. of grinding wheel: 200 mm tool taper: SK50 rpm spindle (continous): 3500-4500;6000-9000 U/min interface: RS 232 Interface grinding head - swivable: horiz. 220 ° grinding head - swivable: vert. 360 ° centre height: 154 mm total power requirement: 23,0 kW weight of the machine ca.: 3,0 t dimensions e... more
5
cutting width:2500 mm Numbers of torche:2 Dpiovrn Type of gas: total power requirement: kW weight of the machine ca.:4,1 t cutting length:6000 mm HPM Steel Max plasma cutting machine, cutting range 2500 x 6000 mm, incl. Hypertherm plasma unit HPR 260 XD, incl. drilling unit, filter unit more
4
Pipe cutter, pipe cutter-intersecting pipe diameter 2 "-4" inch steel cutting wheel-Ideal for working in the trench Weight 4 kg 3upa7umf more
6
Milling cutter diameter of 280 mm Milling bore 40 mm. Bahvb7wyno Stroke 550 mm Feed automatically Profile height of max 200 mm Pneumatic material release more
1
Description: Suitable to grind manually straight and spiral fluted cutting tools like end mills, shell end mills, taps, step drills, counter-sinks etc., no matter if left or right hand cutting. Specifications: Centre height 175 mm, max. workpiece weight 15 kg, workholding device adaption ST 40, collets for direct clamping in the workholding spindle up to 32 mm, indexing by using index plates 2 - 38 teeth, spiral angle stepless adjustable left and right hand 0 - 90°, max. grinding length 155 mm,... more
4
BOBST E.R. Rotary Cutter and Creasing machine for Corrugated board Kreisschere und Rillmaschine fuer Wellpappe Serial no.: 1025 Baf800zf9q Machine No. 11758 Format max.: 1650x1200 mm / min.: 250 mm Speed: max. 3600 /std more
5
grinding diameter max.: 200 mm grinding length: 300 mm workpiece length: 400 mm table surface area: 650 x 110 mm max. workpiece size: ca. 150 mm min/max. table longitudinal travel: 300 mm/min table cross movement: 150 mm table swivelabel +/-: 45 ° feed of spindle: 150 total power requirement: 1,0 kW weight of the machine approx.: 750 kg S8ym023ou space requirements of the machine approx.: L:1,2 x B:0,8 x H: 1,4 m adjustment of the grinding spindle head: height: 200mm; grinding spindle head is s... more
2
for Horizon FC (Frontcutter) Fzxdtvx more
5
End-milling cutters, end mills, milling cutter-Two-finishing cutter diameter 32 mm usable length 80 mm corner radius of 2 mm type KHSS e-Number 15-piece is completely sold-Weight 11 kg Lh8yl more
6
Milling cutter diameter of 280 mm Baglbh7qao Milling bore 40 mm. Stroke 550 mm Manual feed Profile height of max 200 mm Pneumatic material release more
3
Make: Amada Type: TOGU III Year of construction: 08/2000 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Engine performance -Sharpening: 1,5 kW, 300... more
4
cut with compressed air! 2 cutting levels: 25 and 50 a. Cutting capacity up to 20 mm (material-dependent) Ignition: High voltage Mains voltage: 400 V 50 Hz Mains fuse (slow-acting) 32 / 25 A Power supply: 16.0 kVA Type of protection: IP 22 Cutting current 50 A 50% ED Plasma gas: Air 0.5 MPa Cooling: Water 0.34 MPa Weight: approx. 80 kg Dimensions approx. 740 x 490 x 680 mm can be used for welding with increased hazard of electric shock to operate also with machine ... more
4
grinding length: 450 mm grinding diameter: 200 mm workpiece height: 220 mm spindle speed max.: 6300 U/min grinding wheel diameter: 200 mm grinding head vertical adjustable: 220 mm grinding spindle - swivable: 306 ° table surface area: 240x1000 mm Lqzwn table adjustment: schräg 7° re/li ° table travel longitudinal: 450 mm table travel cross: 260 mm total power requirement: 1,14 kW weight of the machine ca.: ca. 1,5 t space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m transport measur... more
3
Article number: MA1004 Manufacturer: Trumpf Type: 6840-H3 Year of construction: 1989 Machine number: 968 Msiof Length [mm]: 600 Width [mm]: 600 Height [mm]: 1800 Weight [kg]: Approx. 350 Power supply: 380V / 1,7KVA Accessories: All recordings available for multi tool stamps and matrices as well as stripper more
5
End-milling cutters, end mills, milling cutters, six-cutter roughing-diameter 32 mm usable length 200 mm type HSSE Co-Number 11-piece is completely sold-Weight 15 kg Qllbdxrnx more
5
Pneumatic clamping of material manual feed Maximum cutter diameter: 250 mm Profile height: 150 mm E3eql72tq Maximum cutting width: 305 mm Max milling depth: 95 mm more
1
Make: Amada Type: TOGU EU Year of manufacture: 10/2013 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Engine performance -Sharpening: 1,5 kW, 3000 ... more
2
bearing load 200 kg gripping range 400 to 600 mm Yxcjaf83u 1 pieces available weight 22 kg more
5
voltage: 220/380 V current: 4,1/2,3 A height over floor: 1300 mm table - swiveable: 360 Grad table adjustment - upside direction: 130 mm Table dimensions: L:560xB:150 mm throat: Tisch/tabel=150-400 mm total power requirement: ca. 1,0 kW weight of the machine approx.: 252 kg S8wfaqqtd space requirements of the machine approx.: L:0,9xB:0,8xH:1,45 m table travel: x-axis (longitudinal) =480mm y-axis (transverse)=250mm z-axis(vertical)=150mm incl. accessories [...] more
6
We offer you, a used notching thrower the Herstller Haffner. with various cutters. Cxnumr7 Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to change! more
4
Pipe cutter, pipe cutter-intersecting pipe diameter 4 "-6" inch steel cutting wheel-Ideal for working in the trench Weight 8 kg Qlm9m7jii more
4
hydraulic paper press capacity: 8 tons chamber-dimensions 800 x 600 x 1200 Dvyzyu driveable with 4 wheels more
6
x-travel: 4300 mm y-travel: 2100 mm Plasma power source Nertajet 320-640 - cutting capacity: inox 60 - 130 mm Plasma power source Nertajet 320-640 - cutting capacity: mild steel S235 : 20 -40 mm Plasma power source Nertajet 320-640 - cutting capacity: Leichtmetall /[...] : 70 - 150 mm Plasma power source Nertajet 120 - cutting capacity : mild steel: 1 -15 mm Plasma power source Nertajet 120 - cutting capacity : high alloy steel: 10 - 25 mm control: DIGISAF burner heads: 3 Stück total power r... more
5
• overall dimensions 2400x1600x1400 mm; 9uq287edj • bowl capacity 120 litres; • 6 knives; • knives power 31/40 kW; • bowl power 1.0/1.4 kW; • mixing power 1.3/1.8 kW; • unloader power 0.75 kW; • power supply 400 V; • bowl power 4 kW; • 2 knives speeds 1500/3000 rev/min; • 2 bowl speeds; • 2 mixing speeds; • unloader. more
5
Drehmeisselaufnahme, CNC Inndrehmeisselaufnahme outer diameter 60 mm is sold as a package-Weight 2 kg Dufale more
5
Maximum cutter diameter: 300 mm Automatic hydro feed up to 600 mm Digital display of the cutting height 7jtgpgxwb Maximum notching width: 350 mm Maximum notching depth: 110 mm Profile height: 190 mm more
5
Type: SPM100 Second-hand machine Fn0kaf9 Zangenspannfgutter: Use diameter 10mm Speed: 12000 RPM Simultaneous editing on 2 stands Minimum stand size: 20 x 40mm Maximum size of the stand: 100 x 120mm Location: Camp / 82281 Egenhofen - Herrnzell more
1
Register - or paper punch by Krause with foot pedal, the blades are double-sided 22 cm in length, the cutting length can be adjusted on both sides existing attacks. Liybd3fp more
2
Schleif-Ý - max. 300 mm grinding length 400 mm workpiece length mm table surface area 900x400 mm table speeds 5-5000 mm/min swivellable 90 ° stroke 400 mm grinding spindle speed 4n: 2100-600 U/min Schleifscheiben-Ý 150 mm grinding wheel motor 0,65/1 kW turning speed range U/min electrics - voltage/frequency 30/50 V/Hz total power requirement kW weight of the machine ca. 1 t dimen... more
6
Year: 2006 Working hours machine: 38.706 h (13.06.2017) Working hours laser on: 38.073 h (13.06.2017) Working hours beam on: 13.949 h (13.06.2017) Laser power: 4000 Watt Working range: 3000 x 1500 mm Control: Siemens Sinumerik 840 D Max. mild steel approx.: 20 mm Max. stainless steel approx.: 15 mm Max. aluminium approx.: 8 mm Space reqired approx.: 9300 x 4600 x 2000 mm Machine weight approx.: 11.500 kg Electrical connected load approx.: 88 kVA Standard configuration - Closed machine frame wit... more
5
Radii cutter, cutter finishing cutter 1x diameter 115 mm Height 36 mm R18 mm 1x diameter 120 mm height 35 mm R17, 5 mm 1x diameter 90 mm height 20 mm R10 mm 1x diameter 120mm height 40 mm R 20 mm type HSS and SS-number 4-piece is completely sold-weight 5.6 kg Qlr78o0i3 more
3
Year of construction 1983 Good condition, regularly maintained and ran until recently in the production. The engine was used only in single-shift operation and was in the last few years approx. 10-20 hrs / week in use. The machine is still connected and can be demonstrated. Technical data: Grinding diameter of 260 mm Grinding length 610 mm Y-axis 230 mm Zaxis 280 mm Tip height 115 mm Swing diameter 260 mm Total power consumption 1.3 kW Machine weight approx. 1.4 t Space requireme... more
2
Speed: up to 34.200 cuts/h reading: OMR Bah2alwdnn more


cardboard ...
every day

New machines via email!

Be informed!

to

to

Change search
CARDBOARD CUTTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close