Core cutter buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
rilling, cutting , die-cutting 3x8lvg70y more
3

Core cutter Langer 17183

Lauda - Königshofen Germany
6648 km
1979
USED
Sleeves Schneider long type 17183 Ms.Nr 171803, built in 1979, in good condition, available immediately 73frxewil more
4
End-milling cutters, end mills, milling cutters, radius cutters Two-Schneider-finishing end mills, roughing end mills-Various Diameter Number 15-piece is completely sold-Weight 10 kg Uzepg more
4
1 used plasma-cutter Cebora Plasmaprof 50 capacity: 50 A (at 35% ED) / 30 A (at 100% ED) 2 cutting-steps cuts with pressure air, need 4.7 bar power: 400 V 50 Hz space requirements: 500 x 350 x 700 mm weight: appr. 80 kg 8av79jjy0 with torch and cutting-pistol (like new) more
6
Maximum cutter diameter: 300 mm maximum notching width: 325 mm Max. Notching depth 110 mm M7n0d Max. Profile height 150 mm Pneumatic material release Mikrosprueheinrichtung Manual feed more
6
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake R/L barrel Swivel angle from - 5 to 45 degrees electrically adjustable with digital display Height adjustment electrically adjustable with digital display and in Krems Valley display Speeds in 100 steps adjustable from 1000 to 10000 RPM Spindle diameter 30 mm Jiblxrb Control Panel up, swivel Comfort fence with fine adjustment by Hand... more
3
Droessert ST 75x105 (Ref.: 1001569) Bm0zimpo Delivery: Immediately more
5
grinding diameter max.: 200 mm S8ym023ou grinding length: 300 mm workpiece length: 400 mm table surface area: 650 x 110 mm max. workpiece size: ca. 150 mm min/max. table longitudinal travel: 300 mm/min table cross movement: 150 mm table swivelabel +/-: 45 ° feed of spindle: 150 total power requirement: 1,0 kW weight of the machine approx.: 750 kg space requirements of the machine approx.: L:1,2 x B:0,8 x H: 1,4 m adjustment of the grinding spindle head: height: 200mm; grinding spindle head is s... more
5
Radii cutter, cutter finishing cutter 1x diameter 115 mm Height 36 mm R18 mm 1x diameter 120 mm height 35 mm R17, 5 mm 1x diameter 90 mm height 20 mm R10 mm 1x diameter 120mm height 40 mm R 20 mm type HSS and SS-number 4-piece is completely sold-weight 5.6 kg Qlr78o0i3 more
2
Mv7e21 used plasmacutter Jaeckle Plasma 30-60 2 steps: 30 A and 60 A cuts with pressure air needs 5.5 bar / 160 ltr/min high-frequency ignition weight: 81 kg dimensions: 530 x 610 x 810 mm more


core cutter
every day

New machines via email!

Be informed!
6
Milling cutter diameter of 280 mm Milling bore 40 mm. Stroke 550 mm Feed automatically Bahvb7wyno Profile height of max 200 mm Pneumatic material release more
5
cutting width:2500 mm Numbers of torche:2 Type of gas: Dpiovrn total power requirement: kW weight of the machine ca.:4,1 t cutting length:6000 mm HPM Steel Max plasma cutting machine, cutting range 2500 x 6000 mm, incl. Hypertherm plasma unit HPR 260 XD, incl. drilling unit, filter unit more
1
Description: Suitable to grind manually straight and spiral fluted cutting tools like end mills, shell end mills, taps, step drills, counter-sinks etc., no matter if left or right hand cutting. Specifications: Centre height 175 mm, max. workpiece weight 15 kg, workholding device adaption ST 40, collets for direct clamping in the workholding spindle up to 32 mm, indexing by using index plates 2 - 38 teeth, spiral angle stepless adjustable left and right hand 0 - 90°, max. grinding length 155 mm,... more
6
X-axis (column, long): 650 mm y-axis: vert. 270 mm z-axis: quer 270 mm workpiece dimensions max.: Dm=300 mm table - swiveable: 175 Grad Table dimensions: 1200x280 mm control: Helitronic Cip4 max. dia. of grinding wheel: 200 mm tool taper: SK50 rpm spindle (continous): 3500-4500;6000-9000 U/min interface: RS 232 Interface grinding head - swivable: horiz. 220 ° grinding head - swivable: vert. 360 ° centre height: 154 mm total power requirement: 23,0 kW weight of the machine ca.: 3,0 t dimensions e... more
5
Drehmeisselaufnahme, CNC Inndrehmeisselaufnahme outer diameter 60 mm is sold as a package-Weight 2 kg Dufale more
1
1100 Watts, for drill bits 10-90 mm with drill stand 500 mm FF91 Conkw0 more
6
Milling cutter diameter of 280 mm Baglbh7qao Milling bore 40 mm. Stroke 550 mm Manual feed Profile height of max 200 mm Pneumatic material release more
4
BOBST E.R. Rotary Cutter and Creasing machine for Corrugated board Kreisschere und Rillmaschine fuer Wellpappe Serial no.: 1025 Machine No. 11758 Format max.: 1650x1200 mm / min.: 250 mm Speed: max. 3600 /std Baf800zf9q more
2
for Horizon FC (Frontcutter) Fzxdtvx more
4
grinding length: 450 mm grinding diameter: 200 mm workpiece height: 220 mm spindle speed max.: 6300 U/min grinding wheel diameter: 200 mm grinding head vertical adjustable: 220 mm grinding spindle - swivable: 306 ° table surface area: 240x1000 mm table adjustment: schräg 7° re/li ° table travel longitudinal: 450 mm table travel cross: 260 mm total power requirement: 1,14 kW weight of the machine ca.: ca. 1,5 t Lqzwn space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m transport measur... more
5
Drehmeisselaufnahme, CNC Inndrehmeisselaufnahme-Various sizes outer diameter 63 mm is sold as a package weight 9.5 kg Qk2o0jszp more
3
Make: Amada Type: TOGU III Year of construction: 08/2000 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Engine performance -Sharpening: 1,5 kW, 300... more
5
Pneumatic clamping of material manual feed Maximum cutter diameter: 250 mm E3eql72tq Profile height: 150 mm Maximum cutting width: 305 mm Max milling depth: 95 mm more
4
cut with compressed air! Q7vqzo9q 2 cutting levels: 25 and 50 a. Cutting capacity up to 20 mm (material-dependent) Ignition: High voltage Mains voltage: 400 V 50 Hz Mains fuse (slow-acting) 32 / 25 A Power supply: 16.0 kVA Type of protection: IP 22 Cutting current 50 A 50% ED Plasma gas: Air 0.5 MPa Cooling: Water 0.34 MPa Weight: approx. 80 kg Dimensions approx. 740 x 490 x 680 mm can be used for welding with increased hazard of electric shock to operate also wit... more
3
Article number: MA1004 Manufacturer: Trumpf Type: 6840-H3 Year of construction: 1989 Machine number: 968 Length [mm]: 600 Width [mm]: 600 Height [mm]: 1800 Weight [kg]: Approx. 350 Msiof Power supply: 380V / 1,7KVA Accessories: All recordings available for multi tool stamps and matrices as well as stripper more
6
x-travel: 4300 mm y-travel: 2100 mm Plasma power source Nertajet 320-640 - cutting capacity: inox 60 - 130 mm Plasma power source Nertajet 320-640 - cutting capacity: mild steel S235 : 20 -40 mm Plasma power source Nertajet 320-640 - cutting capacity: Leichtmetall /[...] : 70 - 150 mm Plasma power source Nertajet 120 - cutting capacity : mild steel: 1 -15 mm Plasma power source Nertajet 120 - cutting capacity : high alloy steel: 10 - 25 mm control: DIGISAF burner heads: 3 Stück total power r... more
4
Side milling cutters, saw blade milling cutter different manufacturers, different-diameter type HSS or SS is completely sold-weight 2.5 kg Licm7 more
1
Make: Amada Type: TOGU EU Year of manufacture: 10/2013 Technical data -Tool diameter min/max: 2/160 mm -Maximum tool height: 150 mm (about three jaw Chuck) -Max looping delivery: 0.99 mm -Grinding motor delivery: 240 mm -Rapid traverse speed: 600 mm / min -Positioning speed: depending on size of station -Grinding speed: 0.06 mm / min (type A) to 0.03 mm / min (type E) -Coolant tank: 20 litres -Electrical power: 4.8 kVA, 400 V, 50 Hz Engine performance -Sharpening: 1,5 kW, 3000 ... more
6
We offer you, a used notching thrower the Herstller Haffner. Cxnumr7 with various cutters. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, sale. Please enter your full contact details to get a quote with our terms and conditions and terms of payment. Mistakes in the descriptions and offerings are subject to change! more
5
voltage: 220/380 V current: 4,1/2,3 A height over floor: 1300 mm S8wfaqqtd table - swiveable: 360 Grad table adjustment - upside direction: 130 mm Table dimensions: L:560xB:150 mm throat: Tisch/tabel=150-400 mm total power requirement: ca. 1,0 kW weight of the machine approx.: 252 kg space requirements of the machine approx.: L:0,9xB:0,8xH:1,45 m table travel: x-axis (longitudinal) =480mm y-axis (transverse)=250mm z-axis(vertical)=150mm incl. accessories [...] more
4
End-milling cutters, end mills, milling cutters, six-cutter roughing-Various diameter type HSS Number 11-piece is only completely sold-Weight 6 kg Qlmxb3lxm more
5
• overall dimensions 2400x1600x1400 mm; • bowl capacity 120 litres; • 6 knives; • knives power 31/40 kW; • bowl power 1.0/1.4 kW; • mixing power 1.3/1.8 kW; • unloader power 0.75 kW; • power supply 400 V; • bowl power 4 kW; • 2 knives speeds 1500/3000 rev/min; • 2 bowl speeds; • 2 mixing speeds; 9uq287edj • unloader. more
5
Maximum cutter diameter: 300 mm Automatic hydro feed up to 600 mm 7jtgpgxwb Digital display of the cutting height Maximum notching width: 350 mm Maximum notching depth: 110 mm Profile height: 190 mm more
5
Type: SPM100 Second-hand machine Zangenspannfgutter: Use diameter 10mm Fn0kaf9 Speed: 12000 RPM Simultaneous editing on 2 stands Minimum stand size: 20 x 40mm Maximum size of the stand: 100 x 120mm Location: Camp / 82281 Egenhofen - Herrnzell more
1
Register - or paper punch by Krause with foot pedal, the blades are double-sided 22 cm in length, the cutting length can be adjusted on both sides existing attacks. Liybd3fp more
6
Year: 2006 Working hours machine: 38.706 h (13.06.2017) Working hours laser on: 38.073 h (13.06.2017) Working hours beam on: 13.949 h (13.06.2017) Laser power: 4000 Watt Working range: 3000 x 1500 mm Control: Siemens Sinumerik 840 D Max. mild steel approx.: 20 mm Max. stainless steel approx.: 15 mm Max. aluminium approx.: 8 mm Space reqired approx.: 9300 x 4600 x 2000 mm Machine weight approx.: 11.500 kg Electrical connected load approx.: 88 kVA Standard configuration - Closed machine frame wit... more
5
Wood cutter, milling head, milling cutter, wood cutter, profile cutter-outer 180 mm -2 Router Price fully-Weight 12 kg Qlx3mofi2 more
2
Schleif-Ý - max. 300 mm grinding length 400 mm workpiece length mm table surface area 900x400 mm table speeds 5-5000 mm/min swivellable 90 ° stroke 400 mm Bafxdy0obt grinding spindle speed 4n: 2100-600 U/min Schleifscheiben-Ý 150 mm grinding wheel motor 0,65/1 kW turning speed range U/min electrics - voltage/frequency 30/50 V/Hz total power requirement kW weight of the machine ca. ... more
3
Year of construction 1983 Good condition, regularly maintained and ran until recently in the production. The engine was used only in single-shift operation and was in the last few years approx. 10-20 hrs / week in use. The machine is still connected and can be demonstrated. Technical data: Grinding diameter of 260 mm Pti7pi Grinding length 610 mm Y-axis 230 mm Zaxis 280 mm Tip height 115 mm Swing diameter 260 mm Total power consumption 1.3 kW Machine weight approx. 1.4 t Space r... more
2
Speed: up to 34.200 cuts/h Bah2alwdnn reading: OMR more
6
Year: 2007 Working hours machine: 53.174 h (04.07.2017) Working hours laser on: 52.689 h (04.07.2017) Working hours beam on: 23.493 h (04.07.2017) Laser power: 5000 Watt Working range: 3000 x 1500 x 115 mm Control: Siemens Sinumerik 840 D Max. mild steel approx.: 25 mm Max. stainless steel approx.: 20 mm Max. aluminium approx.: 12 mm Space reqired approx.: 11100 x 4600 x 2400 mm Machine weight approx.: 12.000 kg Electrical connected load approx.: 105 kVA Standard configuration - Closed machine ... more
5
End-milling cutters, end mills, milling cutters, four-cutter roughing and finishing mill diameter 25 mm usable length 45 mm corner radius 4 mm type HSSE COE number 24-piece is completely sold-Weight 10 kg Qlylji8sn more
6
machine no.: 1010 7naz7e2z0 working width: 1400 mm, more
6
Milling cutter diameter of 280 mm Hwmj37fx Milling bore 40 mm. Stroke 550 mm Manual feed Profile height of max 200 mm more
1
1 hydraulic core drill motor with 1 1/4 "spindle: B0k2mldy 1 x core drill Cedima HM 51 with Parker BSP-1 hydraulic motor for drilling diameter 51-151 mm without additional accessories more
1
speed: up to 34.200 cuts/h Konfiguration: singlecutcrossknife, 1-up (without middlecut), edge trim M3rcx Reading: OMR-readinghead from the top connection: Partyline zu K2500 more
6
Year: 2003 Working hours machine: 39.884 h (02.11.2017) Working hours laser on: 39.652 h (02.11.2017) Working hours beam on: 11.390 h (02.11.2017) Laser power: 4000 Watt Working range: 3000 x 1500 mm Control: Siemens Sinumerik 840 D Max. mild steel approx.: 20 mm Badsc0pkj9 Max. stainless steel approx.: 15 mm Max. aluminium approx.: 8 mm Space reqired approx.: 9300 x 4600 x 2000 mm Machine weight approx.: 11.500 kg Electrical connected load approx.: 88 kVA Standard configuration - Closed machi... more


core cutter
every day

New machines via email!

Be informed!

to

to

Change search
CORE CUTTER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close