Used Reflection Densitometer for sale (596)

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Lrsdpfexv D Dcex Afuet Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: good (used), Year of construction: 1992, functionality: limited functionality, machine/vehicle number: 1200, Hundegger P10 – Year of manufacture 1992 – partially modernized control system – good mechanical condition For sale: well-maintained Hundegger P10 cutting machine, year of manufacture 1992, with extensive equipment. Mechanical components in good condition, control system modernized (data import via USB drive, DOS conversion). 3 measuring scales are missing – the price reflects this. The machine is currently still in operation and can be tested on-site. Technical equipment: Swivel saw, notching milling cutter, rafter nail drilling unit, edge bender, blade milling cutter, horizontal and vertical drill Three-sided cutter, vertical milling cutter, finger cutter, panel cutter, ejector and transverse conveyor For an additional charge, the machine can be delivered throughout Europe – Delivery does not include unloading or assembly. Lrodpfx Afozu Anweuot Currently, the cutting system is being dismantled for transport and temporarily stored. A demonstration in operation is no longer possible. However, a video in processing mode can be provided for a better assessment.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Lredozwvb Aepfx Afuet Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: like new (used), 10 - 30 V DC , 200 mA switchable, with on/off delay Lrjdpfx Aozfghpofuet Length: 85 mm Diameter: 30 mm Weight: 205 g Condition: like new

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 41000137, number of ink cartridges: 7, color channels: 7, • One-Shot Color, • Gigabit LAN, • In-Line densitometer • Scroll rollers • Enhanced Productivity Mode (EPM) • 5th unit with OFIR (On-Press Fast Ink Replacement), • 6th and 7th color units • Unwinder/Rewinder, Flex-pack-arm, Simplex-duplex re-insertion • In-Line priming unit (ILP) + 1 normal roller + 1 wine roller • Web guide ILP unit • DP680 upgrade kit HP SmartStream Labels & Packaging for HP Indigo WS6000, Powered by ESKO V5.2.3 • HP SmartStream IN100 Labels and Packaging Server, Powered by EskoArtwork • HP SmartStream Labels & Packaging Color Kit, Powered by EskoArtwork Ledpfjzp U U Ejx Afuort More information: 1. The press is still in production. 2. The press has an HP service contract for spare parts, a service contract, and technical support with an official HP certified representative. 3. The press is available for visit and inspection at the production site until August 25, 2026. 4. On August 26-27, 2026, the press will be cleaned, disassembled, and palletized by the technical service team and stored in the warehouses of an international transport company in Athens. More photos and videos are also available!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 6 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 1,000 mm, working width: 700 mm, Equipment: CE marking, cooling unit, documentation/manual, Laser Cutting Machine Brand: BODOR - TUV - CE - with pneumatic clamping table Type: i5 Table: 1500x700mm Laser: 3000W (required for brass) Including pneumatic clamps/table Main components: 1. Bodorgenius Autofocus laser head 2. Cast iron machine bed 3. Japan YASKAWA servo motor 4. Taiwan ball screw 5. Japan Omron electric component 6. Taiwan square guide rail 7. Exhaust system 8. CW water chiller 9. Bodorpro 2.0 control system 10. Green glass 11. Automatic lubrication device 12. Wifi wireless control 13. Closed protective cover 14. 21.5-inch touchscreen 15. Scan cut (special for high-reflective materials) Ljdpfx Afjyq R N Njujrt Technical parameters: Max cutting area: 700*1500mm X/Y axis positioning accuracy: 0.05mm X/Y axis reposition accuracy: 0.03mm X/Y axis max movement speed: 60m/min Max acceleration: 1.5G Max load capacity: 250kg Dimensions (L*W*H): 2980×2220×1970mm Total weight: 2000kg

Condition: used, This listing is for Specac Quest Single reflection ATR FTIR Accessory The unit is in full working condition and ready for immediate use The Specac Quest is a high-performance single-reflection ATR accessory designed for mid- and far-infrared spectroscopic sample analysis, featuring interchangeable crystal pucks and durable optic Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Lrsdpfjztqgxox Afujt Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. [[1]()]

Condition: new, Year of construction: 2017, height / mm working width / mm distance to reflector / mm Lrodpfx Aoz Dxtfjfuot

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Ljdpfexup Nhex Afuort Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,705 mm, travel distance Z-axis: 250 mm, input voltage: 34,000 V, table length: 3,700 mm, table width: 2,050 mm, operating pressure: 4,150 bar, total height: 3,900 mm, total length: 5,700 mm, total width: 2,550 mm, overall weight: 11,000 kg, product height (max.): 250 mm, For sale is a CNC 5-axis hydro abrasive waterjet cutting system, C.M.S. Tecnocut, including: - CNC Z-axis with 250 mm stroke - Automatic chain conveyor - Abrasive feed system - Electrical system and control cabinet - Reel for water and air - Automatic metering of cutting sand with vacuum monitoring - Additional control panel (manual control) - Automatic central lubrication system - Cooling unit for electrical equipment - Osai CNC control - 34 kW high-pressure pump, Greenjet, 4150 bar, 5 ltr./min. - 5-axis: X 0 to -638 mm / Y 0 to -1028 mm / Z 350 to -100 mm, stroke 250 mm - Programming software TC 2020 - CNC-controlled lathe, R-axis, /min, internal diameter 40 mm / max 200, length 2930 mm / max weight 400 kg - Anti-collision sensor - AWJ anti-reflection plates, spacing 70 mm - Laser for zero point determination - Spray device for cutting head Without warranty, as is, self-removal + shipping Immediately available More pictures to follow Lsdpfx Afsz Atbdeusrt -

Condition: excellent (used), Year of construction: 2010, operating hours: 1,318 h, functionality: fully functional, input voltage: 240 V, input frequency: 60 Hz, We offer a used Kodak NX Imager, model Flexcel NX Digital Flexographic System, year of manufacture 2010. Machine set includes: • Imager (Exposing unit) Lodpfeyrr I Aex Afuort • Laminator • Vacuum cleaner Bonus: Densitometer Machines are in excellent technical condition Laser: 1,318 h, like new, tested Checked and secured for transport by authorized Miraclon service, documented with invoice RIP station requires update due to Windows 10 Full documentation included Cabling, TIL input glass included (disassembled for transport) Laser secured by Miraclon, also disassembled for transport Serial number: TT0531 Date of manufacture: 2010/09/15 Model: TST Rated voltage: 200-240 V Frequency: 50/60 Hz Rated current: 8 A Country of manufacture: China For any questions or if you require additional information, please contact us via email or telephone.

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. Lodsy U H Idopfx Afuert The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Condition: ready for operation (used), Year of construction: 2025, machine/vehicle number: 3401721031, functionality: fully functional, operating hours: 35 h, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 340 mm, cutting width (max.): 500 mm, control type: CNC control, roller diameter: 340 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 1,870 mm, total length: 3,000 mm, total width: 3,000 mm, overall weight: 2,150 kg, table height: 800 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, History, 6-Month Warranty Lredpfx Aezg Hviefuet We offer for sale a professional CNC automatic band saw for metal cutting, PEGAS 340 KATANA X-CNC-LR, designed for both automatic and angular cutting operations in metalworking and fabrication industries. This is not a standard used machine from a production environment. The saw was used as a manufacturer's demonstration machine and has accumulated only approximately 1,000 operating hours since 2017. It has a fully documented history, has been professionally maintained throughout its service life, and remains in excellent technical condition with minimal wear. Main Features ✔ Fully automatic CNC operation ✔ Automatic programmable miter cutting ✔ Saw frame swiveling range from +60° to -45° ✔ Automatic material feed system ✔ Precision ball screw drives ✔ Siemens CNC control system ✔ Cutting program storage and management ✔ Heavy-duty industrial design for long-term operation Key Advantages Only 1,000 Operating Hours Exceptionally low operating time for a machine of this age, reflecting its use as a demonstration unit rather than in continuous production. Manufacturer Demonstration Machine Clear origin, documented service history, and professional maintenance by the manufacturer. 6-Month Warranty Additional peace of mind when purchasing a used machine. Immediate Availability Ready for immediate installation and operation. Significant Cost Savings Acquire a modern CNC band saw at a fraction of the cost of a new machine while maintaining high productivity and cutting accuracy. Demonstration Available The machine can be inspected and tested under power prior to purchase. Machine Condition Fully operational Regularly serviced Approx. 1,000 operating hours Ready for immediate use Available for inspection in Slavkov u Brna, Czech Republic A brand-new machine with full manufacturer's warranty can also be supplied upon request.

Condition: used, mileage: 179,441 km, power: 115 kW (156.36 HP), first registration: 08/2012, overall weight: 7,490 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2012, number of seats: 4, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Equipment: * Body/Superstructure: High-roof box van L3H2, * Cab: Passenger compartment (double cab), * Waelo air conditioning, * Auxiliary heater (water) with timer, * Auxiliary heat exchanger in double cab, * Driver's seat with hydraulic suspension, * Co-driver's seat with storage compartment, * Double seat, passenger compartment on the right, * Sliding door on the right with sliding window (entry), * Roof vent in the cargo area, * Hinged doors (opening angle 270 degrees), * Heat-reflecting glazing, * 6-speed manual transmission, * Tow hitch (drawbar), Lrjdpfx Asz Edk Ejfuet * Ball hitch, Attachments/Installation: * Sortimo workshop equipment, * Ventilation and de-ventilation, * Shelf in the Doka area, * Cotek SP 1000 voltage converter, * Auxiliary headlights, * Cargo area lining, Technology: * Navigation system, * Radio Truckline CD 65 / 70, * Exterior mirrors, electrically adjustable + heated, * Power windows, * Reinforced battery, level 2, * Battery disconnect switch, * High-tone horn, * Rear view camera, * Rotating beacons, Safety/Environment: * Airbag, driver's side, * Differential lock, rear axle, * Engine brake, pneumatically operated, * Suspension: front and rear axle, reinforced leaf spring, * Stabilizer bar, rear axle, * Emission standard EURO 5, Other: * 2 previous owners (re-registration) * German original delivery, * Suspension: leaf spring / leaf spring, * Engine 4.3 L - 115 kW Diesel (OM 904 LA), * Wheelbase 4250 mm, * Permissible total weight 7.49 t, * Data confirmation + COC paper available, Since 1972, your reliable partner for all things automotive/commercial vehicles, located in 28832 Achim, at the Bremer Kreuz. The NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the Internet, on price tags, and in pictures is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: good (used), Year of construction: 2006, operating hours: 20,000 h, Trumpf Haas HL 4006D YAG Solid-State Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and with a range of up to 100 meters via flexible fiber optics. Areas of Application Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated Manufacturing: The laser is designed for integration into automated production lines with industrial robots. Precision Machining: The high power and precise beam quality enable precise work in industrial machining. Technical Specifications Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Laser light wavelength: 1064 nm Nominal voltage: 400 V Nominal power: 132 kW Nominal power consumption: 140 kVA Year of manufacture: Oct 2006 Weight: 1500 kg Operating hours: approx. 20,000 Dimensions (W x H x D): 3200 x 1700 x 1250 mm Laser optics including ILV scanner, pyrometer, and various spare parts Computer with WinLas software for parameter control You can find the right cooling unit and robot in our shop Lredjxg Hpcjpfx Afujt Rehsler TW HL4006D Cooling Unit Kuka KR 30/2 6-Axis Welding Robot Financing through our bank is also possible. komplett-konzept.leasingo.de Other items - new and Used - find it in our shop! International shipping costs on request!

Condition: used, mileage: 22,281 km, power: 96 kW (130.52 HP), first registration: 12/2021, fuel type: diesel, overall weight: 3,190 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 5,339 mm, total width: 2,032 mm, total height: 1,960 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Ford Transit Custom Kombi Trend VIN: WF01XXTTG1MD37493 Chassis / Components: * Tires: 215/65 R16C 109/107T * Remaining tread: Front approx. 30% / Rear approx. 60% * ABS * Trailer hitch * Wheelbase: 3,300 mm Cabin: * 9-seater * Air conditioning, front + rear * Webasto auxiliary heater, 5 kW with remote control * Cruise control * Multifunction steering wheel * Radio * USB * Bluetooth * Hands-free system * FordPass Connect / Mobile Apps * Parking assist / ParkPilot * Driving mode selection * Blind Spot Assist Lsdpfoz Edhkox Afusrt * Cross Traffic Alert * Heat-reflecting glass * Rear window wiper with windshield washer system * 12V sockets Body / Additional equipment: * Kombi / Multi-purpose vehicle * Trend equipment line * Partially converted into a camper van * Side windows, rear left + right * Fiamma F40 Van awning, 270 cm, black * LiFePO4 service battery 12.8 V / 100 Ah * Victron MultiPlus 12/1600/70-16 * Victron BMV-712 battery monitor * Victron SmartShunt 500 A / 50 mV * Battery management system * Shore power connection / Shore power unit Engine / Transmission: * 130 hp / 96 kW // 1,995 ccm // EURO 6 AP * 6-speed manual transmission * Diesel Weights: * Gross vehicle weight: 3,190 kg * Unladen weight: 2,087 kg * Payload: 1,103 kg Other: * First registration: 20.12.2021 * Year of manufacture: 2021 * Mileage: 22,281 km * Color: Frozen White * MOT valid until 06/2027 * German vehicle New MOT/inspection and weight adjustments (increase or decrease) are possible upon request. We won't leave you alone, even after the purchase: We will help you obtain export or short-term registration plates. We can also arrange for the delivery of your vehicle within Germany. Just contact us - we will be happy to help! We speak German, English, and Russian. All information without guarantee. Subject to changes, errors, printing and typographical errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability, and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it's not just the vehicle that matters, but also the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. Therefore, we will support you personally and reliably - from the first contact to the handover of your vehicle. Be convinced for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle delivery If you wish, we will arrange for the delivery of your vehicle within Germany.

Year of construction: 2024, operating hours: 960 h, condition: used, functionality: fully functional, Crusher and Screening Machine Year of manufacture: 2024 Location: 54611 Hallschlag Application: Designed for the reduction of charcoal undersize material, followed by screening and filling into big bags or, alternatively, pneumatic conveying into silos. The smooth roller mill was originally used for the size reduction of clay. These machines offer a wide range of applications and are capable of handling and processing various materials. Plant components: 1. Screw conveyor 1 Lrsdpfsytdgaox Afujt 2. Screw conveyor 2 3. Screw conveyor 3 4. Crusher (smooth roller mill) and steel frame 5. Tumbler screen and steel frame 6. Elevator 1-3 7. Pneumatic conveyor vessel (“sand sender”) 8. Big bag unloading station 9. Piping for extraction/ventilation 10. Electrical/electronic systems in a container The prices listed in the document reflect our acquisition costs. Individual or complete purchase of components is possible. Prices and further technical details available on request.

Condition: used, mileage: 275,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear Lrjdszn El Sjpfx Afuet * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 93,500 km, power: 105 kW (142.76 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, Equipment: air conditioning, airbag, power assisted steering, seat heater, sliding door, soot filter, trailer coupling, E07 Hill-start assist, EY5 Mercedes-Benz emergency call system, F61 Interior mirror, EY6 Breakdown assistance, E43 Trailer socket 13-pin, H21 Heat-reflecting glass with band filter on the windshield, VF7 Fabric Maturin black, J65 Outside temperature display, F68 Exterior mirrors, heated and electrically adjustable, H22 Rear window, heated, M48 Generator 14 V / 230 A, R65 Spare wheel holder under frame end, JG0 Shift point indicator, RS3 Steel wheels 6.5 J x 16, S02 Driver's seat, Z1N Approval N1, Y44 Warning triangle, GE9 6-speed manual transmission, XO9 Mercedes-Benz MobiloVan with roadside assistance and extended warranty, SA5 Airbag driver, XG7 Without payload restriction 3,500 kg, MR6 Emission class Euro 6c N1, IF0 Model series C910 VS30 FWD, E1A MBConnect - 5, JH3 Communication module (LTE) for digital services, X30 Vehicle registration certificate - Part II, T77 Grab handle at the entrance to the cargo area sliding door on partition, W54 Rear doors, split-wing, opening to the side panel, HH9 Semi-automatic climate control system TEMPMATIC, Y10 First aid kit, W17 Window on the right, fixed in side wall/sliding door, ES0 Jump start - connection, Q22 Trailer coupling, fixed ball head, R87 Spare wheel, HI1 Climate zone 1 (cold/comfort), S22 Armrest for driver's seat, W61 Window in tailgate / rear doors, V43 Wooden floor, S23 Passenger seat, single seat, XU1 Signage / printed materials in German, IG5 Basic, IG4 Standard, C6L Multifunction steering wheel, LE1 Adaptive brake light, LA2 Headlamp assistant, ZM0 Panel van, RM7 Summer tires, XM1 Noise reduction measures, D51 Partition wall, continuous with 1 window, D13 Mounting rails for roof rack, IT4 3.5 ton, J10 Speedometer km/h, H16 Seat heating for driver, J58 Seatbelt warning system for driver's seat, FR8 Rear view camera, XZ0 Model generation 0, V94., We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Lodpfez Eirzjx Afuort Leasing/financing and trade-in possible!! !! !! - Errors and prior sale excepted!! - All information without guarantee ... more on our website

Condition: used, maximum load weight: 13,460 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2012, Vehicle no. G0123213_SAMPLE - Manufacturer: Krone. * Sliding roof tarpaulin * Reflective contour marking on side/rear * Load certificate Code-XL * Portal doors with double locking bars (inside) * Sliding side curtain * Suitable for forklift driving inside Lrodpfx Afjz A Rkmjuot * Telescopic support legs * Equipment for rail loading * Lashing options LASI CODE XL!!! Multiple units available! Delivery time upon request! Multi Lock external frame. New tarpaulin. Steel insert slats with integrated combination lashing rail (slotted/perforated). Technically ready for operation with no further repairs required. Partial repainting. Undercarriage with signs of use. UVV valid. Dimensions are approximate. Offer is subject to prior sale, prices quoted are net ex location D-59302 Oelde. Further details on request by phone or email:

Condition: used, mileage: 65,926 km, power: 120 kW (163.15 HP), first registration: 04/2016, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2026, color: blue, gearing type: mechanical, emission class: euro5, number of seats: 6, total length: 6,330 mm, total width: 2,200 mm, total height: 2,400 mm, Year of construction: 2016, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Equipment: * Audio system Audio 15 (radio with color display) * SD/Radio/Tel/Bluetooth * Navigation system Becker MAP Pilot * Overhead control panel with reading light, driver/passenger side * Digital tachograph, downloadable * Steering wheel with multi-function buttons incl. trip computer * Interior rearview mirror, rear wall with window * Seats in the cab: Comfort suspension seat, driver's side * Heat-reflecting glass (windshield with band filter at the top) * Airbag, driver's side * Lockable glove compartment * Smoker's package * Safety belt system with warning system (driver's side) * Seat cover/upholstery: Fabric Lima * Seats in the cab: Adjustable passenger seat * Central locking * Double cab with 6 seats ----* Exterior mirrors, electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal * Adaptive brake light * Headlight range adjustment ----* Model update, engine 2.1 L - 120 kW CDI CAT * Braking system with ABS+ASR * 6-speed manual transmission * Twin tires on 2nd axle / rear axle * Spare wheel holder under the end of the frame incl. jack * Lane keeping assist ----* MEILLER three-sided tipper, steel * Ball coupling with 13-pole trailer socket ----* Tire size: 205/75R16c * Fuel tank: 75 liters * Technical gross vehicle weight: 4600 kg * Technical gross train weight: 7000 kg * Unladen weight: 2975 kg * Permissible trailer load: 3500 kg * Overall length: 6330 mm * Wheelbase: 3665 mm * Inspection due: / ----Vehicle number: 12517----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle TÜV/inspection acceptance Complete export processing Ljdpfjz D Ruzsx Afuert Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Vehicle recovery and transport ----YOUR VTS TEAM

Condition: like new (used), functionality: fully functional, machine/vehicle number: Sprinter Pritsche L3, mileage: 44,850 km, power: 110 kW (149.56 HP), first registration: 01/2022, fuel type: diesel, empty load weight: 2,257 kg, maximum load weight: 1,243 kg, overall weight: 3,500 kg, tire condition: 90 %, wheelbase: 4,325 mm, next inspection (TÜV): 09/2028, fuel: diesel, fuel consumption (combined): 9.6 l/100km, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,872 mm, total width: 2,099 mm, total height: 2,282 mm, permissible axle load (axle 1): 1,650 kg, permissible axle load (axle 2): 2,250 kg, loading space length: 4,300 mm, loading space width: 2,040 mm, loading space height: 400 mm, operation weight: 2,257 kg, number of previous owners: 1, chassis manufacturer: Mercedes, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, airbag, all-season tires, car registration, central locking, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, immobilizer system, navigation system, onboard computer, power assisted steering, power mirror, soot filter, start-stop system, tachograph, traction control, trailer coupling, truck registration, Sprinter pickup truck in top condition with only 44,000 km +++ Not a rental vehicle, not used for parcel delivery +++ Euro 6 emission standard - green environmental badge Engine: 2.2 CDI - 110 kW / 150 hp AD-BLUE technology ECO Start & Stop system Wheelbase L3: 4325 mm Rearview camera Rain sensor Fog lights Crosswind assist Automatic headlight control 3 seats in fabric - double passenger seat with storage compartment Driver's seat with adjustable height and armrest Airbag Digital radio (DAB) + USB MBUX multimedia system with 7-inch touchscreen Communication module (LTE) for digital services Lsdpfxsz A T Afe Afuert Apple CarPlay & Android Auto Bluetooth hands-free system Multi-function steering wheel, adjustable in height Central locking with remote control Electrically adjustable and heated exterior mirrors Electric windows ABS - Anti-lock braking system ESP - Electronic stability program ASR - Anti-slip control Brake assist with electronic brake force distribution Hill-start assist On-board computer Outside temperature display Tachograph Side marker lights Heat-reflecting glazing Storage compartment above the windshield Storage compartment on the dashboard 6-speed manual transmission Rear-wheel drive Full-size spare wheel Large rear window Ladder rack / rear wall protection Wooden cargo floor with lashing eyes for securing the load 2 lockable toolboxes on the side under the pickup bed Total vehicle length: 6872 mm Cargo area dimensions: 4.30 m long, 2.04 m wide, 0.40 m high Permissible total weight: 3500 kg Payload: 1243 kg Trailer hitch with 2000 kg towing capacity Trailer weight can be increased to 3500 kg Vehicle is fitted with new winter tires Complete service history, recent service MOT and emissions test new Clean German vehicle in good condition from first owner Truck net price: €29,900 Errors and omissions excepted. Subject to prior sale. We also offer affordable financing options and warranties of up to 24 months, also for commercial users.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser Lrsdezuzwdepfx Afuot • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) Lodpfoz Ebnhsx Afuert CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information Lsdpfxozgcife Afujrt The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center.