Used Roundness Measuring Instrument for sale (11,636)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest for motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is constructed, except for the computer, which is a newer, more modern HP model with a small form factor. Max. diameter 350 mm Max. test piece height 500 mm (higher values are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps for installation on another machine at your location. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight carrier. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Ndodozcqy Eepfx Afuob Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Errors can be made during assembly and commissioning. For example, some locking screws are installed for transport, and if you forget them, the system could be damaged when starting up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets Njdpfx Afszdz S Tjusdb - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, Tool measuring device Manufacturer: Mitutoyo Type: Quickset R Nsdpoddtuyofx Afuodb

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Nsdpfx Aeybbd Ssfuodb Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: good (used), Year of construction: 2015, Description: Nsdpoz A Ubcofx Afuodb The machine is in good technical condition, and can be tested upon prior arrangement. It can be used to measure SK 50 or SK40.

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Nodpfx Afei Dagksujdb Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Total height: 1675 mm

Year of construction: 2014, condition: new, digital length measuring device, manufacturer: Heidenhain, ID 355 533-04 Ndodpfx Afjb T Uqisusb Measuring scale, type LF 481 – Signal 1Vss – Measuring length 200mm.

Condition: used, Year of construction: 2019, Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. Ndodpfex R Dfxsx Afuob A USB key for exporting results. Documentation available

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) Ndedszimaajpfx Afujb - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, SLA5800 Biotech - MFC - Digitally controlled mass flow controller for gas, Mass Flow Controller elastomer-sealed mass flow controller, flow control, flow meter, flow controller, thermal mass flow BROOKS INSTRUMENT Type SLA585081BAB1A2S1 Ser. No. 01C00500222 Year of manufacture 2020 (new / unused in original packaging) SLA5800 Biotech series Option package Biotech Premium Packet Code T Mains connection 13.5 - 27 VDC (plug M8, 5 pin, male) Power consumption max. 10 watts Ndedpfouqgbysx Afuob PROFINET interface (2x RJ-45) Visual display 2 LEDs (NET / MOD) Gas connection 6 mm Swagelok Valve design Normally closed User gas O2 (oxygen) Active - Multiple / O2 (oxygen), N2 (nitrogen), CO2 (carbon dioxide), AIR (air) Calibration gas N2 (nitrogen) Flow control ranges (full scale) 20000 sccm (20 liters / minute) Maximum inlet pressure 4500 psi (300 bar) Normal operation Pressure differential 60 psig (4 bar) Control range 2% to 100% of full scale (range of mechanism) Typical accuracy from 20 to 100 % ± 0.9 % of set point for 20 to 100 % of full scale Typical accuracy from 2 to 20 % ± 0.18 % of full scale for 2 to 20 % of full scale Repeatability ± 0.2 % of the measured value Resolution 0.1 % of full scale Typical response time of the controller

Condition: ready for operation (used), Taylor Hobson Form Talysurf PGI 820 Measuring Instrument Measuring range: 8mm Njdpfxoz Dttte Afuodb Resolution: 3.2mm Motorized column: 450mm Feed unit: 200mm Roughness calculation Waviness calculation Contour measurement Accessories: Stylus Calibration standard Witte cross slide table Base table PC & software You are welcome to visit us for a viewing. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2013, Hommel Etamic Opticline C514 Waveform Measuring Instrument / Waveform Measuring Machine Year of manufacture: 2013 Measuring range, diameter: 0.2 - 140 mm Measuring range, length: 500 mm Workpiece diameter: 150 mm Workpiece length: 530 mm Workpiece weight: approx. 15 kg Resolution, diameter: 0.1 µm Nodpozz H Rijfx Afuodb Resolution, length: 0.1 µm Resolution, rotation: 0.018° Accuracy, diameter: (2 + D/100) µm Accuracy, length: (5 + L/100) µm Repeatability, diameter: 0.5 µm Repeatability, length: 3 µm Measuring speed: 10–80 mm/s Measuring rotation: 1 rev/s Positioning speed: 200 mm/s Typical measuring time: 3–30 s Dimensions of measuring system: 780 × 875 × 1,420 mm Weight: 1,850 N ≈ 185 kg You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Ndsdpfxszz Huus Afusb Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, LEICA BLK3D – Professional 3D Photogrammetric Distance Meter Selling a Leica BLK3D in perfect working condition – the leading photogrammetric measurement tool for professionals in the construction, surveying, and architecture industries. Description The BLK3D combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection functions, enabling image-based measurements with professional accuracy. (VERTICAL 3D) The device is equipped with 2 stereo photo lenses, allowing you to measure all elements appearing in the photo in 3D. (STTL) Each photo taken constitutes a complete set of measurements, including height, width, and depth. (Kuker-Ranken) Processing is done in real-time directly within the device (edge computing), without the need for a network connection or cloud services. (Tavco) Key Features Integrated photogrammetry: instrument combining a camera, advanced algorithms, and instant processing. Coupled with electronic distance measurement technology. Auto-targeting: visual recognition technology that allows you to select specific points for your measurements. Site documentation: measure inaccessible areas, create plans, estimate building installations, and document the progress of construction sites. Collaboration: share measurements with your colleagues via the BLK3D software (mobile or desktop version), export in JPG, or create PDF reports. Automatic geolocalization: each image is time-stamped and associated with the exact GPS coordinates of the capture location. (Kuker-Ranken) BIM/CAD integration: export in DWG/DXF for use in your CAD software, compatible with Autodesk BIM 360. (Kuker-Ranken) Technical Specifications Dimensions 180.6 × 77.6 × 27.1 mm Weight 480 g Tripod thread 1/4" (standard photo) Cameras 2 × 10 MP, 80° angle, 4 mm focal length Screen 5" IPS touchscreen, 720×1280 px Processor Snapdragon 820E Quadcore 2.35 GHz RAM 4 GB Internal storage 64 GB (~5,000 stereo photos) OS Android 7.1.2 Accuracy (good conditions) ±1 mm Accuracy (poor conditions) ±2 mm Maximum range 250 m (good conditions) / 120 m (poor) Battery 3,880 mAh – battery life ~4h Connectivity Bluetooth 4.1, Wi-Fi 802.11 b/g/n, GPS+GLONASS Ideal for: Architects, surveyors, quantity surveyors, site managers, building inspectors, engineering firms – any professional who needs to take measurements quickly on-site or during inspections. Sale includes: 1 BLK3D 1 Cable + charger 1 Battery 1 Microfiber cloth Nedpjzif Nasfx Afuedb International shipping possible at your expense. - Interested in this equipment? Contact me via PM for more details or to discuss your 3D digitization needs!

Condition: not inspected (used), Year of construction: 2020, functionality: unexamined, machine/vehicle number: 71193, measuring range X-axis: 3,000 mm, total width: 500 mm, total length: 1,000 mm, total height: 1,000 mm, overall weight: 30 kg, positioning accuracy: 0.045 mm, ● Availability: By arrangement ● Internal No.: ZM3 Technical data: Measuring volume: 3,000 mm Accuracy: 0.045 mm Scope of delivery: ● Includes laptop and software as shown in the images (completeness not guaranteed) ● Includes transport case Dimensions & weights: ● Installation dimensions (L x W x H): approx. 1,000 x 500 x 1,000 mm ● Weight: approx. 30 kg Additional notes: ►Upon request, we can offer transport to the desired location. ►The goods are sold with no warranty of any kind. Ndjdpfx Afsz A Tcfouob ►Technical data subject to change. ►The red base frame is not included in the scope of delivery.

Condition: used, Surface measuring instrument Mahr Perthometer S2 Used, as shown in the pictures From stock (may have storage marks) Please refer to the pictures for further technical information Scope of delivery as shown in the pictures With invoice The invoice will be enclosed with the shipment. Payment method Bank transfer Self-collection Ndsdpjzkl Dyjfx Afujb Information about bank details, payment terms, etc. will be sent to you by email. W120

Condition: used, Technical details: x-axis: 1000 mm z-axis: 600 mm diameter: - mm measuring range Y-axis: 972 mm interface: RS-232 tool taper: - weight: 40 kg power consumption: 100 Watt Floor Space WxD: 1,2 x 0,8 m Mitutoyo Linear Height 600 Height Gauge with Wenzel Precision Granite Surface Plate (Optional) The granite surface plate is not included in the sale but can be purchased separately. For sale is a high-quality Mitutoyo Linear Height 600 digital height gauge, designed for accurate 2D measurement tasks in quality control, toolmaking, manufacturing and inspection departments. Mitutoyo Linear Height 600 ·Precision digital height measuring instrument ·Measuring range: 600 mm ·RS232 data output ·Made in Japan ·High accuracy and repeatability ·Ideal for quality assurance and manufacturing environments Measurement Capabilities ·Height measurements ·Internal and external dimensions ·Hole center distances ·Center point determination ·Step measurements ·Diameter measurements ·2D measurement applications ·Angle measurements (with optional accessories) Optional: Wenzel Precision Granite Surface Plate ·Size: 1000 × 630 mm ·Manufacturer: Wenzel Precision ·Inspection date: 07.11.1989 ·Permissible flatness deviation: 0.008 mm ·Measured flatness deviation: 0.005 mm ·Weight: approx. 280 kg Ndjdpfxszbqypj Afueb An excellent solution for toolrooms, quality control laboratories, precision engineering and manufacturing facilities. *

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 200101521101, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, year of last overhaul: 2026, Equipment: type plate available, For sale is a ZEISS CONTURA 7/10/6 coordinate measuring machine (CMM) with a ZEISS VAST XT gold scanning probe system and a C99 control panel. The machine is located in Velbert (North Rhine-Westphalia) and was last calibrated in February 2026. Nodpoz Duv Aefx Afuedb Manufacturer: Zeiss Model: SYS CONTURA 7/10/6 Part number: 623564.9010.000 Serial number: 200101521101 Year of manufacture: 01/2001 Automatic probe changer, 5 positions Measuring software: ZEISS CALYPSO 2021, version 7.2.08 Last major maintenance including calibration: 02/2026, performed by Zeiss Condition: used / operational Machine type: Coordinate measuring machine AVAILABLE FROM JANUARY 2027 Disassembly and transport are to be arranged by the buyer. If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2011, functionality: fully functional, Auriga 60 Computer-Controlled FE-SEM with patented GEMINI® electron optics and field emission cathode, designed for analytical applications and high-resolution imaging under high-vacuum conditions. Year of manufacture: 2011 FIB column type: Cobra FIB column SEM column type: Schottky field emitter Installed detectors: • SESI (commercial) • InLens Nsdszz H I Iopfx Afujdb • ESB • 4QBS (pneumatic) • STEM (pneumatic) • EDX X-MAX 80 mm (Oxford) • EBSD (HKL Channel 5) • Charge compensation Gas injection system: Platinum Maintenance report: The system has been serviced annually, with a service report provided each time. Operating hours: 13,290.33 hours (with current filament) PC and software included: Yes Included components: All pumps, cooling systems, and control units are included, except for the dampers. Software Version: • SEM: SmartSEM Version 6.00 (June 9, 2016) • EDX: INCA software package – Version 5.03 Price: Negotiable price excluding VAT and delivery

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Nodpjz Dw Emefx Afuedb Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, ZEISS GOM ATOS Q Professional 8M – 8M 3D Scanner + MV170/MV350 + ROT350 – Like New _____ For sale is a GOM ATOS Q Professional 8M optical 3D measuring and scanning system, purchased new in 2021. Complete system includes: • GOM ATOS Q Professional 8M 3D scanner • 8 MP camera system • MV170 measuring volume • MV350 measuring volume • GOM ROT 350 rotary table • Calibration equipment and calibration panel • Original GOM mobile stand with adjustable sensor arm • GOM software with license dongle • System backup • Original GOM documentation and manuals • Original calibration / acceptance documentation • Connection cables and accessories shown in the pictures  The system can be inspected and demonstrated in operation by appointment. The system is in excellent, like-new condition and has seen extremely little use. It was used only a few times for the dimensional inspection of small precision medical plates/components. The system was purchased new and has remained in a professional quality-control environment at a high-precision CNC manufacturing company. The ATOS Q is a professional optical 3D measuring system designed for high-precision dimensional inspection, quality control, CAD comparison, first article inspection and reverse engineering. Due to its extremely limited use, the complete system is in excellent condition and is practically like new. • Year: 2021 • Condition: Extremely low usage - like new – used only a few times for dimensional inspection of small precision components. • Location: Trnovec Bartolovecki, 42202, Croatia • Availability: Immediately • Price: price on request Additional photographs, documentation and technical information are available upon request. Original purchase documentation is available. Manufacturer: GOM GmbH / ZEISS Model: ATOS Q Professional 8M Type: Industrial optical 3D measuring / scanning system Ndjdpfx Afez D E Ensuob

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Almost unused professional 3D scanner. Nodpfx Afez Ep I Asujdb

Condition: used, Year of construction: 2010, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, We offer this used Werth Easyscope 300x200x200/VID/TP 3D CNC coordinate measuring machine, manufactured in 2010. Type: Easyscope 300x200x200/VID/TP 3D CNC Year of manufacture: 2010 Voltage: 230 V AC Current: max. 10 A Frequency: 50 Hz Serial number: 10-00012 Measuring range as indicated: 300 × 200 × 200 mm Control: CNC Measurement: 3D System: vision system + measuring probe Measuring table: glass Manual control: panel with joystick Connectors visible on the device: Video / Motor / Scale / Probe Safety / emergency switch Control computer visible in the pictures The machine can be used in quality control, tool rooms, metrology departments, measuring laboratories, and for the inspection of precision manufactured parts. Inspection of the device is possible by prior arrangement. The device has been used sparingly and has not been calibrated since 2029. If you have any questions or require further information, please send a message or contact us by phone. Nsdpfxsz Ditve Afujdb

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200008301032, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 280 kg, total height: 2,000 mm, total width: 1,100 mm, total length: 1,100 mm, overall weight: 500 kg, table width: 680 mm, table length: 855 mm, CARL ZEISS VISTA 1620-14 coordinate measuring machine Attention: The item must be collected on a date to be determined between October 7th and October 14th, 2026. The date will be finalized. Ndjdpfx Aozlg I Aofuob FCA D-35576 Wetzlar – loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7x-1245., overall weight: 10 kg, Equipment: documentation/manual, type plate available, Proliner 7x device, serial number 7x-1245. Condition: used, like new, complete set. Year of manufacture: November 2023. 1 owner. The device was used for measuring glass wall cladding. Includes tripod, template attachments, backpack, remote control, wheels for moving the device, 2 batteries, and a charger. Net price negotiable, call 795503436. Ndodpfx Afoz D Abtjueb