Used Homag Table for sale (477)

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Gsdpfxoyqybuj Aggjip Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Gedpfx Agoyqx U Hjgoip Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Gijdpfx Agex A Hfvjgsp Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Gedpfx Aex A Tdloggsip Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Giodpfjxmgybjx Aggep Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Giodpfjxn Nfvjx Aggep Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 008339, Max. panel width: 3800 mm Max. panel length: 1600 mm Main saw blade projection: 95 mm Gisdsx Nm S Sepfx Aggjp No of Grippers: 6

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Gsdpfx Agoypm Hhogjip Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz Giodsypm Dgepfx Aggep

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Gisdpeypm Avsfx Aggop Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces Gisdpeytf Irsfx Aggsp • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes Godpfxeyrp Uae Aggsip - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - - Type/Brand: Nordson - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Rough milling unit - └ 5th unit type: Cap unit - └ 6th unit type: Fine milling unit - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Gsdpfx Agsyrpvwogsip

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, input voltage: 415 V, Equipment: CE marking, documentation/manual, Homag BHX 055 Cnc router boring machine centre Giedpfeytfkmox Aggjp

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Gsdpfx Aeyt Izbjggsip Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Gjdpjytr Hbofx Aggoip Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Gjdpfsyttf Sox Aggsip Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety guard The machine is sold and delivered in its actual technical and legal condition ('as seen and approved'), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Gijdpfxoyttcws Aggjp Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of traverse supports with suction: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling (X-direction): 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of tool positions: 18 Tool magazine 2 Number of tool positions: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial descriptions of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7350

Condition: ready for operation (used), Year of construction: 2006, This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Gsdpfex U Uzrsx Aggjip Additional equipment • Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW • PUR Nordson Melting Station / Tool Set / Suction Tube Machine Benefits Technical Machine Benefits • Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm • Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing • Minimum workpiece gap: 500 mm

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. • Condition: Used Additional equipment Gjdpfsyhqi Djx Aggoip • BARBARIC workpiece return system

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, number of axes: 3, total height: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Gijdpoyap S Iefx Aggsp Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Year of construction: 2019, condition: ready for operation (used), spindle speed (max.): 8,000 rpm, This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine. • Workpiece width after processing: 10–250 mm • Workpiece height after processing: 10–160 mm • Control: PowerControl with powerTouch LPP300 • Feed table length: 2,500 mm • Feed speed: 6–24 m/minSpindles: • First lower spindle: • Motor power: 7.5 kW (Siemens IE3) • Speed: 6,000 rpm • Spindle diameter: 40 mm • Spindle length: 281 mm • First right spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First left spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 176 mm • First upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm • Second upper spindle: • Motor power: 7.5 kW, speed continuously adjustable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Second lower spindle: Gjdpeygvnpsfx Aggeip • Motor power: 7.5 kW, speed infinitely variable (Siemens IE3) • Speed range: 4,000–8,000 rpm • Spindle diameter: 40 mm • Spindle length: 266 mm

Condition: ready for operation (used), Year of construction: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from to mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine. • Edge thickness: mm Gijdpfxex Enkbe Aggop • Roller diameter max.: 3 x 45 mm or 0.8 x 65 mm • Workpiece thickness: 8 - 60 mm • Variable feed rate: 20 m/min • Electrical connection: 400 V - 3 Ph. - 50 Hz • Pneumatic connection: 6 bar • Swiveling control panel at the machine inlet • Durable short-stroke membrane keypad • Color graphic flat screen • Industrial PC with CompactFlash disk for mass storage • Aggregate function keys with LED status indicator • Operator guidance via color pictograms • Online language switching between various foreign languages • Overall length: 7360 mm • The control system had a boot and lost your stored data. In 2014, the machine had 1,911 hours. In 2016, the machine had 2,642 machine had an average running time of 300-350 hours per year. This means that the current total number of hours is approximately 5,900 hours.

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. Giodpfxjychduj Aggjp • Configuration/Features: • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment • Workpiece returning system: LIGMATECH

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 380 mm, number of axes: 5, This 5-axis HOMAG PROFI BOF 722/58/18/F/K was manufactured in 2005, featuring a machining range of X = 6000 mm, Y = 1800 mm, and Z = 380 mm. It includes a 5-axis fork head replaced in 2019 and two traveling plate changers with 18 slots each. Ideal for advanced woodworking, consider the opportunity to buy this HOMAG PROFI BOF 722/58/18/F/K CNC processing center. Contact us for more information about this machine. Gijdpfxjx D Hxfo Aggop • 5-axis fork head (replaced in 2019) • Rear spindle with Flex5 unit • 2 traveling plate changers, 18 slots each • Second vacuum pump, switchable individually Additional equipment • Computer with Windows 10 (new ~1.5 years ago) • WoodWOP 8.1 software