Used Cutting machinery for sale (74)

Condition: good (used), POLAR 115 EM Fgedpfsxg Dr Uox Aftoh

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Fodju Tg Spjpfx Aftegh Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: like new (used), Year of construction: 2015, Reel width: 2000 mm Slitting width 300 – 1700 mm Max unwind diameter: 800 mm Max. rewind diameter: 600 mm Slitting method: Razor Rewind shafts: Dual rewinding shafts Fjdpfxowvv Hfj Aftogh Max mechanical speed: 400 m/min AC Servo motor with tension control Web guiding Material types BOPP, PET, PE, laminated film, foil, paper

Condition: good (used), Year of construction: 1967, functionality: fully functional, Max. jumbo reel width: 1400 mm Min. jumbo reel width: 480 mm Fgsdoxlizfjpfx Aftsh Max. jumbo reel diameter: 1600 mm Expanding chucks diameter: 150 mm and 300 mm Speed: 160 m/min Max. stacking height: 250 cm With integrated sheet counter Paper grammage: 100 to 600 g/m² Production format: Length x Width Min.: 450 x 480 mm Max.: 1940 x 1400 mm Upper cutting station by Dienes Werke Year of manufacture: 2007 Partial overhaul carried out in 2003 Electronics upgraded in 2004 Upper cutting unit by Dienes Werke installed in 2007 Unwinding stand overhauled in 2009 Machine can be demonstrated.

Year of construction: 2017, condition: used, functionality: fully functional, Fully automatic core cutter including core magazine The machine is for sale due to replacement with a new model. It remains operational and installed, and can be inspected and demonstrated by appointment. Technical data: • Machine type: Fully automatic core cutter with magazine • Model: AKG–2000 • Purpose: Cutting cardboard cores • Core inner diameter: 30–152 mm • Max. core wall thickness: 12 mm • Min. core wall thickness: 2 mm • Max. core length (loading length): 2000 mm • Min. core length: 1000 mm • Max. cutting length: 1200 mm • Min. cutting length: 12 mm • Min. remaining core length: 50 mm • Number of cutting blades: 1 • Power supply: 3x400 V / 50 Hz / EU plug / 4 kW • Compressed air supply: 6–8 bar • Core magazine capacity: 20 cores, each 76.2 mm • Control panel size (HMI): 4'' touch screen • Drive: Bosch Rexroth (4-axis servo) • Certification: CE Machine operation: The automatic core cutter allows your cardboard cores to be cut while the operator attends to other tasks. The core length, dimension, and quantity to be cut are entered via the control panel. The core magazine is then loaded with 2 m long cores and, with the push of the start button, the machine processes the job automatically, without the need for operator intervention or supervision. This significantly reduces the variety of cores needed in inventory, saving on storage capacity and costs. Fgjdpfxjxgh Srs Aftjh Our automatic core cutter features a Bosch Rexroth 4-axis servo drive, addressing all requirements of small to medium-sized businesses with minimal investment. Custom software requirements can be accommodated. Production jobs can be entered either manually via the control panel or via USB stick. Jobs can be saved and recalled as needed. For optimal service, the machine is equipped with an Ethernet port for diagnostics and rapid troubleshooting. A set of core adapters is included with the machine; additional adapter sizes are available upon request. The corresponding settings for core diameter changes must be carried out by the machine operator. Available adapters for core inner diameters: 30 / 50 / 70 / 76 / 150 / 152 mm

Year of construction: 2018, condition: excellent (used), Refurbished Optima V160 Cutting Table for Sale New felt and oscillating blades included. Price: €10,000 The Optima series offers the perfect solution for those considering expanding their portfolio with a flatbed cutting machine. It’s the best value choice for printing and packaging industry businesses or display manufacturers struggling to keep up with post-processing tasks manually. Equipped with a dual-head module, the Optima cutting machines allow for lightning-fast tool changes, enabling processes such as cutting and creasing corrugated packaging in a single run. It is also ideal for cutting and perforating or creating straight and angled cuts in display manufacturing in one workflow. Fodpfjvmg Dqex Aftogh With its versatile tools and accessories, it stands out among competitors, handling virtually any material used in the printing and packaging industries. As with all Valiani machines, the Optima series is characterized by excellent quality and cutting precision, regardless of the material being processed. It offers low maintenance and production costs, suitable for prototype production or small and medium series. For rigid materials used in advertising and decoration, it is much more cost-effective compared to manual labor. Thanks to its user-friendly design, operators can start using the machine after just a few hours of training, unlike competitor models. Its vacuum table and push-button material holding system ensure that materials remain firmly in place during processing. Our Hungarian service partner is available for further servicing and spare parts procurement. For more information, please feel free to contact me.

Year of construction: 1985, condition: ready for operation (used), Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible. Fgedpfx Aswt Dbljfteh

Year of construction: 2000, condition: used, PLATEN 120X170 year 2000 CE ZENARI prefeeder year 2000 CE Fgsdpfx Aexgpvfsfteh

Year of construction: 2012, condition: used, Web width: 520 mm Voltage: 400 V + IV + PE Fedpfexl Trusx Aftjgh Current: 20A Control voltage: 24 V DC Air pressure: 6 bar

Condition: excellent (used), Offer consisting of: Polar 78N eco, year of manufacture 2016, incl. side air tables (75x75cm and 50x50cm), immediately available. Fgjdew Am Dhspfx Aftoh

Condition: new, Year of construction: 2025, functionality: fully functional, cutting width (max.): 1,600 mm, insertion height: 50 mm, cutting length (max.): 2,500 mm, input current: 30 A, input voltage: 400 V, Equipment: documentation/manual, Akonda.pl - Your Official iEcho Partner. We offer the highly versatile and powerful iEcho TK4S, the ultimate solution for automated cutting across multiple industries. Its modular design allows for perfect customization to meet your specific production needs, from sign & display and printing to packaging, textile, and industrial manufacturing. Fjdjxfrh Ujpfx Aftegh The iEcho TK4S is engineered for precision, speed, and reliability. Its robust construction and advanced features ensure high-quality results on a vast range of materials. As an official iEcho service partner, Akonda.pl provides comprehensive support, including professional installation, operator training, and ongoing technical service to keep your operations running smoothly. Key Features of the iEcho TK4S: Modular Tool Head: Can be equipped with up to three tool modules simultaneously, allowing for complex jobs without stopping. A wide range of tools is available: - Electric Oscillating Tool (EOT): Perfect for cutting soft and medium-density materials. - Pneumatic Oscillating Tool (POT): An air-driven tool with an 8mm stroke for cutting hard, dense materials up to 110mm thick. - Universal Cutting Tool (UCT): For high-speed through-cutting of materials up to 5mm. - Creasing Tool (CTT): Delivers perfect creases on cardboard and corrugated materials. - High-Speed Router (RZ): With a speed of up to 60,000 RPM, it can mill and engrave hard materials like acrylic and PVC. High Performance: Maximum cutting speed of 1500 mm/s and an accuracy of ±0.1mm. Durable Construction: Built with a lightweight and strong aviation aluminum frame. Automation Ready: Can be equipped with automatic feeding and collecting systems for 24/7 production. Intelligent Camera System: Ensures precise positioning and accurate contour cutting for printed jobs. Available from Stock & Full Service Support! At Akonda.pl, we understand the importance of fast delivery and reliable support. IN STOCK NOW: We have a permanent stock of iEcho TK4S machines in the popular 2500 x 1600 mm size, ready for immediate delivery. OTHER SIZES AVAILABLE: Looking for a different dimension? Contact us to inquire about other available sizes and custom configurations. We can supply the full range of iEcho models. PROFESSIONAL SERVICE: Our team of factory-trained technicians provides expert installation, training, and warranty/post-warranty service across Europe. Why Choose Akonda.pl? Authorized iEcho Service Partner: We are your direct link to professional support and genuine spare parts. Largest iEcho Warehouse in Europe: Minimizing lead times and ensuring you get your machine faster. Proven Expertise: We have extensive experience in implementing cutting solutions for a wide variety of industrial applications. Contact us today to receive a customized offer, schedule a demonstration, or discuss how the iEcho TK4S can revolutionize your production.

Year of construction: 2019, condition: new, The machine was only used for testing – it is practically new. Fsdpfx Afoxduzbjtegh The PLS 2200 saw was designed for cutting rolls of paper, laminate, and CPL. The machine’s parameters allow cutting rolls up to 2200 mm long, and loading into the machine is assisted by a pneumatic extension of the lower rollers. The side support roller ensures high cutting quality. Technical data: Materials that can be cut: paper, laminate, CP, and foils suitable for cutting with a saw blade Maximum roll diameter: 600 mm Maximum roll length: 2200 mm Minimum cutting width: 20 mm Saw blade thickness: 5 mm Saw blade rotational speed: 1500 rpm Total power: 5 kW Machine weight: 900 kg.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, The Eagle™ C125 conveyor system has supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled material goods with consistent speed and control. Eastman’s gantry and tool-head design are engineered to cut the most diverse technical and industrial fabrics available, while exceeding industry standards for accuracy. The robust conveyor design delivers unrivaled levels of material utilization and is often capable of cutting multiple layers without plastic overlay*. This computer-controlled cutting system requires minimal operator guidance to Fjdpfow Dzczex Aftjgh automatically feed and spread material to the identified start position. Smooth and accurate cutting of long markers is accomplished with the support of a powerful, yet quiet and self-contained vacuum system Cutting Surface The cutting surface is a smooth and durable, high-durometer cast urethane conveyor belt suitable for even sticky or downy materials. It has proven reliable for 2,000+ hours of normal operation, with some customers testifying to more than four years of continuous use. Material Hold-Down The C125 is equipped with a self-contained, high-flow vacuum system to ensure optimum material hold-down for cutting. Millions of holes are perforated in a random pattern that provides evenly dispersed vacuum flow, no matter where you are cutting. The piece removal zone is integrated into the design, eliminating the need for extension tabling.

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, cutting speed: 500,000 mm/min, roller width: 520 mm, No reserve price – guaranteed sale to the highest bidder! Machine operational as shown in the video! Small format cutter, cross cutter and cut-size sheeter TECHNICAL DETAILS Fgjdexcxx Uspfx Aftjh Unwinding - 2x shaftless roll stands - Maximum unwind diameter: 1,200 mm - Core diameter: 70 mm - Maximum roll width: 520 mm - Paper grammage: 60 – 170 g/m² Cutting Unit - Number of knives: 3 - Cross cut formats: DIN A4, upgradable to DIN A3 - Maximum cutting speed: 500 m/min - Operating speed: approx. 250 m/min with 80 g/m² paper - Maximum cutting frequency: 1,700 cycles/min - Cutting tolerance: ±0.15 mm - Maximum sheets per minute: 1,000 PROCESS - Unwinding - Cutting unit with 3 knives - Cross cutter for DIN A4 - Overlapping - Counting and stacking of sheets - Transfer to the right in running direction - Output of finished packs, e.g., 500-sheet reams

Condition: used, Year of construction: 2002, KAMPF Slitting and Winding Technology Model: Conslit 17 Fgsdexgr R Eopfx Aftjh Year of manufacture: 2002 Web width: from 500 to 1750 mm 2x web side guides / 2 edge position control systems Friction and air shafts: 70, 76, 152 mm

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. The machine is used and is sold without warranty. Inspection is possible and welcome. Fgsdpfx Ajv Radxjftoh Loading facilities available.

Condition: used, Year of construction: 1994, For processing blank paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Formats: A3, A4 Maximum web width: 500 mm Minimum web width: 250 mm Paper grammages: 60 g/m² - 170 g/m² Maximum delivery belt stacking height: 100 mm Control system: Siemens Simatic S5 Technical specifications as per user (without guarantee) Fgsdpfxsw R Uqds Aftsh

Condition: new, - Motor power 7.5 kW - Cutting force 25 tons Cutting channel designed for: - Max. roll length 1500 mm Fedjd Tfzdopfx Aftsgh - Max. roll diameter 800 mm - Machine weight approx. 3000 kg - Tank capacity approx. 110 liters - Hand guard grille in the control panel area and opposite - Straight version of splitting table - Documentation in German (2x: 1x in text form, 1x on CD) - Colour scheme RAL 5012 – light blue Protective grille/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information upon request.

Year of construction: 1993, condition: used, functionality: fully functional, machine/vehicle number: 8839, Rewinding machine for surface-sensitive materials such as papers between 30 and 300 g/m², films, etc. Working width max. 1800 mm, 2 rewinding stations for cores with 50 mm diameter. Attention: the second (rear) unwind visible in the video is not for sale, only the shaftless (front) unwind. For further details see attached PDF file. Fodpfettg E Iox Aftsgh

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 6741108, cutting width (max.): 1,370 mm, Size 137 cm, Program, Spare knife, Excellent condition Machine no.: 6741108 Fgsdpfow Inyyox Afteh

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): Fgedsxbyf Hepfx Aftsh • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Year of construction: 2020, condition: like new (used), functionality: fully functional, Sizing machine from roll for products such as Döner boxes, carton cups, soup bowls, carry bags, etc. Fedpfx Afexd Uxgstsgh

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 11508, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: Flexa, roller length: 1,650 mm, working width: 1,650 mm, overall weight: 370 kg, power: 1.5 kW (2.04 HP), input voltage: 230 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, documentation/manual, emergency stop, The Flexa Miura Plus is a professional automatic XY cutter designed for trimming paper, vinyl, wallpaper, foils, banners, and other roll-fed media up to 1650 mm wide. The machine is PLC-controlled with a touchscreen interface, offering fast setup and precise cutting for industrial and print finishing environments. This unit has been upgraded with 5 sensors, allowing operators to configure settings for five different substrates and switch between them quickly without lengthy adjustments. Powered by an electric drive system, it ensures smooth handling, reliable operation, and consistent results. The Miura Plus is also ideal for cutting two parallel tiles simultaneously, making it a perfect fit for poster, wallpaper production and large-format finishing. Fjdpfexbfztsx Aftjgh We will also include 16 spare blades free of charge. Located in Riga, Latvia, the Miura Plus is a robust and efficient solution for businesses looking to increase productivity and versatility in their finishing workflow.

Year of construction: 1972, condition: used, Sheet Paper Cutting Machine – Strachan & Henshaw (UK) High-quality industrial machine, manufactured in the United Kingdom, designed for cutting paper rolls into sheets with precise dimensions. Its robust construction and proven reliability make this machine a practical solution for print shops, packaging factories, and other applications in the paper industry. 🔹 Main features: Automatic cutting of paper rolls into sheets; High dimensional accuracy; Operating speed suitable for industrial production; Solid construction, suited for intensive use; Easy maintenance and low operating costs. This 1972 Strachan & Henshaw machine is still operational and represents a reliable and economical choice for producers seeking a durable and efficient unit. Fodexcxpgopfx Aftogh

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 7141440, Size 137 cm, chromed air table, program, spare knife Machine no.: 7141440 Fgsdpfx Aow Inymoftjh