Used Homag for sale (490)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Lrodpfjyw Ndmjx Agvon Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Lodpoyywcvofx Agvorn Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Lrodpfx Aoyyvttjgvsn WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Spraying unit (Anti-sticking liquid) Lrjdpfx Ageyyvp Ujven In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 80 Edges thickness in stips / lippings (min/max) mm 0,4 / 20 Numerical Control NC21 Ljdpfjl Iz Tuex Agvorn Feeding speed m/min 18 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (Hot Melt Glue + Quick Melt system) A20 + A34 Band Pressure zone "C" Edge coils supporting unit (No. 1 reel) Snipping (end-cutting) WK 14 (KW 0.8x2 motors at RPM 12000), pneum. adjust. chamfer/straight Rough Trimming unit Optimat (2 x Kw 1,5) Fine Trimming unit MF20 (2 x kw 0,55) Corners Rounding (contour trimming) Unit FF12 (4 x Kw 0,4) CNC (WD40) Free space for Profile Scraping unit Finish processing unit ( Glue scraper + Buffing unit) FA 10

Condition: excellent (used), PANELS RETURN SYSTEM for EDGE BANDER (LEFT SIDE) Ledpogz Atbofx Agvjrn To combine with a single-side Edge Bander allowing the operator (worker) to always stay at the in-feed side of the machine (the processed workpiece will automatically return-back to him). Roller translator table with belts - 180°: 2600 mm x 1800 mm 1° Conveyor (motorized carpet) (mm) 7000 x 900 2° Conveyor (motorized carpet) (mm) 2500 x 850 Mod. BOOMERANG BONSAI

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Ljdpfod Nvi Dex Agvorn Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Lrodpogwbbqjfx Agvsn Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense Ljdpfx Aod Siydsgvjrn (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Lrsdpfx Ajdg Itnjgvon Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: excellent (used), LINE of Double-side SIZING-SQUARING and EDGE BANDING, max working width mm 2500 Composed of the following machines: Lrjdpfxodg Itmj Agvjn U06051) Motorized rollers Table "HOMAG" Mod. TBL 100/25/12/S to infeed workpieces/panels U06052) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. Profi KFL 525/8/A3/15 U06053) In-feeding Rollerway "HOMAG" Mod. Profi TDL 310/25/12 with 90° Turning device (from lenghtwise direction to crosswise direction) with double cone system U06054) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. Profi KFL 526/9/A3/25

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° Ledpfofd Ilysx Agvern OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control Power Control 22 Feeding speed m/min 18 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) QA 34 + PU 34 Band Pressure zone (N.C. adjustment) "A" Lsdpfx Aed Nt Nqsgvjrn Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Pneu (2 pos.) Rough Trimming unit Optimat (2 x Kw 0,55) Multi Function Unit (Profile contour Trimming unit) FK 13 (2 x Kw 0,4) CNC (revolver 8+8 pos.) Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit ( Glue scraper + Buffing unit) FA 11 (Pneu) OPTIONAL: Panels Return System "LIGMATECH" Mod. ZHR 05/L/075 (SOFIT code Z02007)

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) Lredpfx Agodz Uk Tjvon No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 Lrodpjdt Rgvefx Agvon VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) Lrjdocr U Urepfx Agvsn SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" Ljdpfxsh T Dvto Agvern KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control PC85 - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 10 Support rails (lenght mm 1500) LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Ledpjr Ai Sqefx Agvorn Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 folds) + (No. 3 folds) Max. useful working area (X - Y - Z) mm 6000 x max mm 1600 x mm 125 No. 4 Working areas - 2 x Vacuum pump (capacity m3/h) Separate electric and command cabinet Total installed power (Kw) 27,5 (ca.) WORKING GROUPS (TOP): No. 21 Independent vertical boring spindles (High Speed 7500) No. 10 Independent horizontal boring spindles (No.6 in X-axe + No. 4 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. Vertical electro-spindle: HSK63 Vertical electro-spindles motor power KW 9

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) Lrsdpfx Ajx Aqi Esgvjn N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: excellent (used), PANEL BEAM SAW WITH REAR LIFTING TABLE Numerical Control Power Concept Software CADmatic 4 Professional Lifting scissor table (mm) 4300 x 2200 No. 2 Rear pushers (TWIN PUSHER) Mod. POWER CONCEPT With clamps / grippers RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 95 (automatic) Scoring Unit (max saw diameter / power) 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) 380 / Kw 13,5 (Max 18) Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 28 OPTION: Lrjdeimr Icspfx Agvjn - Software Cut Rite (optimizzazione/optimisation) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Labels Printer (Option) - Software LABELING PACK BR 3/4/5 (etichette/labels)

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Ledpfsx Aqdcjx Agvsrn No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Ledslkdpmepfx Agvern Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Lrodott Iudspfx Agvon Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional N° 1 Infeed roller tracks (ca.) 18,000 mm + (OPTIONAL: Infeeder with chains) Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° Lrodpfx Agef Nkv Sovjn 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 ( Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min 2° Rear-pusher, with No. 7 (+1) clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 170 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 570 (Kw 30) Adjustable speed of the saw carriage (QS) (m/min) 1 - 150 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels (N° 2 roller conveyors) Typ 68/20 and Typ 58/24 + N° 3 tables with motorised belts: 2 x Typ 255/56/2 and 1 x Typ 27/56) Total power Kw 110 ca.

Condition: excellent (used), AUTOMATIC MULTI-BORER "WEEKE" In line with another machine possible Ljdpfjh Ryhnjx Agvorn Numerical Control Power Control Software WoodWop (TOPDRILL BST 500) Through-feed motorized transport belts (No.) 2 (with adjustable speed) Horizontal units/supports (No.) 2 Drilling heads/Blocks for each horizontal unit (No.) 2 Spindles for each horizontal drilling head (No.) 11 Max. working width (mm) 3000 Min. working width (mm) 250 Bottom vertical units/supports (No.) 6 Drilling heads/blocks for each bottom vertical unit (No.) 2 Spindles for each drill head of the bottom vertical supports (No.) Various Top vertical units/supports (No.) 2 Drilling heads/block for each top vertical unit (No.) 2 Spindles for each drill head of the top vertical supports (No.) Vertical top pressure clamps (No.) 6 Transport belt to evacute chips (wastes) Quota (axes) digital display Total installed power (Kw) 26