Round timber plant for sale
Identified location: Ashburn (US) (Edit)
Log sorting line with 60 Pcs sorting bins and Rema Sawco AB 3D scener.
Betfw979wl
Min. log diameter 100 mm.
Max. log diameter 650 mm.
sorting speed 120m/min. more
complete roundwood place log feeder log pull cross-cut station boarding machine BAR GAR passage 900mm measurement 3d sorting 6 boxes
Hym0rmz more
2007
ready for operation (used)
CARDAN SHAFT RL 0483 LZ 1060
ROTOR CYLINDER VK FP 0109
CYLINDER VK FA- 1301
14 pcs. KNIFE new
Hmu7q0nyq
1 ROTORARM USED OVERHAULED
1 ROTORARM NEW
WORN ROTOR CYLINDER
2 X AIR DUCT
EURO 1,100 + VAT. more
Still working condition, new chains 2 years ago, metal detector MD 500, 42 pockets, without log scanner.
Bmaw97jg3a more
Year of construction: 2012
Nq7yedav
Operating hours: approx. 24.000
track width: 2,80m
Cabin : left
Crane body: behind the cabin
Crane: OBX IV with central lubrication, outreach 13,3m
Chop saw: ALPHA, sword 1,3m
Four wheel drive
with container
incl. cut-to-length pole 24m
incl. trailer
Two-level measurement and automatic marking
Available from January 2021
!! Sales in sales order !! more
year of construction 1991 - rebuilt with new machines and new measurement
2014 for long logs and sections. Jörg 3 D measurement. 2014.
- RH Task split with step slider.
- debarking ER 90. circular saw cut and crosscut with sword saw.
- Victory device
- Overall control 2014 from Alfha
Furkfpxz
- Sorting block train with 20 boxes.
- Root reducer,
Log sorting crane with OBX 4 2009 with 15.50 m jib.
Complete plant still in operation to be inspected more
Harvester Hemek Tigercat H 16
3-axle, Scania engine
approx. 10.000 operating hours
all documentation available
slightly in need of repair small cable fire
Please also visit my other advertisements.
Bk9kjx30cc
I look forward to your inquiry. more
1994
good (used)
Factory overhaul: 2009 at the B&Z factory in Altshausen (13500 hours)
track: 3,00 m
Cabin: left
0xjdjbx2
Crane body: in front of the cabin
Crane type: OBX II with central lubrication 15,20 mtr. outreach
Crosscut saw: ES 122 left side
Sawdust container
Single-part machine
4 x rollers for support rails
Cut-to-length poles 25 meters
Machine can be viewed in operation until May 2021
Not included in the offer:
grabs, cables, trailers, substructure crosscut pads and tapered rollers, track more
Logyard with large feeding table, for 3 truck loads,
Separation, root reducer Hombak, transfer to measurement, Jörg, calibratable, curvature detection. Stihl chain crosscut saw for clean cut, insertion into crosscut line with stop carriage, labelling, insertion into sorting line with 30 boxes.
Easy to dismantle with gantry crane over the whole area.
Price 150 000.-- + VAT
Bl80t0snvn more
Heavily made small log sortingline by Tähkä Oy
- The 34 pockets (17x2)
- Hydraulics/electronics
- Metal detector
- 3D Log scanner
Fojuux92
- Log table more
HÄWA Root reducer- NEW - Direct from the manufacturer
Machine specification
Wood type: Hardwood and softwood
Diameter: 0.20 to 1.00 m (run-up to 1.20 m)
Log lengths: 2.00 to 5.00 m (longer lengths also possible)
Total weight: 5t
Total connection: 45kW (milling shaft 37kW)
with HBC radio remote control (Start/Stop)
Including hydraulic power unit
Fobxxpta8
If you are interested in a consultation, please contact us. more
Forwarder Hemek F 14 ph
Bk9ki2jjf9
4-axle, Scania engine
Loglift Crane
with horizontal cabin control
approx. 15.000 working hours
all documentation available
Please also visit my other advertisements.
I look forward to your inquiry. more
- Hydraulic kickers
- 42 pockets
Oavn2
- 100m/minutes speed
- metal detector
- Chains have been renovated
2 years ago
- Really nice maintenance history and in good condition more
1100 025 Round timber sorting wagon Baljer & Zembrod type Futura 80,
B7kkg28y
Track width: 2.60 m,
Crane: Jonsered's Log Jon 125 SR,
incl. chop saw Stihl in front of the cabin,
For self dismantling and self collection. more
We sell our round timber sorting car of the company Baljer & Zembrod.
The machine is still in use until October 2020 and will then be dismantled.
Cnt2s9ro
So it is fully functional and can be inspected at any time during operation!
The offer includes rails for approx. 69m crane runway (i.e. approx. 138lfm rails) and also the cut-to-length polter with a length of 22.30m!
The system is therefore complete and can be rebuilt directly.
Year of construction: 1992
Operating hours: 23000
Machine number:... more
Year of construction: 2016Operating hours: 100Machine number: 1886Track, m: 4,85Crane type: OBX V-24Range range: 12,55 mLoading capacity without grab: 2.500 kg / 13 mGrab: inclusiveElectric motor: 55 kWCrane arrangement: on the crane columnCabin side: leftSale on customer order
Bfoup3bhtb more
1985
ready for operation (used)
Crane Epsilon E 12-127
reach 12.5 m lifting capacity 900 kg
Fgamcz9b
Track 2.6 m
still in operation, but immediately available
ex place, loading is the responsibility of the buyer more
1988
good condition (used)
Log Sorting with electronic control system Rema 7015.
Log sorting conveyor with hydraulic
“kick off” 2 x 8 bins.
Installation year: 1988
Bamde20d8h more
Log sorting
Brand Hammar / Interlog mounted
Log length max. 6000mm
Log diameter max. 600mm
2 shared timber table control cabin and timber crane
Timber Elevator
feeder
Root reducer Bruks RR 1200th
Conveyor systems for root reducer chips from RR 1200
to the warehouse
The receiving conveyor
Metal ABB.
Measuring station Rema
Item 9015 - MR 9001.1 38 9901 000th
Eheish7
Electrical equipment.
Incoming distribution center
2 x 23 tray with an electric motor powered by Pushers
Hydraulics more
Timber sorting (completely revised in approx. 2000).
Was developed for round logs 8-50 cm.
Bigger diameters are also possible, but without crosscuting.
Capacity - 20-50 m3 / hour, depending on diameter.
Consists of:
1. Log wood task for long logs up to 18 m;
2. Crosscut system with hydraulic tension and programming;
3. Second log wood task for short wood;
4. Surveying;
5. Sorting line with 46 boxes with hydraulic ejectors;
6. Control with controller.
Bbit3blgq0
Total length - about 145 m.
Ver... more
Year of construction: 1994 Hours of operation: 44760 Machine number: 1379 Track, m: 3.00 Crane type: OBX IIRrangement: 13.0 m Capacity without grab: 2,200 kg / 13 mGrab: inclusiveSaw: Alpha 1.6Sawdust container: without crane arrangement: behind the cabinCab side: leftMeasurement: dividing aid! Sale by customer order !!
Bfvwlht2e3 more
1992
used
SOME BZ / sorting carriage 22 000 operating hours, lane 3, 60 m
Ekcob3x
CRANE OBX 1, SWIVEL, MONOLITHIC TABLE.
EURO 21 500.--+ VAT more
Dismantling possible from 01.01.2022!
consisting of:
- Roundwood feed
- Separation
- Alignment roller conveyor
- Transfer station and root reducer (make Bruks)
- Qualification strand with pre-length measurement and mirror for end faces
- Chop saw (Fa. Prinz) with spare chains
- longitudinal conveyor before and after debarking
- Bark conveyor
- Debarker (Nicholson company) A2
- 3-D surveying system (FY 2009) (Fa. Sprecherenergie) including PC systems
- Camera for live image transmission and scree... more
Roundwood sorting system REMA/Hedlunds 2015 completely revised, dimension scanner REMA from 2014
consisting of
Log feeder with 4 chains
Crane FISKARS F65 with log grab for unloading and loading (control via control panel)
Separation and alignment for inserters
block train
Conveyor through scanner
Dimensional log scanner REMA 9015
Bgqg3xonee
Seating control panel and control unit REMA 9015
2 x 9 sorting boxes, left/right discharge
Roundwood:
Diameter: up to 70cm
Length: up to 6m
The technical dat... more
Long wood system up to 22 m
Pre-carp saw, diameter 2000 mm
Main cap saw, diameter 1500 mm
Appendix car for exact caps
Metal detector
Hbrbtq3y
Sorting with 58 boxes
Electronics Jörg with cross-diameter surveying and full optimization
Without aburination, but with positioning lip for Cambio more
Year of construction: 2013
Machine number: 1846
Track, m: 3,00
P3czlxv2
Crane type: OBX V
range: 15.2 m
Load capacity without grab: 2,400 kg / 15.2 m
Gripper: included
Crane arrangement: next to the cabin
Cabin side: left
Electric drive with 55 kW
!! Sales in sales order !! more
1992
used
PROFILSCHINEN track layout for part a / sorting carriage, 2 x 65 m
Cyesviqy
30 x 50cm. EURO 27 000.--+ VAT more
- machine in stock
- CE certificate
- Technical Documentation
- production year 2007
TECHNICAL PARAMETERS:
- min. width of the central prism after the intersection of 55 mm
- minimum length of the cutter shaft 1200 mm
- length of the 300 mm feeding table
Vsrhp3
- maximum diameter of the cutter roller 350 mm
- shaft diameter 70 mm
- diameter of the circular saw 500 mm
- feed speed (smooth regulation) 0 ÷ 25 m / min
- motor power M1 drive bottom spindle 22 kW
- M2 drive power of the uppe... more
Roundlog sorting line, 2x10pockets, Bruks RR-700 butt-end reducer, 2D scanner, ABB metaldetector, hydraulic crane Foresteri, line is complete
Bdeyftnnzw more
Log sorting line with driving station as well as measuring conveyor and acceptance tapered roller conveyor. Manufactured by Springer, built in 1997. Acceptance tapered roller conveyor approx. 7,500 mm in length. Measuring conveyor approx. 14.0 m long with chain to the sorting fields. 18 sorting fields for wood lengths up to 4.5 m, 22 sorting fields for wood lengths up to 5.0 m. Drive station with 2 x 75 KW drive motor. Kickermotor right / left with 3.0 kW each. With steel base at a height of 2,6... more
Drive part sorting line with slip-on gear motor 45kW deflection station with block hoist approx. 13m, incl. chain with driversDismantled, ready for loading
Bfgmijuci more
Year of construction: 1989
Operating hours: 31.000
Machine number: 976
Track, m: 3,00
Crane type: ASX II (year of construction 1999)
range: 13.0 m
Load capacity without grab: 1,250 kg / 13.0 m
Gripper: included
Saw: Alpha 1.3
Sawdust container: without
Crane arrangement: in front of the cabin
Cabin side: right
Measurement: one-piece machine
!! Sales in sales order !!
Bjnrw3bpgh more
sort dare BALJER ZEMBROD built 1993 operation hours 16500 schpurbreite 3 m 200 m crane Susan machines
Ihioqql more
Logsorting line with 2x8 sorting pockets, logdeck, metaldetector MD-500, 2D scanner (length, diam.) hydraulic pockets
Bfoxzcqjsc more
Year of construction: 1993
Hours of operation: 33.550
Machine number: 1338
Track, m: 3.00
Crane type: OBX II.
Range: 15.2 m
Ixuiivhj
Capacity without gripper: 1,900 kg / 15.2 m
Hook: included
Crane position: behind the cab
Cabin side: left
Saw: without
Measurement: without
with cable and trailers
!! Sales in the sales order. more
Year of construction: 1991
Hours of operation: 17093
Machine number: 1168
Track, m: 3.00
Crane type: ASX
Range: 13,00 m
Nj22j
Capacity without gripper: 1,250 kg / 13 m
Hook: included
Saw: Alpha 1.3
Cut flour container: without
Crane position: in front of the cabin
Cabin side: left
Measurement: monolithic help (function not guaranteed) more
Year of construction: 1991
Hours of operation: 12735
Machine number: 1174
Track, m: 3.00
Crane type: ASX range: 14,00 m
Capacity without gripper: 1,250 kg / 13 m
Hook: included
Crane position: behind the cab
Cabin side: left
Measurement: Meter
!! Sales in the sales order.
Mviix more
Year of construction: 1999Operating hours: 30690Machine number: 1573Track, m: 3,00Crane type: OBX IIRrangement: 11 m Load capacity without grab: 2.400 kg / 11 mGrab: inclusiveSaw: Alpha 1,6Sawdust container: with crane arrangement: behind the cabinCab side: rightMeasuring: Counter! Sale by customer order !!
Pt2sfa more
Year of construction: 1991
9ubnh7i9n
Hours of operation: 17,500
Machine number: 1173
Track, m: 3.00
Crane type: OBX I.
Range: 13 m
Capacity without gripper: 1,800 kg / 13 m
Hook: included
Crane position: in front of the cabin
Cabin side: right
Measurement: electric meter
!! Sales without cutting head! more
Year of construction: 1988
Machine number: 896
Track, m: 2,60
Crane type: OBX I without Tele (year of construction 2004)
range: 15.2 m
Load capacity without grab: 1,800 kg / 13.0 m
Te2rrqtn
Gripper: included
Saw: Alpha 1.3
Sawdust container: without
Crane arrangement: behind the cabin
Cabin side: right
Measurement: Counter
!! Sales in sales order !! more
Year of construction: 1993
Operating hours: 31.000
Machine number: 1344
Track, m: 3,00
Crane type: OBX II
range: 13,00 m
Lifting capacity without grab: 2,200 kg / 13 m
Gripper: included
Yhsao8nl
Saw: Alpha 1.3
Sawdust container: with
Crane arrangement: behind the cabin
Cabin side: left
Measurement: dividing aid
!! Sales in sales order !! more