Used Log Sorting for sale (2,556)

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Ncsdpfx Acsxgt U Eoneu Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Ncedpfx Asw Ug Agecnsu

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Hydraulic log kickers Nodpjr Hbcfjfx Acnecu

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control Ncjdpfxogvu Als Acnsu - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: good (used), Log sorting crane, sorting carriage, Wolf RSZ 300/12.5 Year of manufacture: 1979 with Jonsereds crane, type: LONG-JON with cut-off saw with length-measuring device with grab with rails with cable The machine was in operation until the end and is in good working order; the cylinder of the grab needs to be re-sealed. Nsdpfxog T S E To Acnocu Location: Germany, near Passau Please also check my other listings. I look forward to your inquiry.

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A Nedpok Eakvofx Acnecu -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Ncjdpfxelatz Do Acnju Belt length: 2000 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 2,090 h, automatic log sorting line with 10 pockets. Processes logs with diameters ranging from 60 to 400 mm and lengths from 2 to 4 meters. Completely new electronics were installed in 2020. Nodpozcf Dfjfx Acnscu

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic Nodpjyzhvvjfx Acnecu sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: Njdpfxjxz R Nis Acnocu - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Njdpfx Ajxmr Rrecnecu Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. Ncedpey I Nugofx Acnou When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Ncjdpfx Acev Nwrwonsu

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor Ncjdpfx Asu Smq Socnju

Condition: used, Working width: approx. 1000 mm Njdpfxsy Rvqyj Acnecu

Year of construction: 2011, condition: good (used), Glass plate 6 cameras with illumination Two hoppers + one drive unit Integrated supply bunker 25 L / 50 kg with control unit Skako Bunker 125 Nsdpfoyu Ivnex Acnecu Loader for 10 crates Extra lens TC1224 + holder Extra lens TC23056 + holder without UPS

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm Ncsdpjyxyanefx Acnju - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: used, mileage: 638,926 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 14,790 kg, maximum load weight: 11,135 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,300 mm, brakes: retarder, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | DAF XF 510 Timber Transport 6x4 | Penz 15Z8.70 Crane, Year: 2014 | Lifting capacity: 4m: 3725 kg, 6m: 2450 kg, 7m: 2080 kg, 8m: 1785 kg | Short timber body with 2 pairs of stakes | Lane departure warning system, adaptive cruise control | Engine brake and intarder, air-sprung driver's seat | Electric windows, EURO6, automatic transmission | Heated seat, auxiliary heating, air conditioning, stationary air conditioning, Radio-CD | Differential lock, toolbox | Fog lights | ABS, ESP, payload = 11,035 kg | Tyres: Front axle: 385/65R22.5, Rear: 315/80 R22.5 | Loading length approx. 6.00 m | Wheelbase 4300mm / 1400mm | Sale only to business customers! | Subject to prior sale and errors. Ncjdpfxezf Iudo Acneu

Condition: excellent (used), I will sell a conveyor belt in very good condition. - Brand Euroflex - 5.3m/min - Length 300cm Ncjdpfxsvyllgs Acnsu - Width 50cm - Working height 85cm + 20cm adjustable legs. - Power supply 400V

Condition: used, SPRINGER revolver log turner Nsdpfxezdq N Ie Acnscu

Condition: used, Year of construction: 2004, Manufacturer: Marel Model: CompactGrader60 Year: 2004 Condition: Used Serial number: A026706 Stock number: 3387J Capacity: max. 120 pieces/min Product width: max. 250 mm Ncjdpfx Acozc Nhbonsu Product length: max. 400 mm Stations: 2 x 3 pcs Accuracy: Max 0.6kg/e=2g, Max 1.5kg/e=5g, Max 3kg/e=10g Belt width: 305 mm Compressed air: 6 - 8 Bar Power: 230VAC, 50Hz, 1Ph Dimensions: 2900 x 550 x 1600 mm

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 * LED work lights * LED lighting system Nodon Hrrispfx Acnecu * 2x toolbox * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us

Condition: used, mileage: 664,016 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, total length: 10,550 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, DAF XF 530 platform with Kesla crane, type 2112 + cabin Suspension: leaf spring/air suspension Wheelbase: 4.80 m KESLA crane Type: KESLA 2112 Year of manufacture: 2022 1x hydraulic extension 2x hydraulic outriggers 1x hydraulic grapple 1x cabin Platform Length: 6.80 m Equipment: - Engine brake - Digital tachograph - Heated seats - 2x beds - Refrigerator compartment - Radio-CD-AUX - Electric windows Nodpezgpkpofx Acnocu - Sunroof - Sun visor - Hands-free system - Lane keeping assist - Hill start assist - Central locking We will also be happy to assist you with financing/leasing options through our partners. All information without guarantee. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. machining allowance per side: 30mm - Fitted sleeve with a diameter of 90mm Nsdpfxezcw Dks Acnjcu - Cutter head drive motor: 22kW - Smooth feed rate adjustment + forward/reverse via inverter - Feed motor: 1.5kW In sequence: - Infeed trough - 6 toothed draw rollers - 4-cutter head - 6 smooth draw rollers - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg ADVANTAGES - Manufactured by the Polish brand SAFO - DTR+CE documentation - Includes sleeves - Used chamfering machine, very good condition Net price: 98900 PLN Net price: 23548 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Njdpfx Aeyglfdscnecu Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !!