Used Vertical turret lathes - double column - faceplate diameter over 3999mm for sale (18)

Condition: new, Year of construction: 2023, Operating hours: 200 h, Machine/vehicle number: SCR 45 2SF, Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 1.800 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning / milling tools Ehgegon Tool Storage 20 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 3 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Condition: new, Rotary table with C-axis and Y-axis FKD 40: Face plate diameter 4000mm Y-axis travel: 6000mm Load capacity 50 tons Max. Max. speed 120 rpm with Stoeber gearbox Bi9Niadwewo Master-slave clamping on C-axis and Y-axis, 2 Siemens motors 60 KW each (C-axis), 2 Siemens motors (Y-axis) 1st stage speed 0-20 rpm, 180000 Nm 2nd stage speed 0-120 rpm, 45000 Nm Recirculating oil lubrication, hydrostatic bearings Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t.

Condition: used, faceplate diameter:4000 mm swing diameter:4300 mm turning height:330 mm faceplate turning speed range:1 - 92 U/min workpiece weight:18 t feeds:1 - 4000 mm/min main drive motor:55 kW total power requirement:85 kVA weight of the machine ca.:64 t dimensions of the machine ca.:90, x 7,2 x 5,5 m 0S2Zimhqe with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor

Condition: new, table diameter: 4500 mm faceplate diameter: 4500 mm swing diameter with side support: mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 G00Dzs97G tool taper: HSK 100 (spindle) revolution per minute: U/min workpiece weight: 100 t table speed: 1 - 50 U/min passage opening in table: mm T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m dimensions electric cabinet: mm CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG

Condition: new, Year of construction: 2024, faceplate diameter 2000- 12000 mm swing diameter 2500- 15000 mm turning height 1600- 7000 mm Control Siemens/Fanuc I87Wf0Hgu We offer brand new CNC vertical lathes, with and without live tooling. Swing diameter could be between 2,5 to 15 m. Please send your enquiry if you are interested.

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, Turning diameter over cross slide: 5,500 mm, Rotational speed (max.): 60 rpm, Table diameter: 4,000 mm, ST - 40/55VC -Brand : S&T (KOREA BRAND) -Year : 2012 -Max Swing : 5,500 -Table size : 4,000 -Turning Height : 2,600 -Table rpm : max 60 -5axis (Z/X/C/W1/W2) -ATC 16ea -Milling tool 1,500rpm -CTS -linear sclae (x/z/w1/w2) -Tool setter -Chip conveyor -Work piece probe Gpcgyw

Condition: new, Year of construction: 2025, Functionality: fully functional, Turning height: 3,000 mm, Workpiece weight (max.): 50,000 kg, Turning diameter: 5,500 mm, Feed length X-axis: 3,150 mm, Feed length Z-axis: 1,800 mm, Faceplate diameter: 4,500 mm, Total height: 8,000 mm, Total width: 7,000 mm, Total length: 12,000 mm, Rotary table diameter: 4,500 mm, Table load: 50,000 kg, Warranty duration: 12 months, Vertical Turning Lathe, model SCR 55 New - In the process of Building - 2025 model year. Can be fitted with: Milling options, Various colors, Coolant trough spindle, Fanuc CNC (or similar). Table Diameter - 4,500 mm Max. Machining Diameter - 5,500 mm Cccoeak Swing Diameter - 5,500 mm Max. Machining Height (Max. Distance between Table Top and Standard Turning Tool Holder with Tool) - 3,000 mm Max. Workpiece Weight - 50,000 kg No. of clamping jaws (standard) - 8 Linear Travels X - Axis (Ram Carriage along the cross rail) (-200/+2,950 mm) + ATC travel Z - Axis (Ram vertical displacement) 1,800 mm Cross Rail travel 2,600 mm Table diameter 4,500 mm Standard table with T-slots Belt transmission Spindle speed range (continuously variable) 0 to 1,500 rpm Feed Motor power 5.5 kW Max. Thrust force 60,000 N

Condition: new, Turning height: 2,000 mm, Workpiece weight (max.): 30,000 kg, Turning diameter: 5,400 mm, Faceplate diameter: 4,000 mm, Rapid traverse X-axis: 10,000 mm/min, Rotational speed (max.): 100 rpm, Table load: 30,000 kg, Travel distance X-axis: 5,500 mm, Ram stroke: 2,000 mm, Power: 90 kW (122.37 HP), Vertical lathe FKD 40 CNC Fixed cross beam (not adjustable) Face plate diameter 4000mm turning diameter: 5400mm turning height: 2000mm Cross-section of the base: 400mm x 400mm X-axis: travel ±2750mm (=5500mm) Z-axis: travel 2000mm Speed of the faceplate: 0 - 100 rpm, manual gearbox Speed of the milling cutter: 0 - 3000 rpm, manual gearbox C-axis in the faceplate table Control: Siemens Bkqbgf7Yvji Max. centric load: 30t

Condition: used, Year of construction: 2004, faceplate diameter:4770 mm swing diameter:7000 mm turning height:1000 mm slide stroke:1000 mm workpiece weight max.:100000 kg faceplate turning speed range:2 - 20 U/min feed speeds:1 - 10000 mm/min rapid traverse:10 m/min ram head dimension:250 x 250 mm Bojzagaxqih main drive:100 kW total power requirement:200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment

Condition: excellent (used), Year of construction: 1999, Control: NUM 1060 (Simodrive 611 drives and Siemens motors) Faceplate diameter: 6000 mm Turning diameter: 6500 mm Max. turning height: 3200 mm (expandable to 4000 mm without modification) Up-down movement of the cross slide: 1800 mm Ram cross section: 360 x 300 mm Minimum. Immersion diameter: 480 mm Ram travel vertical: 2500 mm Ram travel horizontal: 8800 mm Cdlfpall Main spindle power: 160 KW Max. table speed: 83 rpm (2-step gearbox) Max. table load capacity: 80 tons Max. feed speed: 8 meters/min C-axis positioning: 0.0001° Milling spindle power: 30 KW Milling spindle speed: up to 2000 rpm (2-stage gearbox) ATC: 60 places (SK 50 + HSK 32 for milling & Capto for turning) High pressure through coolant Hydrostatic in all axes + faceplate Machine comes with: - Additional chuck with hydraulic clamping of 6000 mm - Coolant and filter unit - chip conveyor - Horizontal milling head - 3D measuring probe - Spare parts such as additional spindle motor, ball screws for X and Z axis, etc. - Built-in tool gauge - Built-in engraving device

Year of construction: 2009, Condition: used, faceplate diameter 4500 mm swing diameter 5000 mm turning height 2645 mm control Siemens 840 D cross rail adjustment - vertical 1500 mm max. ram stroke 2000 mm ram head dimension 300 x 300 mm faceplate turning speed range 0,4 - 95 U/min main drive 2 x 80 kW faceplate load max. 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm Pznkre - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation

Condition: excellent (used), Year of construction: 1999, Turning height: 3,200 mm, Workpiece weight (max.): 78,000 kg, Feed length X-axis: 6,600 mm, Feed length Z-axis: 2,500 mm, Faceplate diameter: 60,000 mm, Power: 150 kW (203.94 HP), Machine group: CNC lathe - vertical Make: DOERRIES Type: VC 6500/600MC Year of manufacture: 1999 Control type: CN NUM 1060 Origin: Germany Delivery time: immediately available Freight basis: ex works Description: - I2Hfwspmd Technical details / accessories / add-on Technical description Value Unit Travel - X-axis: 6,600 mm - Z-axis: 2,500 mm Max. Turning height (without tool): 3,250 mm Lathe chuck (faceplate) diameter: 6,000 mm Rotational speed: - Gear stage 1: 0.4 - 19.6 rpm - Gear stage 2: 1.5 - 78.0 rpm Drive power main drive: 150 kW Tool interface: Capto C6 Driven tools: Rigid milling head and angle head - Speed -- Gear stage 1: 6 - 700 rpm -- Gear stage 2: 17 - 2,000 rpm Milling drive drive power: 30 kW Milling drive torque: 1,400 Nm Tool magazine: - Turning Capto C6 -- Number of vertical pockets 34 -- Number of horizontal pockets 16 - Milling SK50 -- Number of vertical positions 40 -- Number of horizontal positions 7 Weight: Space requirement: L x W approx. 15 x 9.5 m Max. Loading: 78,000 kg Accessories -tool changer -milling unit

Condition: new, Year of construction: 2024, Vertical Turning center SCR 50 2S Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 4.500 mm Machining Diameter Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without ) Machining Heights 2.100 mm Work Piece Weight 30.000 kg Nominal Turning Travels X & U - Axis Ram Carriage From -100 mm To 2.600 mm Z and W - Axis Ram 1.250 mm Faceplate Diameter 4.500 mm/Normal face plate with T-slots Jaw chucks height 200 mm Work Table Speed: 0-50rpm Power Continuous S1 96 kW Torque Continuous S1 130,000 Nm Turning main drive mechanism Gear box reducer ZF and belt transmission Z & W - Axis Ram Turning Ram - Left and Right side B2Hhtrw8Ht Ram Size 250 by 250 mm Tool holder type KM 63 Tool Storage (ATC) No. of Tool storage 2 Tool Storage, left and right sides Stations qty 12 stations per each tool storage Stations type Turning toolholder ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum tool weight 50 kg Maximum tool size 250 x 150 mm X 700 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Z-Axis Ram Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Axes Rates X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min X, U And Z, W-Axes Rapid Rates 6,000 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -external coolant (turning) -internal Filtration unit: -type -accuracy 6 bar at 100 LPM 40 bar at 60 LPM Chips conveyor Conveyor type Hinged (Hardox material) Width The conveyors should have a width of 600 mm CNC Control -type -producer Sinumerik 840 Dsl Siemens

Condition: new, Vertical lathe FKD 40 CNC Faceplate diameter 4000mm Turning diameter: 4400mm Turning height: 3000mm Ram cross-section: 300mm x 300mm Cns7Zyeb X-axis: travel ±2200mm Z-axis: travel 2000mm W-axis: travel 1200mm Speed ​​of the face plate: 0 - 100 rpm, shifting gearbox Speed ​​of the milling cutter: 0 - 3000 rpm, shifting gearbox Faceplate table with C-axis CNC Control: Siemens PickUp station: 5 places Max. centric load: 35t

Condition: ready for operation (used), Year of construction: 1987, VTL Stanko 1540 Chuck diameter 4000 mm Max Heigth of piece 2000 mm Max weigth of piece 50 to Main motor 63 kw Gcdg2Ire Weigth of machine approx 100 to

Condition: refurbished (used), Functionality: fully functional, TECHNICAL DETAILS Faceplate diameter: 4000 mm Turning diameter: 4500 mm Workpiece height - max.: 2000 mm Installation height: 2000 mm Control for program: Siemens Sinumerik 840D Speed: 43 rpm Workpiece weight: 18 t MACHINE DETAILS Total power requirement: approx. 100 kW Machine weight approx.: 75 t Machine dimensions approx. LxWxH: approx. 6.0 x 8.0 x 6.4 m The carousel has 2 supports, one of which is equipped with a turret for turning work. Distance between side stands inside up to a height of 590 mm: approx. Ø 4,700 mm Distance between side stands inside up to a height of 2000 mm: approx. Ø 4,250 mm EQUIPMENT 4x clamping elements approx. 1200 mm as well as various supports for alignment (height) lying on pallet, see photo (additional clamping jaws optionally available) Hinged belt conveyor Mayfran P.11M8032.03 -Dimensions: LxWxH: 7.0 x 1.25 x 1.1m C92Cvv3 -Beam profile W x H: 720 x 220 mm -Collapse length/collapse width: 5,300 / 400 mm -Discharge height/width: 800 / 450 mm -Insertion length: 5,600 mm -Driven by motor The following services were provided in 2020: -1x rear handle for vertical lift bridge Guide lining renewed -1x rear grip for bridge vertical stroke renewed -2x ball screw drive with nut X-axis (2x support horizontal movement) was overhauled -1x right-hand support overhauled (all wedge strips and some support linings renewed; lubrication repaired and optimized) -1x support left renewed

Condition: used, Offer: CNC VTL Make: Titan Bi8Nrzmlhse Type: SC 33 Year original: 1985 Year retrofit: 2009 aprox Control: Rexroth - Germany Chuck dia: 3000 mm Swing dia: 3300 mm Max. turning height: 2300 mm Max. workpiece weight: 18 Tonnes Max. travel up-down of cross slide: 2050 mm Max. vertical travel of Left Ram: 1200 mm Max. vertical travel of right Ram: 760 mm Max. swivel of Ram: +-35° Machine weight: aprox 50 Tonnes

Condition: new, CNC vertical lathe FKD 80 Ijz9Mjmw Control Siemens Machining range diameter 8400 Max. Workpiece height 5000 Workpiece weight max. 120 tons driven tools speed 0 - 3000 Faceplate speed 0 - 70 Pick-up station 6 places Y-axis