Used Forest Technology for sale (23,394)

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads Fsdpfx Agex R Ta Ejropb REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Head configuration: The machines are equipped with two machining heads.

Year of construction: 2005, condition: used, Tablet dedusting unit Brand: Pharma technology Model: 1200 S Conveyor speed: adjustable Elevation height: 1200 mm Power supply: 230 V Fedpfx Ajx Rz Iwsgrepb Control module: metal detection Brand: Safeline Model: Tab/ex Year : 2005 Power supply: 230 V Ejector valve for non-conforming products.

Condition: as good as new (ex-display), Year of construction: 2025, The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts Fedpfeh S Undox Agrepb - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: good (used), CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg Fpedewt R Irjpfx Agreb

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Fpodpfotix S Nsx Agrob Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. An inspection of the machine is possible upon request and by appointment. Fpodpfx Agexcnkajrjb We are available for any further questions you may have.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Cost savings for the end user €38,000 vs. €21,000 DMA supplies high-quality CNC drilling machines at bargain prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to remain in control themselves. The purchase price includes: - CNC controller - CNC Cam - Starter kit of drilling tools Focus on functionality: Your machine, your management, our lowest price. No. 7 vertical rows No. 1 TH1 horizontal double spindle (X-axis) for front/back drilling Manual panel alignment END PANEL READER for perfect matching Remote support software Fpedpfx Aex R Drxjgreb Extraction flange Scratch-resistant BRUSH TOP to prevent accumulation of dust and chips Work MODE selectable at the operator side or in continuous cycle HARDWARE AND SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB port and Ethernet port for file import, online support, and software updates Linux kernel-based system Fobmsu U Hgiegku S Hepp CNC memory for up to 1,000 programs

Year of construction: 2014, condition: used, This listing is for a Freestead Technology WFI Storage Vessel Control panel. The unit is in full working condition and is ready for immediate release. Fodsxv A Sropfx Agrspb This Unit was installed new in 2015 by Freestead Process Technology. A control panel designed and built for WFI system

Condition: new, Year of construction: 2025, New machine made entirely of stainless steel included washing pump - Automatic basket drive - Touch button to turn the basket outside of the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 975 mm - Usable height of the basket to the lower edge of the nozzle holder Fpsdpfx Ashcpbbogreb 450 mm - Flat jet nozzles - washing pressure 3 bar - including 20 KG LCT Power Star 50-730 - 24 months guarantee - Shipping is possible

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control Fpjdpfjwubtnox Agrjb -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Condition: ready for operation (used), Adept Technology 10332-00600 VIS Board, Serial No. 6545902033, used, minor signs of wear, 100% functional, scope of delivery as per photos Fpedpei D Tttjfx Agrsb

Year of construction: 1999, condition: used, power capacity 1,5 kW feed pressure 11 bar liter capacity 160 l weight of the machine ca. 0,15 t dimensions of the machine ca. 1,5x0,5x0,8 m 380 V, 50 Hz with plug and cable Fodeu Sbd Tepfx Agrspb colour: light grey 2 cylinder, boiler 90 l compressor has been checked in our workshop, electr. testing report included!

Condition: repair required (used), Year of construction: 2003, functionality: not functional, It is a complete line for film recycling. It was bought together as complete line. Components • Shredder TRI TUR TM 3 model with hydraulic drive and 75 kW motor. • Pre-washing tank for contaminated film. Bottom sludge discharge. Made of stainless steel! • Water grinder L5 650/1000 10 rotating and 4 stationary knives • Centrifuge Fodpfxjx Ddche Agropb Mainly available as a single item! Used, in good condition, has not been in operation for a long time, requires repair. The grinder is currently in operation and can be viewed in Dunaújváros(Hungary) Check out our other products. (Re-pelletizing line, chiller...)

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Fpodpfsxhfpkox Agrsb Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Comprehensive IQ/OQ documentation for validation. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Year of construction: 2025, condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required Fodpfx Aoffhnljgropb additional options are possible: Filter housing with washable nylon filter Insert sheet made of V2A to protect the plastic surface Trolley

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 4900 Measurements depth 6190 mm Measurements height 2450 mm Machine weight 8400 kg Control Unit Brand FANUC Model FANUC 16I-PB Main Drive Main motor power 12.5 kW Movement X-Axis Movement 3090 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 1540 mm Y-Axis Rapid Traverse 65 m/min Table Outer length 1500 mm Outer width 3000 mm Additional Equipment Integrated Auto-Index system Automatic tool change system with 15 stations Waste extraction system at the die Pedal for opening/closing sheet clamps Pedal for single punching operation Automatic collision prevention for tilting parts and cutouts Interactive CAD with export function Import of CAD drawings in common formats Interactive nesting (freehand, bump nesting) Automatic positioning of special tools This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Fsdjx D Nk Ropfx Agropb Application Types Punching

Condition: new, Adept Technology 10332-00714 Processor Board, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Fpodpsi D Ttzsfx Agreb

Condition: excellent (used), functionality: fully functional, FOR SALE : MANUAL CANDLESTICK MAKER WITH NO ELECTRICITY REQUIRED Fpjdjrmix Nepfx Agreb 1 SECTION OF 5 ZLOTY COIN- 13 SALE PLACES 2 SECTION OF 5 ZŁ COIN- 21 SALES PLACES0 3,4,5 SECTION OF 2 ZŁ COIN- 27 SALES PLACES ON EACH SECTION

Condition: used, functionality: fully functional, Year of construction: 2007, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Fpjdexzpuwjpfx Agreb

Condition: new, Year of construction: 2025, - New machine made entirely of stainless steel including washing pump - Automatic basket drive - Touch button to turn the basket outside of the cleaning procedure - Tank cover and mesh filter under the stainless steel basket Fpjdeffqi Uspfx Agreb - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 790 mm - Usable height of the basket to the lower edge of the nozzle holder 430 mm - Flat jet nozzles - washing pressure 3 bar - including 30 KG LCT Power Star 50-730

Condition: new, Adept Technology 10332-00655 EVI Board, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Fsdpfx Agsi D Ttwerepb

Condition: new, Year of construction: 2025, - Demonstration machine from 2025 completely made of stainless steel including Washing pump - Automatic basket drive Fodpjg Hgcwjfx Agrjpb - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: ready for operation (used), Adept Technology 10337-15200 Servo Amplifier Control Robot Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fjdsi D Tt Eopfx Agrspb

Condition: new, A-Drive Technology M644-1340-1208-06MPZ SN:2003004, unused in opened original packaging, 100% functional, scope of delivery as per photos Fpsdpfei D Ewdox Agrsb

Condition: ready for operation (used), Adept 10330-10150 REV B control board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Fpedpfx Agsi D Ttpereb