Used Forest Type for sale (35,008)

Condition: used, Year of construction: 2001, functionality: limited functionality, feed length X-axis: 30,000 mm, feed length Y-axis: 2,400 mm, feed length Z-axis: 500 mm, FOR SALE 3 3 Forest gantry milling machines as discussed. Below are the specifications for these machines: - Models: Type V2 2500 EAS and Type V3 2300 AS - Capacity: 30,000 mm (X) x 2,400 mm (Y) x 500 mm (Z) - Equipment: Equipped with 2 heads REFURBISHED IN 2001 CNC NUM 1060 General Specifications Below are the common specifications of the machines discussed: Models concerned: Forest Type V2 2500 EAS and Type V3 2300 AS. Working dimensions (Capacity): X axis (longitudinal): 30,000 mm (30 metres). Y axis (cross): 2,400 mm (2.4 metres). Z axis (vertical): 500 mm (0.5 metres). Gtsdpfx Ajx R Ta Esg Tot Head configuration: The machines are equipped with two machining heads.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Gtsdpfotix S Njx Ag Tet Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: Gtodpovmwn Hsfx Ag Tst ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: new, Year of construction: 2025, total width: 2,400 mm, total height: 18,000 mm, total length: 3,000 mm, warranty duration: 12 months, overall weight: 700 kg, power: 1 kW (1.36 HP), Automatic Pallet Nailing Machine for Wooden Pallets PT 1000 Plus – Polish Manufacturer. Gedpfx Asm E Np Uog Tott 100% brand new equipment. The nailing machine utilizes CN coil nailers for nails in coils. Device description: The nailing machine consists of a single working table. The finished pallet is ejected on the opposite side of the machine, allowing for easy integration with the Forest PT 16 stacker. This configuration ensures full utilization of the device. Capable of nailing pallets with: • Deck with 5 boards + 3 bottom boards • Deck with 6 boards + 3 bottom boards • Deck with 7 boards + 3 bottom boards • Deck with 9 boards + 3 bottom boards • Pallets with stringers (runners) Possible pallet dimensions: max 1200x1200mm, min 600x600mm - Dimensions: length 3000cm, width 2400cm, height 1800cm - Quick adjustment for pallet size – height is automatically set; deck boards do not need to be perfectly uniform in thickness. - Simple operation with flexible nail placement and selectable nailing mode and quantity per joint - Standard configuration includes 8 nailers, with option to install up to 10 units.

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Gsdsunia Hjpfx Ag Tett

Condition: excellent (used), Year of construction: 1991, Drum 3 mm, plastic Godpoxx T Nysfx Ag Tstt

Condition: excellent (used), Year of construction: 1997, TECHNICAL DATA Gjdpfeir Iwujx Ag Tott Number of bays 5 Bay width 2600 mm Bay load per compartment max. 2600 kg Max. bay load per bay 9540 kg Support profile INP 100 Total length 14 m Shelf height max. 750 mm Depth 0.9 m Height 4.6 m

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Gsdpfx Agsxh Rqtj Tstt Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed Specifications: Gsdpfx Agsx Tifpo Tett Bowl Volume: 4 gal Motor Power: 1 hp Jacket (Y/N): Y

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor Gtsdpswwk Rbsfx Ag Tet

Year of construction: 2010, condition: used, Field of application: Freight transport Gtsdjxq A U Nspfx Ag Tst Please contact ATS Norway for more information Please provide reference number upon request: 21659 Specifications:• New axles• 1 m³• One new tire included• One new hose included• Tested and in working condition• Ready for delivery Own weight: Model: Falköping sandstrøer for lastebil type LB1000

Condition: used, Horizontal tank, insulated, jacketed Brand: Limitech Denmark, Type A3111-1906 Capacity: 1,500 L, 2 identical units Insulated, jacketed, manhole at top Stainless steel tank AISI 304 Gtsdpfx Agex Ttnns Tjt Cooking tank with robust horizontal agitator Special cooking vessel Motor with gearbox 4 kW, jacket rated for 4 bar pressure, max. temperature 100°C

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm Godex T A Dxspfx Ag Tott drum diameter: 1.300 mm net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Gsdpfxsv Nw Npe Ag Tott Machine weight approx. 20 tons

Condition: used, Used SILVERSON stainless steel in-line mixer Gjdpfsx Ryvgsx Ag Tstt Type 450L N° : C450L M642 Hp 10 – 3x 220/380 volts

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Gedpfxewwk Tvo Ag Tett Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t Gtodpouh E Tbefx Ag Tjt

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Gsdpeugbn Esfx Ag Tstt Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm Gtedpox T A Abofx Ag Tst adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Godpfx Ajwwarueg Tett Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Used Becomix type MV-2000 stainless steel premix vacuum processing vessel. Approximately 2,000 litre capacity. Has welded dished top and welded dished bottom heads. Internal rated 2 bar / full vacuum design pressure at 134 deg.c. External jacket rated 4 bar design pressure at 152 deg.c. Unit has bottom entry agitator driven by a 5.5kW 980 RPM 3/415V 50Hz electric motor. Unit is mounted on stainless steel legs. Godpfx Agjx Rypao Tjtt Click on the link below to see a video of the machine running. Specifications: Capacity: 528 gal Type of stainless: stainless steel Internal Pressure: 29 PSI Internal Temperature: 273°F Jacket Pressure: 58 PSI Type Of Heads: welded dished top and welded dished bottom Legs/Lugs: Yes

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Gsdeu T S Dwepfx Ag Tstt Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists Gtjdpfxox Tp Htj Ag Tjt dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: like new (used), Year of construction: 1998, Retrofitted: 2024 Numerical control: SIEMENS 840D Godsugbq Hspfx Ag Tett Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding   Automatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04 Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request   View all technical features

Condition: like new (used), Year of construction: 2004, Retrofitted: 2024/2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmDistance between columns: 2530 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories GuardingExternal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsSale price (Ex Work): On request View all technical features Gsdsugbpiopfx Ag Tjtt