Used Soldering for sale (105)

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW Godpfeu Rnd Dex Aftekf - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Year of construction: 1997, condition: ready for operation (used), A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible. Gkjdjx Ecuxepfx Aftsf

Condition: excellent (used), I am selling Weller WSD 81 soldering station. Gksdpfxju Sviwe Aftof Digital station with soldering iron WSP 80. Infinitely adjustable temperature with buttons, in the range of 50-450 ° C. Digital display. Possibility of locking the temperature control, setting the function of saving the mainsheet (necessary device WCB 1 or WCB 2).

Year of construction: 2004, condition: good (used), functionality: fully functional, machine/vehicle number: 2340-F / 04071226482, Dimensions: System 7mx2mx2m; handling can be disassembled into smaller units of 2mx1mx1m Weight: System approx. 1 ton; other handling components each 100kg Equipment: incl. Asys solder frame handling with lift and ejector Gjdpjx Adx Hefx Aftskf - Power connections: 400V; compressed air 6 bar; nitrogen 6 bar - Interfaces: Smema for handling; exhaust air 200mm - Working area: according to Seho original - Drives: according to Seho original equipment - Control: according to Seho original equipment - Miscellaneous: Full tunnel system with nitrogen

Condition: used, Year of construction: 2023, ERSA VERSAFLOW 3/35 ELITE, vintage 2023. The fully inline selective soldering machine a flux, a preheating and a soldering module with a segmented conveyor system. The machine is equipped as standard to handle all production requirements quickly and efficiently. Gkedpsxuh Uiefx Aftof Machine in great working condition with minimum hours! Specification, pictures and other details upon request. Machine is located in EU!

Year of construction: 2019, condition: used, 0 300 x 300 x H50 mm process temperature 100 - 260 °C cycle time 6 min. Gkedpoxh Nu Rjfx Aftof total power requirement 2,00 kW weight of the machine ca. 0,10 t dimensions of the machine ca. 0,60 x 0,60 x H0,60 m The main target areas of application for the vapor phase soldering system VP 310 series are labs, and prototype and small series manufacturing operations. Due to the compact dimensions and the fact that no stationary supply systems are needed for operation, it is perfect for troublefree application at many different sites. 240V power supply are all that is needed. Typical application areas - Lab usage for qualification and test of soldering processes - Secure SMT reflow soldering of single PCB assemblies - Quality control and assurance of soldering pastes and printed circuit boards - Rework and repair of PCB assemblies with safe and reliable desoldering and resoldering of components.

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. Gkodpsu Rwauofx Aftsf - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 2002, condition: ready for operation (used), A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026. Gjdjxn Aatopfx Aftokf

Condition: excellent (used), I am selling Weller WTCP-S soldering station. Price per 1pc. Gkedpfx Asu Svmvsftef

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm width: 200 mm Depth: 40 mm Solder capacity: 16 kg Gsdpfeb Nxf Tjx Aftokf Power input: 2400 W for mains voltage: 220 V

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 05071232191, For sale is our Seho wave soldering system (without tin). Model: MWS 2340. Condition: very good and fully functional. Includes fluxer, 2 x lifters, corner transfer unit, 8.50 m conveyor section, 1 x solder pot, 2 x pump drives, 2 x solder waves. Wave type: Wörthmann 3/5. The soldering system can still be inspected in operation for a few more weeks. Only defect: small cracks on the panel in photo no. 4. Gjdow Rl S Eepfx Aftekf

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Line for the production of multi-layer sandwich panels (SIP, PVC) as a complete set, according to the Requerement Specification manufafactured. Gkodpoxpv Sxefx Aftsf

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Gkodpfx Ajxdanteftef

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Gkedpfx Afsxbp Nbotsf

Year of construction: 1997, condition: ready for operation (used), Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg. Gksdpfow Uk Aqjx Aftef

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support Gkjdev Inw Ujpfx Aftof PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Year of construction: 2009, operating hours: 500 h, condition: like new (used), functionality: fully functional, This 2009 machine has worked around 500 hrs. It looks and smells like almost new. Belt conveyor. Ideal for portotyping and/or glue curing Gsdpewiwz Dofx Aftskf

Year of construction: 2010, operating hours: 63 h, condition: used, functionality: fully functional, incl. Chilly 45-S cooling unit Gedpfjwtnxzjx Aftekf

Year of construction: 2019, operating hours: 46,318 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 19051296729, No minimum price – guaranteed sale to the highest bidder! EQUIPMENT - Fixed double-lane pin chain conveyor module - Gripper head with rotation and tilt function - Workpiece carrier EDH-ER + G08 - Double preheating cassette, 8 × quartz radiators - Pyrometer control for quartz preheating Gkedpfx Aewzu Ursftsf Additional equipment details can be found in the attached PDF. Operating hours: 46,318 (as of 10.07.2025) Further information according to manufacturer – without guarantee. TECHNICAL DETAILS - Repeat accuracy: ± 0.1 mm - Rotation function: 0–270° - Soldering angle adjustment: 0–12° by tilting the gripper - Max. workpiece size: 500 × 500 mm - Max. solder tip temperature: up to 350 °C MACHINE DETAILS - Rated voltage: 230/400 V - 50 Hz - Rated power: 18,000 W Dimensions & Weight Installation dimensions (W x D x H): 2,170 x 2,110 mm Nitrogen and compressed air connections - Nitrogen connection: R 1/4″, min. 4 bar - Nitrogen consumption (single nozzle): approx. 1.5–2.0 m³/h - Recommended nitrogen value: 5.0 - Compressed air connection: R 1/4″, min. 6 bar - Exhaust: 1 × 500–600 m³/h Commissioning note: The machine must be connected to the manufacturer via VPN once in order to reactivate the control system.

Condition: used, very good condition Godpfxohc T Ire Aftskf

Condition: ready for operation (used), Soldering volume: approx. 400kg, wave width: 400mm, usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, heating power crucible: 9kW, heating time 20°C-250°C/190°C-250°C: 150min/60min, transport speed: 2m/min, power requirement: 18.5kW. Machine dimensions X/Y/Z: approx. 2300mm/850mm/1650mm, empty weight: approx. 450kg. Documentation available. Gkodpfx Afjud Svzotef

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 Gjdsv Ta Hlopfx Aftokf 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Convection heating

Year of construction: 2005, condition: ready for operation (used), The system has been switched off since 2014. Until then, all maintenance was carried out. Soldering width: 400mm, preheating zones: 6, convection heating length: 2000mm, soldering wave width: 450mm, max. soldering wave height with F-nozzle: 8mm. Total length: approx. 30m, infeed conveyor with stacker for return transport: approx. 14m, fluxer and soldering module: approx. 11m, outfeed conveyor with stacker for return transport: approx. 7m. Documentation available. Including 350kg solder, 3 loading tables, 40 outer frames and some spare parts. On-site inspection is possible. Gedpettmp Tjfx Aftekf

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Gkjdpfxsn Htktj Aftjf

Year of construction: 2007, condition: ready for operation (used), Max. circuit board dimensions: 330x420-400x495mm, conveyor speed: 0-2.5m/min, an on-site inspection is possible. Gkodpfjqy I Ntex Aftof