Used Soldering for sale (93)

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics Fgsdpfx Aer Eqbyodzei MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: good (used), Year of construction: 1992, Mobile welding fume filters, welding fume extraction, soldering fume extraction Fodpfob A Sbmsx Adzjgi -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. Fgedpog Eglpjfx Adzji 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Welding fume extraction: welding fume extraction arm -Extraction arm: Ø 200 mm x 4700 mm -Transport dimensions: 2490/800/H290 mm -Weight: 31 kg Fgedpjztwgrefx Adzoi

Condition: new, Year of construction: 2025, Model: CT Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head Fsdsg I H Iyjpfx Adzsgi By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: new, Year of construction: 2025, Model: C3T Working Area: 3048mm*1524mm Laser Output Power: 6000w/3000w/2000w/1500w Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 100m/min Max. acceleration: 1G Fjdjg D Nz Repfx Adzsgi 1. Double Fast Exchange Tables Fast exchange of two tables greatly improves efficiency. Chain-drive system has better rigidity and higher accuracy, saving feeding time. 2. Tenon-and-mortise Welded Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm Fsdpstp S E Ejfx Adzegi The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Year of construction: 1990, Mobile welding fume filters, welding fume extraction, soldering fume extraction -Drive: 2.2 kW -Extraction arm: 3000 mm -Connection: 380 V 50 Hz Fgodob A Nucjpfx Adzoi -Dimensions: 860/1250/H1950 mm -Weight: 122 kg

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Fedpfxohgfnbe Adzsgi Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Fgedpfxohgr Ihe Adzei Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing Fsdpehqmamofx Adzsgi • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Fsdpfx Adehg Rcxezsgi Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, machine/vehicle number: S-CL-100-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 134 m³/h, total height: 475 mm, total length: 250 mm, total width: 250 mm, overall weight: 17 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Fgedpfxjwpu Tws Adzsi Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Fgedpfx Aohgg Rrsdzoi Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, machine/vehicle number: S-CL-250-FN-EC, functionality: fully functional, input voltage: 230 V, volume flow: 250 m³/h, total height: 600 mm, total length: 340 mm, total width: 430 mm, overall weight: 35 kg, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Fgsdpfxevrylfe Adzei Protection class: IP54 Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg Fgsdpfx Adefkzbdszei

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm Fjdpfx Adjhtn Sbszjgi -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: used, Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package Fgjdpfxscbkkbj Adzji -Weight complete: 11.5 kg/package