Used Soldering for sale (107)

Condition: used, very good condition Kfedpfxjhc T Ire Agzja

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Kodpew Dtgrjfx Agzefa Ask for additional details!

Condition: like new (used), Year of construction: 2022, Machine like new condition. Ex demo machine. Kodpfx Agew Dr Tqozefa Ask for additional information!

Condition: used, Year of construction: 2011, Operational condition machine. Kfjdpfowzr Agex Agzea Two pots. Variable Z system. One lead free (SAC 305) and one leaded (Sn63Pb37). If needed, the inner pot can also be made lead free with additional cost. Can be bought with nitrogen generator. Ask for additional details!

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Kedpfxswnfbvs Agzofa Ask for additional details!

Condition: used, Year of construction: 2023, 2 systems available, one 2019 and 2023. Ask for additional information! Kfodpfxjwcrdts Agzoa

Condition: used, Year of construction: 2006, -Spray fluxer -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Kfedpowcf Rajfx Agzea Ask for additional information.

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Kodpfovfp Nmox Agzsfa Ask for additional information!

Condition: used, Year of construction: 2013, Segment: Fluxer Storage space for flux canister under the fluxer Alcohol-based flux Segment: Preheating Medium-wave heating from below, convection from above Segment: Pre-warming 8 quartz radiators, controllable in groups of 4 Segment: Preheating + Divided Solder Pot Long-wave heating plate Solder nozzle with leaded solder, 1st section Solder pot with lead-free solder, 2nd section (out of operation) Kfodpjv Sy Akefx Agzoa Availability in end of Q2 2025. Ask for additinal information!

Condition: used, Soldering station, soldering iron, chip solder, soldering system, desoldering station -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar -Dimensions: 190/120/H110mm Kfedpfotu Rk Ejx Agzoa -Weight: 2.3 kg

Condition: good (used), Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor Kfedpfxstvb Dxo Agzea -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

Condition: used, Year of construction: 2021, Serial number: hcmdeq50j0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20012 Kfedpfx Agov U S Tyjzoa Specifications: 2021 model 1100 hours (doesn't matter) 42.2 kW 8730 kg Machine width: 232 cm Additional hydraulics Central lubrication Track steering Engcon proportional tiltrotator Undercarriage in good condition Multi-X coupling on hydraulics Webasto Taillight rig on the solder Sanding tray Tiltrotator with clamp Air conditioning Radio Toolbox Ready for delivery Description:We have a 2021 Hitachi ZX85US-6 tiltrotator excavator with grapple and sanding bucket for sale.According to the owner, According to the owner, it was taken out 6 months ago in 2022. According to the owner, everything works as it should. The machine has few hours.Service is carried out by the owner.The machine is ready for delivery. Own weight: 8730 Model: zx85us-6 gravemaskin m/ rototilt med klype og pusseskuffe

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Ksdpfjx H Ryujx Agzjfa Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Kjdpfx Aoxzug Ssgzjfa Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Kodou Af Abspfx Agzefa

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Kfsdjn Armaopfx Agzja Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW -Volume flow rate: ³/h -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm Kodpfjx I Aknex Agzefa -Number: 3x welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Year of construction: 2017, condition: used, functionality: fully functional, Manual SMT stencil printer for solder paste for stencils 520 x 520 mm Quick clamping system: SPGEN-SP004-ML (520 x 520 mm) Kodpfxex Ea Nas Agzjfa

Condition: good (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 400 V, ground cable length: 5,000 mm, type of cooling: water, TIG welding unit, water-cooled, DC/AC power source CITOTIG 350W AC/DC Welding current range 3...350A DC / 10...350A AC with 5m power cable with plug for mains connection 3 x 400V - Gas hose 1.5m - Ground cable with fixed clamp 5m, 50mm2 - Transport trolley TY2A - Coolant FREEZECOOL 10l Kjdpsx A S Txjfx Agzsfa - TIG torch CITORCH T 35W EB C5B, 5m water-cooled - TIG torch CITORCH T 10W EB C5B, 5m water-cooled - Argon / CO2 pressure regulator

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Kedpfx Ajxzrfljgzofa Tool, spare parts box New timing belt, new impeller for drive installed

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 Kfedsv Uplaspfx Agzsa English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: used, Year of construction: 2015, Vitronics Soltec myReflow 7038 SMD reflow soldering oven Year of construction 2015 Pin length: 5 mm Pin spacing: 19 mm 10 heating zones Ksdpfjuhfm Uex Agzefa 4 cooling zones N2 pressure: 6 bar LP width: 50 mm - 508 mm Max. component height: 40 mm / 30 mm (top / bottom) Transport height: 832 - 914 mm Width adjustment: electrical Software version: 4.0.6.b

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW Kfsdsx Hvqfjpfx Agzsa -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: good (used), Year of construction: 1992, mobile welding smoke filter, welding smoke extraction, soldering smoke extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg Ksdpob A Sbmjfx Agzsfa

Condition: good (used), Clamp welding machine, foil welding machine Kjdpfeb A Sm Djx Agzsfa -Connection: 220 V -Working width: 300 mm -Weight: 10 kg