Used Welder for sale (327)

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Type :900 AES series actuator Lhedpfx Abst H Nhus Tjc Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Lhodpfexlvn Eex Ab Tjc

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Ljdpfovvf T Asx Ab Tohc

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine Ljdpfoxgg Rtox Ab Tjhc H17, Spool pay-off system, cross wire DV6, Prefeeding system DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system. Lodjxgg T Uspfx Ab Tehc

Condition: new, Year of construction: 2018, Automatic Angle Welder Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 Lodpewriuusfx Ab Tehc No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm

Year of construction: 2018, condition: good (used), Fully automatic L-sealer / Fully automatic side sealing machine Manufacturer: Diez Type: AWS-C 9070 CS Year of manufacture: 2018 Lhsdpfx Aotzcd Seb Tjc Shrink tunnel Manufacturer: Diez Type: HTC 122-40D Year of manufacture: 2018 Operator side: Left in the running direction Clear passage width: approx. 600 mm Clear passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / belt height in/outfeed: approx. 860 mm +100 Output: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 Ph + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function Lodpfx Abshubg Te Tehc - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function Ledjwa Uwdjpfx Ab Tehc - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2025 by Thermatool specialists Technical specifications Output power: 350 kW Welding frequency: 180 - 300 KHz Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Input Voltage : 380 VAC / 50 Hz Lhodpfx Abjymadbo Toc Total installed power: 525 kVA

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Ljdpsyl U R Hsfx Ab Tehc Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Condition: used, THERMATOOL HF welder CFI 200KW In excellent working conditions. Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz Scope of supply - DC Power cabinet - HF cabinet with auto-match system and output busbar to coil holder Lhsdoymad Ispfx Ab Tsc - Single axis adjustment table - Operator HMI diagnostic system/controls - Closed loop Water cooling pump/heat exchanger - Spare electrical cards x 12 - Spare thyristors/power supplies(4) / spare auto-match drive belts - Approximately 40-45 induction coils in various sizes to suit tube range 19-89mm Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz

Condition: used, SOLID STATE HF WELDER EFD INDUCTION WELDAC 250 kW SCOPE OF SUPPLY 1. Complete welding unit EFD Weldac 250Kw 2. Input Autotransformer 3. Complete cooling unit and water circuit 4. Control desk with PC Lhedpfjymak Uex Ab Tjc 5. Existing documentation 6. Output busbar TECHNICAL DATA Manufacturer EFD Induction Model WELDAC 250 Nominal power (output power): 250kW Welding-Frequency (nominal): 250 -310Khz Total installed power: 346KVA Nominal power: 250 kW Welding frequency range: 250 -310 kHz Total installed power: 346 kVA

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 300 A, welding current at 100% duty cycle: 250 A, welding current (min.): 25 A, welding current (max.): 350 A, Lorch MicorMig 350 – Synergic MIG/MAG Water-cooled 3 Months warranty Refurbished, tested, and ready-for-use Suitable for: Daily welding work, machine building, steel and stainless steel construction up to 15mm Not suitable for: Aluminum, on-and-on production welding, ship building. Specifications: 350 AMP 380 Volt Synergic SpeedArc 2/4 Step 4 Roller drive Lodeyi Udbopfx Ab Tohc Fixed programs Elektrode option Including: Welding torch, ground cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (max.): 300 A, Tico Tig 300 ACDC – Watercooled TIG welding machine Lhsdpfoyi Uacsx Ab Tsc 3 Months warranty Refurbished, tested, and ready-for-use Suitable for: Daily welding work

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Lhedpfx Aeudipfjb Tjc Model Starweld POB-36-2100; production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Line and Cross wire feeding - from precut wires / bars Construction year - 2007 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. Lhedjwr Tk Hopfx Ab Tsc VIDEOS AVAILABLE upon request.

Condition: excellent (used), Complete production plant for production of 3D fence panels Plant consist of - Mesh line for 3D fence fully automatic ( Brand - PRATTO ) Powder coating line for 3D fence panels ( like new...only installed and tested) Ljdpfx Abjtywvuo Tjhc Please contact us for more details.

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Lhedpfx Absvxq Eio Toc Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Condition: used, Year of construction: 2000, Schlatter mesh welding line Lhedpfx Abetmw Nye Tsc Please contact us for more details. Thank you!

Condition: excellent (used), Year of construction: 2020, Mesh welding line Brand - Schnell Italy Construction year - 2020. Min/Max wire diametr - 4,00 - 12,00 mm Max width of mesh panels - 2,500 mm Max length of mesh panels - 9,000 mm Line wires feeding - from precut wires Cross wire feeding - from precut wires Lhsdpfsvuhvqex Ab Tjc Condition - EXCELLENT !!

Condition: used, Year of construction: 2002, functionality: fully functional, SCHLATTER model MG 316 Mesh welding line Ledov Unt Nspfx Ab Tohc Technical Details - • Purpose: For the production of standard mesh • Manufacturer Schlatter • Condition: Not in operation • Longitudinal wire Ø min: 3 mm • Longitudinal wire Ø max: 8.5 mm • Crosswire Ø min: 3 mm • Crosswire Ø max: 8.5 mm • Cycles (transverse wires) max: approx. 120 • Max mat width: 2500 mm • Max nr. of longitudinal wires: 26 • Longitudinal wire feed: From coil • Crosswire feed: From coil • Longitudinal wire spacing: 100/150/200 mm • Crosswire spacing: 100-400 mm • Year installed: 2002 • Weight: ca. 30’000 Kg

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and Lhsdpsxvmamofx Ab Tec electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: good (used), Year of construction: 2003, functionality: fully functional, FULLY automatic mesh welding line SCHLATTER DOUBLE CROSS WIRE FEEDING / WELDING Model - MG320 Year - 2003. Line and cross wires from coils. Lhedpfoq Aumusx Ab Tsc

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Lsdpou Sb Dtofx Ab Tshc