Used Weld Line for sale (14,477)

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Nodpfxevtqacj Afzecl Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 Ncodpewu Tu Dsfx Afzel 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm Njdpfxjvtn H To Afzscl - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Ncodpfx Afewu Dcxjzsl Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, year of last overhaul: 2024, Four Corner Head Welding and CNC Corner Cleaning Line STURTZ SE - HSM 30/26 Compact. The whole line works properly and well. The equipment was operational up to its uninstallation. Nsdov Uzr Espfx Afzecl

Year of construction: 2021, condition: like new (used), Complete welding and polishing line in like-new condition Ncjdpfx Afox Irtfjzol

Year of construction: 2012, condition: excellent (used), ROTOX welding and cleaning line from left to right, consisting of ROTOX SMK 504 welding machine and EPA 472 cleaning machine with turning station, operated in single-shift mode, Windows control on both main machines, maximum welding dimension: 3,500 mm x 2,500 mm, currently programmed for VEKA profiles, 1 set of safety fences. Nsdjx Dy Tcspfx Afzjcl

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. Ncedpfx Ajx E Rd Dsfzol The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: excellent (used), Year of construction: 2000, Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth Ncsdpfxjwrpwie Afzsl The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working.

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Ncsdpfxevr U Syj Afzsl

Condition: used, Year of construction: 2001, functionality: fully functional, Year: 2001 - technically efficient, ready to work (directly from the client) Ncodpfxotr Dukj Afzjl - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station Nodpfxsxgqvtj Afzocl - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Ncsdpsvyqbmsfx Afzjl

Condition: excellent (used), Year of construction: 2005, pipe Ø 25 – 60 mm wall thickness 1 - 4 mm coil Ø max. 3.000 mm coil weight max. 10 t finish pipe length 3.600 - 8.500 mm round pipe Ø 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm speed max. 100 m/min working direction left → right The line consists of: decoiler Ncjdpfxouc Shue Afzel crop shear welding table edge trimmer with scrap cutter scrap conveyor strip edge preparation entry table forming part internal scraper/outer scraper cooling zone calibrating part testing and length measuring cutting ejector for reject pipes blow-off station oiling station bundle station banding station bundle extraction electrics

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming Njdpfouc Sw Aox Afzocl exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) - Nipple & spacer welding system (NIAH) Nsdpfev Edlvjx Afzjcl - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Year of construction: 2010, condition: excellent (used), Technical Details : - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit Ncjdpfx Ajfwm D Tefzsl

Year of construction: 2019, condition: new, Machine is designed for making panel welded meshes, width 2150 mm, length 6000 mm with distance between line wires 150 Nedsd N Hvqspfx Afzecl mm, with distance of cross wire from 25 to 300 mm and wire diameter from 4 to 8 mm. Basic parts of the machine: 1. Pay-off for line wire. 2. Straitening unit. 3. Line wire pooling unit with loop. 4. Welding unit. 5. Shear. 6. Turner with panel’s stacker. 7. Energy electrical cabinet. 8. Control cabinet. Machine is new !

Year of construction: 1990, condition: excellent (used), Technical Details : – Year – 1990/2012 Ncjdpfx Afod Sfgbezol – Model – 8/SR12 – Speed – max. 70 tact/min. – range of opening mesh space – 25×25 – 100×100 mm – Wire range – 1,5 – 5 mm – Number of transformers – 4 x 100 kw – Mesh width – max. 1200 m – Mesh lenght – 1000 – 3000 mm On line was made new control panel and transformers in 2012

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm Ncjdpfx Aolf Iqnjfzel

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Nedpfxsgqkpmo Afzocl

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off with haul-off with winder and guiding device Njdpfx Afei Tu U Ujzjcl

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Nedpsh Aiy Sjfx Afzjcl Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). Ncedpfsrfucfex Afzsl 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 2016, functionality: fully functional, USED COMPLETE BOTTLING LINE KHS 54,000 BPH Product: Still Water Speed: 54,000 BPH Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Preform Hopper Preform Elevator Preform Orientator PET Blow Molding Machine: Nsdpfxsx Urmxe Afzecl Chiller Labeling Machine 2 stations with roll-fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps Elevator Caps Orientator Bottle Inspector KHS Shrink Wrapper Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6x4 Only film KHS Palletizer Dual Robotic Arm Clamping, lifting Pallet storage Interlayer system KHS Pallet Wrapper Rotating arm Pre-stretch Code: NP 696