Mesh welding line

FROMA 8/SR12

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm Pgjdpjx E Eihofx Aklsp MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Pgjdpfx Akjw Rpvbslsp Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Laser diode 22726

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Podpfx Aker Nfvmjlegp Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Pedpfx Akjfifg Hsljgp Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140 mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool holder system (upper tools) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with worldwide applicable standards Electrical equipment, in accordance with worldwide applicable standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power 37 kW Oil tank capacity 250 liters Length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) Podpfx Akjy D T S Uslegp - Tool length compensation - Spray lubrication for punch - Punching scrap extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop Tools: 2x 10-function multitool 1x 5-function multitool 1x 5-function EeasyType multitool 5x thread forming tools 1x Multishear 1x calibration tool 1x ball deburrer 2x gills M3–M8 threading dies Centering studs (top and bottom) Countersinking tools for 1.5 and 2 mm Various countersink and form countersink tools

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 1590, Equipment: cabin, hydraulics, Zenith Machinenfabrik GMBH Neunkirchen/Siegerland GERMANY Used for production of concrete vibropressed pavement and borders. The machine is fully functional and it comes togheter with 2 mixers, bunkers for aggregates, skippers, packaging machine and 150 pallets for production. It also has included molds for different pavement models. We also have to sale a Mobil Zenith 941 II A from 1978 which also has the identification plate attached. The machine is beeing sold because it was replaced with newer techonology. Pgedpfx Asucruuokljp

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm Pgsdpfjw S Efzjx Aklsp x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Podpfew Hx Rzjx Aklsgp Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 2014, Ulma Taurus 300 traysealer Pgodpfxsvvk Hbe Aklep More information soon.

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Podpfxstrl Sks Aklsgp