Wire straightening machines for sale
4
wire diameter range: 1,0 - 4,0 mm
Cykrmzbm
cutting length: up to 3.000 mm
wire feeding speed: 5 - 90 mtr./min
wire diameter - max.: mm
wire diameter - min.: mm
wire length: mm
wire diameter - min.: 4 mm
wire diameter - max.: 12 mm
wire length: variable mm
control: Macsoft
total power requirement: ca. 10 kW
Weight approx.: 4,0 t
dimension machine xH: 1,9 x 4,2 x 2,0 m
transport measurements machine: 4,2 x 2,0 x 2,0 m
transport dimensions LxWxH: Haspel: 2,2 x 1,5 x 1,5 m
transport dimensions LxWxH: Bedienpult: 0,7 x 0,8 x 2,0 m
WIRE STRAIGHTENING AND CUTTING MACHINE with coil
The machine is currently pre-...
1
diameter range 3-10 mm
cutting length 2000 mm
Bexonvzxnc
speed - meters/min 120
Specification:
- Dimensions: 1300 × 950 × 1250 mm
- Weight: 440 kg
- 15kW motor
- Straightens and cuts to the desired length rods with diameter from Ø5 to Ø12 mm (possible operation with two coils simultaneously)
Bzk77xndev
- The length of the cut wire from 0.3 to 99 m
- Speed up to 30 m/min from 1 coil (total of two coils up to 60 m/min)
- Programming of length and quantity (straightening and cutting programs can be set)
- The rod unwinder is not included in the machine.
- The machine is suppli...
6
Wire range - 2 - 6 mm
Run out table - 1 m ( can be longer )
Speed - max. 90 /min.
El. Power - 8 kw
Automatic wire pay of - max. 800 kg
Machine is in very good condition and restored in 2017
M8vvn
4
wire diameter range: 3,0 - 10,0 mm
Fk0rvkdyw
cutting length: up to 6.000 mm
wire feeding speed: 23 - 130 mtr/min.
*machine is been repaired and new painted*
13
LINE FOR CUTTING AND STRAIGHTENING RE-BAR/REBAR.
Automatic line is designed for straightening and cutting of smooth re-bar diameter from Ø6mm to Ø16mm and ribbed re-bar from Ø5mm to Ø12mm, depending on machine type.
Except straightening, machine cleans re-bar from dirt and rust.
Complete line set consists of wheel for re-bar pulley, machine for straightening and reception desk for straightened re-bar.
Machine operates by principle of „flying bushes“ (rings).
Instructions for use line for cutt...
diameter range 0,5-1,6 mm
cutting length 350 mm
Ljs238zj
speed - meters/min 80
4
Straight and cut machine TECNOIMPIANTI
Novt7
Wire diam. range - 2- 6 mm
Max cutting length - 6.000 mm
Without decoiler
SOME EXTRA TOOLS
12
MEP-Omes FlexiPlus+CS40 in very good working condition.
Bdv8djcyo8
Year: 2007
Working hours in cycle: 1472h
Working hours of hidraulic unit: 5422h
9
- Dimeter range- 4-10mm
- Cutting lenght -2,0 m ,(possibly longer)
- Speed -90 m/min.
Bbjiqyj9kd
- Reconstruction- 2018
- Control - PLC Siemens
- Double mechanic pay off
3
wire diameter range: 1,0 - 4,0 mm
cutting length: up to. 2.000 mm
wire feeding speed: 5 - 120 mtr./min
Dwsf3e
Machines are used for straightening and cutting wire on the precise given length. Wire range is from 3 mm to 16 mm with speed up to 120 m/min.
-Easy for operating.
-Control system: Siemens, Yaskawa, ABB...
-Desk for finished wire up to 12m.
-Wire smoothing unit.
Mashtronics models:
IS-5: 3-5 mm
IS-8: 4-8 mm
Npivt
IS-10: 4-10 mm
IS-16: 8-16 mm
double wire processing
diameter range 0,8-2 mm
cutting length 1000 mm
speed - meters/min 80
Nzvkt
7
Straight and cut machine RAVNI (made in France)
Owdmp
Wire diameter - min/max - 1.5mm to 5,00 mm.
Max cutting length - 2 meters
With electrical cabinet
WITHOUT decoiler
The machine is fitted with tooling for 1.5mm wire and we I don't have extra tooling for this machine.
Complete technical documentation available.
The technical documentation is in French.
Machine is in good condition.
8
Dimeter range- 4-10mm
Cutting lenght - 2,0 m ,(possibly longer)
Speed -90 m/min.
Reconstruction- 2018
Cfrrvcj
Control - PLC Siemens
Double mechanic pay off wire
6
wire diameter range: 4,0 - 10,0 mm
cutting length: max. 5.000 mm
Emd7gpwnq
wire feeding speed: max. 80 mtr./min
1
wire diameter range 1,5-7,0mm
Bzpk0qz8ro
cutting length 1.000 mm
speed - meters/min 5-120
10
Straight and cut machine with MAX cutting lenght - 15 meters
Brand - WAFIOS
Year - 1997.
Min/max wire diam. - 4- 10mm
Max speed - 130 m / minute
Max cutting length - 15 meters
Motor - 35 kW
Air pressure - 6 bars
Approx. weight - 4.000 kg
Bhljvfe2qq
3
Diameter range- 1-4 mm
Cutting lenght - 2 m
Speed - 60 m/min.
Chagv22y
Reconstruction- 2016
*More pictures and video at the customer's request*
3
wire diameter range: 1,0 - 4,5 mm
Bmmmuj7tnx
cutting length: up to 3.000 mm
wire feeding speed: 13 - 56 mtr./min
1
for electrodes
Bvxf8tl0mg
diameter range 1,6 - 3,0 mm
cutting length 250-1050 mm
output - pieces/min max. 400 cuts/min
9
Straight and cut machine VITARI model NR-230.
In a good technical condition, fully working.
Technical data:
Year of manufacture: 1996
Wire diameter range: 4 - 10 mm for Rm <800 MPa
Cutting length range: 250 - 3000 mm with standard measurement (at least
60 mm at continuous cutting)
Wire straightening speed: 30 - 130 m/min
Max. Number of cuts/min: 150 with standard measuring, 300 with
continuous cutting
Total input: 21 kW
8nphzvb0h
Weight: 2500 kg
Dimensions: 1500 x 5500 mm + MOTORIZED unwin...
9
Technical Details :
- Speed - 90 m/min.
- Power - 20 Kw - two engines
- Recondition - 2018
Bdexhqgvsr
- Run out table - 6 m
- Wire Range - 2- 12 mm
- Cut unit - flying knives
4
wire diameter range: 1,5 - 7,0 mm
cutting length: up to 1.000 mm
wire feeding speed: 23 - 90 mtr./min
Bmrlhbtkr2
*complete with Wire pay-off DH 1000*
1
diameter range 1-8 mm
cutting length 3000 mm
Bo02dfeibo
speed - meters/min 13-56
6
Straight and Cut Machine WAFIOS RS4, Min-Max. wire diam. – 4 – 10 mm,
Dky3tz7fg
Max. Cutting length – 5200 mm, Motor Power – 15 kW , Speed – 90-120 m/min
Machine Weight – approx.. 2500 kg.
6
Dimeter range- 3-10mm
Wsvgeow2
Cutting lenght -4m ,(possibly longer)
Speed -90 m/min.
Reconstruction- 2016
Control - PLC
5
wire diameter range: 6,0 - 14,0 mm
wire feeding speed: 23 - 90 mtr./min
V0wjo2y
cutting length: up to 4.000 mm
1
diameter range 1,5-7 mm
cutting length 3.000 mm
Obg9n
speed - meters/min 19-50
4
Staright and cut machine WAFIOS
Wire diam. - 2 - 6mm
Max. cutting length - 3 meters
With decoiler
Bayaohvbbu
Technical Details :
Bie3yaikq7
- Speed - 120 m/min.
- Power - 25 KW
- Run out table - 6 m
- Wire Range - 4-12 mm
5
*Machine is been repaired, tested and new painted*
wire diameter range: 4,0 - 10,0 mm
Iga97nzh
cutting length: up to 4.000 mm
wire feeding speed: 90 / 120 mtr./min
1
diameter range 5-12 mm
cutting length 6000 mm
speed - meters/min 23-36
F0be8ixh
11
Min.-max. wire dia. 6 to 14mm (.236″ to .551″)
Flying shear
(5) indexing rotary arbors
(4) pre-feed rolls
80 to 120 mts/min
Max. cutoff lgth: 15 meter track
Indexing wire/rod collector
30kW (40HP) AC motor
Hydraulick motor: 15 kW (20HP)
Trq2tvs7
Operators control panel; 380V- 50 cycle – 3ph
PLC Control SIMENES S 5
3 vertical payoff units
Completely refurbished machine
3
wire diameter range: 1,5 - 7,0 mm
cutting length: max. 2.000 mm
wire feeding speed: 5 - 120 mtr./min
3kypgwvde
* machine is been complete new painted*
1
diameter range 3-16 mm
cutting length 2 m
speed - meters/min 18-139
Bivvvbr3cp
6
wire diameter range: 1,5 - 7,0 mm
Gsw3rykb
cutting length: up to. 3.000 mm
wire feeding speed: 29 - 90 mtr./min
1
diameter range 1-8 mm
cutting length 3000 mm
N09thven
speed - meters/min 13-56
5
wire diameter range: 1,5 - 7,0 mm
Biw8fx70wo
cutting length: max. 4.000 mm
wire feeding speed: 40 - 80 mtr./min
*complete with Wire pay-off WEBER DH 1000*
double wire processing
diameter range 0,8-2 mm
Bivvvldbwq
cutting length 1000 mm
speed - meters/min 80
3
wire working range: 0,1 - 1,3 mm
cutting length: 5 - 70 mm
output: 400/min.
complete with ciller and
3itzsxn8
motorized decoiler
diameter range 7-14 mm
cutting length 3000 mm
speed - meters/min 90
Bjxzl7y3jv
1
wire diameter range: 8,0 - 16,0 mm
Vqb8ln9d9
cutting length: up to 14.500 mm
wire feeding speed: up to 50 mtr./min.
*Machine is been repaired, tested, new painted, + new Electric*
1
diameter range 4-10 mm
cutting length 3000 mm
Bexonmirzb
speed - meters/min 130
3
wire diameter range: 2,0 - 6,5 mm
cross section for profil wires: max. 35 mm"
Dsgz00x
cutting length: up to 500 mm
wire feeding speed: 18 - 25 - 36 mtr./min
*suitable for Round- Profil- and Flatwire*
double wire processing
diameter range 0,8-2 mm
cutting length 1000 mm
Bo02f080vx
speed - meters/min 80
6
wire diameter range: 1,5 - 7,0 mm
cutting length: max. 2.000 mm
2qfdlkzk
wire feeding speed: 29 - 90 mtr./min
1
diameter range 1-4 mm
cutting length 1000 mm
C39tlblq
speed - meters/min 69