Used Wire Straightening Machine for sale (66,581)

Condition: used, Year of construction: 1971, Coiler/straightener unit manufactured by SCHLEICHER, type RM-S 300 / H 2. Press force approximately --- tons. Year of manufacture 1971. Structured summary – a full technical translation will follow if required for this lot. Bwslozyncwshcdw Hst

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos Beloin Rn Ajhcdw Hjwt -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: excellent (used), Type ER 9-0.8, wire range 0.5-0.8 mm Bjlszvdc Eehcdw Hswt as-new devices, several available.

Condition: ready for operation (used), A Wafios wire straightening and cutting machine with a straightening attachment of 1000mm is available. Wire diameter range: 1.5mm-7mm, cutting length range: 20mm-3000mm, straightening rotor speed: 6800rpm, pitch: 71/69, cutting stroke: 270/min, machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 1400kg. An on-site inspection is possible. Bjlhcdeyvuuzsw Hjwt

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Bslezqu Hqohcdw Hswt

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Bolhcszczvdsdw Hswt Good condition

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Bwsljim Ittehcdw Het

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min Bslhcezv En Ajdw Hjwt V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER RENISHAW MACHINE MANUALS

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Belhcdwozymyno Hjwt Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 1998, machine/vehicle number: 8.2259/355138, This Charmilles Technology wire erosion machine is being auctioned off online as part of our industrial auction / machine auction follow-up auction by J&S GmbH Automotive Technology - Machine Park. Bjljzyf R Ejhcdw Hjwt You can find this and many other items on our platform.

Condition: good (used), Year of construction: 2001, - Number of axes: 5 - X-axis travel: 350 mm - Y-axis travel: 250 mm - Z-axis travel: 256 mm - Voltage: 3 × 400 V - Frequency: 50 Hz - Power: 9 kVA - Rated current: 15.2 A - Workpiece size is limited to 750 x 550 x 256 mm and 400 kg No documentation available. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices exclude VAT. Bwjlhcdozxq Iyew Het Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality, yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please use the contact form.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 240 SL Year of manufacture: 2004 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed of 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete system: 2020 x 2050 x 2000 mm Total weight of the system: 2450 kg The machine is currently in use at our customer's site and will be available from September. Belhcdwszwv S Ie Howt We would be pleased to offer the following services: - Cleaning and overhaul of the machine - Commissioning and training - Delivery - Clamping devices - Cooling unit - Transport

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, wire working range: 0,1 - 2,0 mm cutting length: 5 - 50 mm Bwjlhozwdggjcdw Hot output: 600/min. complete with ciller and motorized decoiler

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, total height: 2,600 mm, total length: 1,940 mm, total width: 2,300 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 3,460 kg, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup Bslhcdozwl R Hjw Hewt AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned, overhauled, and tested at our facility after receipt of your order. We would be happy to perform a customized test cut for you. You will receive a warranty of 6 months on all machine parts. We would also be happy to offer commissioning and training.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Belhcdew Ucyujw Howt Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Bwelhcdjxx Uatew Het Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Bjlhcdezycakew Hswt Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, workpiece weight (max.): 35 kg, travel distance X-axis: 220 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 100 mm, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2014 Travel distances (X/Y/Z): 220 x 160 x 100 mm Travel distances (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter from 0.05 mm to 0.20 mm (including option KIT 50) Best achievable surface finish: Ra = 0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handheld control unit for convenient machine setup 15" LCD color screen with jog wheel and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Bslhcozvx S Isdw Howt Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2700 kg After receiving the order, the machine will be cleaned, fully overhauled, and thoroughly tested by our specialists. We will gladly put the machine into operation at your facility and provide training on the control system and machine operation.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm Bwslhcdszgu Igew Hjt max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,790 mm, total width: 2,020 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, overall weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of manufacture: 2019 Wire erosion machine with automatic wire threading Bwslhcjzvf Ddjdw Hst Travel ranges (X/Y/Z): 600 x 400 x 350 mm Travel ranges (U/V): +/- 50 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 1030 x 800 x 350 mm Max. workpiece weight: 1000 kg Excellent surface quality for hard metal/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 2020 x 2790 x 2320 mm Total weight without dielectric fluid: 4440 kg The wire erosion machine will be cleaned, serviced, and thoroughly tested by us after the order is received. We can also perform a test cut or a live demonstration beforehand. Commissioning and training can also be carried out by us. Optionally, we offer the following: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: good (used), Year of construction: 1989, functionality: fully functional, pressing force: 30 t, We offer this good Bihler GRM 80 punching and bending machine, year of construction 1989. with 5 slides, 30T press, straightener, feeder Belhcdweywty Ee Hjwt with decoiler Tooling is not included If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Bjlozu N Abshcdw Hswt Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights Bslsymf Ilehcdw Hjwt - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories Bwslheymf Nvjcdw Hot - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", Bwslheymf Skscdw Hjt by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.