Used Wire Straightening Machine for sale (65,935)

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 Gsdpfx Ahjw N D Suenjbn line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Gbedpfetndgpex Ahnjn

Condition: used, Year of construction: 1989, Model - 600/6 Gsdsyubh Repfx Ahnobn Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Year of construction: 1997, condition: refurbished (used), Technical Details : - Speed - 90 m/min. Gbedpfxjdz S Tvo Ahnon - Power - 20 Kw - two engines - Recondition - 2018 - Run out table - 6 m - Wire Range - 2- 12 mm - Cut unit - flying knives

Year of construction: 1980, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-14mm Gedpfx Ahohqfl Ajnjbn Cutting lenght - 8,5m Speed -70 m/min. Reconstruction- 2022

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Gedpfer Nfvmsx Ahnsbn Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1979, condition: used, Dimeter range- 3-10mm Cutting lenght -4m ,(possibly longer) Speed -90 m/min. Reconstruction- 2016 Gedpecv A I Njfx Ahnobn Control - PLC

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Gjdpfx Ajfkmr Sjhnjbn Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Godpfx Asmqk Tpehnebn Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Year of construction: 1985, condition: used, Wire range - 2 - 6 mm Run out table - 1 m ( can be longer ) Speed - max. 90 /min. El. Power - 8 kw Automatic wire pay of - max. 800 kg Machine is in very good condition and restored in 2017 Gbjdpfx Asdqubqjhnon

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Godeh In Thspfx Ahnobn Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Gedpfxjn Ut A Ss Ahnsbn Production year: 1997

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Gbodpjy Eyzfjfx Ahnon Most units are from the manufacturer Witels Albert, but there are also other brands available. The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Gbjdpfxeyxfqre Ahnen Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Gbedpfezbat Sox Ahnen Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Gjdpowzyvhofx Ahnebn Year 2005

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 Gedpfx Ahoyvfy Tenjbn straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Gbedpfxovgbgas Ahnen Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Gsdpfxsu Ic Ave Ahnjbn Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Technical details: sheet width: 153 mm Gjdpfx Aheu Ic Eksnjbn material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t Gbodpfeu Ic E Rox Ahnon space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. *

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, year of last overhaul: 2012, Basic information: Control system: Siemens S7-400 Technical details: Material processed to date: Steel wire Number of drawing steps: 12 Technical condition: New electrical system in 2012 Maximum inlet wire diameter: 4 mm Minimum inlet wire diameter: 3 mm Maximum finished wire diameter: 1.3 mm Minimum finished wire diameter: 0.78 mm Gbsdpfszb N Rasx Ahnsn Maximum inlet wire tensile strength: 1225 N/mm² Number of blocks: 12 Block axis: vertical Drawing die diameter: 450 mm Drawing die thickness: 43 mm Drawing die diameter: 27 mm Water pressure: min. 2 bar Control method between drawing dies: Guide rollers Air pressure: 6 bar Drawing die cooling: Water Drawing die cooling: Water Drive type: Three-phase motor Motor manufacturer: SIEMENS Drive power: 22 kW Motor controller: Siemens Sinamics Operating voltage: 400 V Frequency: 50 Hz Electrical cabinet: present Guide rail: present Production direction: from left to right Consisting of: KOCH unwinder KOCH dancer KOCH KHS 800 S single spooler

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm Gbsdpfx Ahet Hmk Tjnen coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Condition: repair required (used), functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Gbedpfozcm Dgsx Ahnon Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm ENGLISH: Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm Gbedpfoh Ra Spox Ahnen feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable.