Used Pvc Line for sale (10,241)

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Fjdpfxovryhys Afnefu Elmepla saw Battenfeld R200/6 Battenfeld V125

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Fsdpfxoyhcabo Afnefu Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Fjdpfx Asyhckaofnsfu Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves Ffodpfx Ajya Eldefnou • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Ffodpfjxzzxbex Afnou Frame discharge unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

Year of construction: 2019, condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Consisting of: Double Mitre Saw DS-110/3.5M End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Ffsdpeux Aqsfx Afneu Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Year of construction: 2017, condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Fsdpfxjux Ads Afnjfu Glazing Bead Cutting Saw GLSM-200E

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Ffodpfew Ahfgsx Afnou Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. Ffjdpfx Aoil Agnefneu The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm Ffsdpfxeiryd Us Afnsu plus two new Gamma pistols.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 Ffjdpfx Afowyvh Ronsu (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)

Condition: used, Year of construction: 2016, functionality: fully functional, USED COMPLETE BOTTLING LINE KHS 54,000 BPH Product: Still Water Speed: 54,000 BPH Year: 2016 KHS INNOPET BLOWFILL MONOBLOCK Preform Hopper Preform Elevator Preform Orientator PET Blow Molding Machine: Chiller Labeling Machine 2 stations with roll-fed PE modules Direction of rotation: counterclockwise Electronic cam plates Filler Capper Type of workable cap: pre-threaded plastic Distribution system: pick & place Caps Elevator Caps Orientator Bottle Inspector KHS Shrink Wrapper Model: Innopack Kisters SP Version: film launch 6 Lanes Bundle 6x4 Only film KHS Palletizer Dual Robotic Arm Clamping, lifting Pallet storage Interlayer system KHS Pallet Wrapper Rotating arm Pre-stretch Ffodpfx Ajx Urmxsfnju Code: NP 696

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Ffsdpfx Ajtiy Ntsfneu Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS Ffjdpothg Dijfx Afnou LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 1,000 mm, table length: 5,000 mm, table width: 2,000 mm, CNC Gantry Milling Machine Forest Line Seramill 240T – Robust & Precise For sale: Forest Line Seramill 240T CNC gantry milling machine, year 2000 – used, in excellent condition. Perfect for machining large workpieces with high precision. Key Features: Robust gantry design for maximum stability Accurate Siemens 840D control Large working area: 5,000 × 2,000 mm Travel: X 5,500 mm | Y 2,900 mm | Z 1,000 mm | A ±135° | C ±180° ISO 50 spindle, max. 6,000 rpm Fjdpfjyfpkbjx Afnefu Ideal for series production and individual parts Perfect for carpenters, furniture manufacturers, and production workshops that want to machine large parts precisely. Available immediately! Contact us for details, photos, or a viewing.

Condition: ready for operation (used), Year of construction: 2016, Stainless steel kneading bowl Manufacturer - Bago-Line/Sottoriva. Model - Twist 90/1. Year - 2016. Voltage - 3x400V. Electric power - 6.5kW. Fedov Twgpopfx Afnofu Water dosing included. 90 liter kettle. CLH.24

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h Fodohgbarepfx Afnsfu We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Features: * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Technical Data: Manufacturer: SRD Ffedpfjyfgp Usx Afnou Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm Fodpjdkf I Tjfx Afnjfu -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 294144, Our SMD assembly line consists of top-tier brands. It's in mint condition, hasn't performed any work except for periodic on-off operations. You can have it serviced as needed. It's a complete package, with not a single scratch. Ffsdpfsw H Tuaox Afnou Our production line can assemble all electronic boards. This product is a perfect opportunity for those looking to start a new business.

Condition: used, Year of construction: 2006, functionality: fully functional, NP 690 - COMPLETE GLASS BOTTLING LINE SIDEL 46,000 bph Product: Mineral Water Speed: 46,000 bph Depalletizer Simonazzi Model: SWEEP-OFF-B Year: 2005 Type: with layer separator Interlayer removal system Pallet storage Saturator Simonazzi Model: CARBOGEA Year: 2005 Speed: 9,800 lph Filling Monoblock Simonazzi Model: EUROSTAR 2000 Year: 2005 Rinser: 84 clamps, fixed nozzle, treated product: water Filler: 84 valves, isobaric filling, mechanical valves 2 Cappers: - 24-head crown cap Ø 26 mm - 24-head aluminum screw cap Bottle Inspector Heuft Model: HBBVXTXXX Year: 2011 Level and cap integrity check Labeller Simonazzi Model: ALFA TOP BRAIN Year: 2005 32 heads, 3 cold glue stations Applicable label types: • Front • Back • Neck/collar Label Inspector ABULL Model: STRATEC - F300 Year: 2005 Shrink Wrapper SMI Model: SK800F Year: 2005 Version: film only Type: film only Double-lane for 3x2 bundles Fsdpfeyc Rw Dex Afnjfu Shrink Wrapper SMI Model: SK600P Year: 2005 Version: film with tray Types: film and tray 20/24 pcs (4x6) Palletizer Simonazzi Model: KOMBI Year: 2005 Type: push-type palletizer Interlayer system Pallet storage Pallet Wrapper ROBOPAC Model: ROTARY Year: 2005 Wrapping type: rotating arm Bottle conveyor belts Bundle conveyor belts

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S Full Otomatik Alüminyum Pvc Çift Kafa Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø550 mm saw. - Complies with CE standards. - Hydro - pneumatic hydro-check controlled saw movement - Cutting accuracy +/- 0.1 mm Fedpfx Aferamypsnofu - Automatically adjusts to two inward angles of 90 and 45 degrees - Automatic slicing at 90 degree angle - 10" touch color panel display - Remote connectivity and technical support - 2 Ø550 mm saws - Servo motor motion system - 180 mm saw exit distance and cut 80 mm x 2 profiles - Hydro-check saw speed adjustment - 8 meter cutting feature - Multi-language support - Unlimited size capacity - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Data transfer via USB memory

Condition: ready for operation (used), Year of construction: 2003, Complete Tetra Pak line TBA 21-1000 Slim, includes: 1. TBA/21 1000 Slim filler, V050, YOM 2003, 52.000 running hours 2. CAP30 cap applicator for Helicap23 Pro26 3. Easy Ride Terplus cartons accumulator 4. TCBP70 wrap around packer 5. Conveyor system Ffodpfoycwvaox Afneu 6. Conveyors system The line is in very good condition, still in production till April. Can be sold without CAP30 applicator.

Year of construction: 2025, condition: new, machine/vehicle number: ALÜMİNYUM İŞLEME CİFT KAFALI MAKİNE SETİ, - Provides 80 - 120 window production in 8 hours working environment. - It is our set that provides fast production to the customer with different machine options. - 380 volt or 220 volt options are available. - Complies with CE (European) standards - Prices delivered to anywhere in the world - Former customers from your country who will be your reference MACHINE CONTENT - SC 4000 S Full Automatic Servo Motor Double Corner Aluminum & PVC Cutting Machine (Ø550 mm saw) - SC 5000 S Aluminum & PVC 3 Axis Cnc Milling Machine - SC 211 Aluminum & PVC Center Register Lapping Machine (2 Blades) - SC 902 S Hydraulic Aluminum Corner Press - 2 Year Warranty Ffodporfy Exefx Afneu - There is no program fee for CNC Machines and remote profile introduction is available.

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position - Pneumatic profile clamping system Ffsdpfx Ajra Nrqsfnsu - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor