Used Pvc Line for sale (10,198)

Condition: used, Gainsborough bagger and All-Fill powder depositor. Fodpfx Ajvvpphjfnopc

Condition: good (used), Accumulation table recently removed from honey jar filling line. Fpedpfx Asu Indrefnjc

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant Fedpsu Nu Nkefx Afnepc in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles Fpsdpeyhqa Aofx Afnsc No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: used, Automated Fishing Bait Boilie Line with Stainless Steel Eurobin Lifter for adding Dough into the Extruder, Steel Safety Caging and Safety Interlock Platform, (2) x Eurobins allow filling in Batches, Kilia Extruder capable of large outputs, features additional Guarding on the top of the Extruder to ensure safety with use of the Eurobin Lifter. Extruder Serviced Bait Tools Rolling Machine, which forms Dough Balls in sizes between 12 and 24mm (additional options of sizes available from Manufacturer) built in Cut-off for Waste Dough to be re-used and reduce need for Manual Monitoring, Dual Direction PVC Infeed Belt ensure less marking of product in Soft Dough Stage products then move to the Boiler Unit. This has Variable Speed Belt and PLC Connection to Gas System for Timing and Temperature Regulation. All automated and capable of maintaining High Infeed Dough Quantity, Post Cook Outfeed Perforated Belt with 6 Fans Array for increased drying of product, Belt can be varied in speed to suit requirement, Belt terminates into Cassette Tray Filler. Fills to required weights of 9kg (this is variable) further Array of Fans below Tray Drying Line to further dry the products. Machine capable at highest rate 600kg per hour of Finished Products, Waste Quantity when set up correctly yields less than 0.5%. Fodpjyil Easfx Afnepc Location: These lots are located in Burnham-on-Crouch, Essex, UK.

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2024, fuel type: diesel, overall weight: 2,940 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,474 mm, total height: 2,499 mm, loading space length: 2,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 88207 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable - with integrated turn signals * Radio: Ford audio system with 4-inch multifunction display - Connected Radio - DAB/DAB+ - FordPass Connect - 4 speakers, antenna - Integrated control panel and steering wheel audio remote control - Bluetooth, USB port, and hands-free system - Emergency call assistant * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Fold-out table integrated into double passenger seat - Heated seats for driver and passenger - Inner armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology Package 10: Heated windscreen - Rain sensor wipers - Front and rear parking pilot system - Active emergency braking assistant (camera-based) - Lane keeping assist with fatigue warning and high-beam assistant, additionally with lane keeping system - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image display on multifunction display - LED downlight - Fog lights * Würth conversion: steel module block - vehicle floor panel - side wall lining ADDITIONAL EQUIPMENT * 1 battery * Driver’s airbag * Anti-lock braking system with electronic brake force distribution incl. ESP with traction control - Hill start assist - Crosswind assist - Emergency braking assistant - Rollover protection - Emergency brake support incl. emergency brake light * Battery: battery runtime, programmable for 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Rear double-wing doors with 180° opening angle (without window) * Front power windows with quick down/up function for driver's side * Ford Easy Fuel * High-capacity alternator * Lockable glove compartment * Interior lighting with delay function and front reading lights * Front air conditioning incl. dust and pollen filter * 70 l fuel tank * Cargo area lighting * Steering wheel: synthetic leather steering wheel * Steering column adjustable for height and reach * MyKey key system * Emergency call assistant * Particulate filter: diesel particulate filter * Wheels: wheel trims * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Headlights: halogen dipped headlights with daytime running lights * Sliding door entry light, automatic when door is opened * Sliding door, right * Rear mud flaps * Side protection strips * Power steering * Seat belts - Pre-tensioners and force limiters for front seat belts * Start-stop system * Rear bumper with integrated step * Partition wall (plastic) at B-pillar height Fpjdpox I T Rxefx Afnoc * Air recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted windows * Central locking with remote control * Second remote control key * Overhead storage compartment at the front ... and much more.----1st owner. German specification. Errors and prior sale excepted. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle in trade-in. Financing/leasing available with zero down payment! Do you have any questions? We are happy to advise you! Despite existing checks, a deviation of the vehicle from the above

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Fodpfx Afjw Nriujnopc Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 The capsules are produced as free-falling parts.

Condition: good (used), Complete line available which was producing toffee apples for the leading producer in England. Toffee apples and candy apples were supplied to several leading supermarket chains. Line consists of cooking vessels for the toffee, robotic pick and dip lines to insert the sticks into the apples, pick them up, dip them in the toffee and then place them onto the cooling belt then the products are conveyed into flowwrappers. Videos available upon request. Fsdspitkkjpfx Afnepc

Year of construction: 2018, condition: excellent (used), Complete powder packing system for manufacturing and filling bags up to 10kg. The plant was purchased in 2017/2018 and has only been used very lightly (approx. 60 tonnes in 2024). The system comprises of the following equipment: 1 x Entecon AMC blower conveyor with control box. 1 x Busch vacuum lifting system. Model - SB 0310 D 0H0 UH XX. 1 x Fluidiser with high and low level probes. 1 x All-Fill powder auger filler with agitator and outfeed tube. Model - S10. 1 x Gainsborough Engineering Co. GV4 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 430mm (horizontal) and 600mm (vertical). Current film - 840mm wide. Used to produce 400mm wide bags. 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm. 1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 30kg. Type - HC. Weigh table dimensions - 800mm long x 60mm wide. 1 x Declined roller conveyor on height adjustable feet, all stainless steel. Roller bed width - 800mm. Overall dimensions - 1210mm long x 880mm wide x 870mm high (+130mm max). Fsdpfx Aswa Ilhofnepc *Please note - if you require a metal detector for this line then please enquire with us, we can supply a suitable unit* Please contact for more details and to arrange a viewing.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 Fedpfxeu Tp N De Afnspc total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Fodpfxju Tg I Ds Afnspc Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: Fsdpfx Aorf Ty Sjfnopc length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: Fpodpfx Asia Nypjfnjc - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S Fpedpfx Aemv Ehzefnoc - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: like new (used), Automatic line which has been used for producing 2 million toffee / candy apples over 6-8 week period. Complete lines available, to manufacture the toffee sauce, melt the chocolate, fire sticks into the apples and robotically dip them in sauce then flow wrap the finished product. Fedpfxshtv Uwe Afnepc

Condition: good (used), Year of construction: 2011, Weinig Conturex C4500 CNC Window production machine Description; Year of construction: 2011 Working width 25-260mm Working heigth 10-150mm Powergrip clamping table 3.000 mm Workpiece length 180-4500 mm First processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Fjdpfx Ajydkzxsfnepc Second processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Powergrip outfeed Tool warehouse 110 positions (87,5 mm distance) Waste conveyorbelt Full description on request Available approx. wk 30/31 - 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Fälzelgerät - Back Lining Machine MATADOR 11b Fpsdpjh Axzzofx Afnjc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Fälzelgerät - Back Lining Machine Maior BLM Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fodpfx Afjh Axz Tenjpc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1980, machine/vehicle number: 558, Buchstraße-Hardcover / Casing In Line Kolbus BF 40TYear 1977 - Serial-No. 558 Format / Size min. 100x125mm - max. 270x365mm Buchblock Dicke / Book block thickness 6 - 70mm Leistung / Mechanical speed max. up to 40 Takte/min.Buchstraße Ausstattung / Casing in Line consists of: Fliessdreischneider / Three knife Trimmer Wohlenberg Modell 44 Rundungsstation / Rounding Station Hinterklebestation für Gaze Kapitalbandstation / head-tailbanding and backlining station Deckenanleger / Case Bending Station Falzeinbrennstation / Pressing Unit Kolbus FE Pressing Stations with Heated Joint Forming Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fpjdpfxenug Enj Afnsc On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINEYear 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fedpfx Ash Ayarofnopc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2004, machine/vehicle number: 7441238, Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE Schneidlinie Lift Rüttler Ablader / Cutting Line Lift Jogger UnloaderYear 2004 - Serial-No. 7441238 Schnittbreite / Cutting width max. 1370mm Autotrimm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10AStapellift / Stack Lift Polar LW 1000-4 Baujahr / Year 2004 - Serial-No. 7493313 Palettengröße / Pallet size max. 800 x 1.200mm Wannengröße / Size of platform 840 x 1.270mm Hub / Stroke max. 850mm Tragkraft / Carrying capacity max. 1.000kgRüttelautomat Luftausstreichwalze / Automatic Jogger air-removing roller Polar RAH-4 Entladung zur Hintertischbeschickung / unloading for rear-table feeding Baujahr / Year 2004 - Serial-No. 7484103 Tischgröße / Size of table 900 x 1.150mm Fodpsiqvbmefx Afnepc Ausschiebeformat / Pusher size . 750 x 1.140mm Lagenhöhe / Height of ream min. 30mm - max. 140mmStapelregal / Piling-board shelf Polar STR-1000-4 Baujahr / Year 2006 - Serial-No. 7475003 Format min. 420 × 570mm - max. 750 × 1.140mm Größe Regalboden / Size of shelf board 900 × 1.170mm Lagenhöhe / Height of ream min. 30mm - max. 140mm Tragkraft / Carrying capacity max. 600kg Anzahl Pufferplätze / Number of buffer spaces 5Ablader / Unloader Polar TR 130ER-4- Einsatzbereich / Application for Size min. 400 x 400mm - max. 780 x 1.120mm Nutzengröße / Label size min. 105 - 148mm Lagenhöhe / Height of ream min. 40mm - max. 165mm Stapelhöhe / Pile height max 1.300mm Tragkraft / Carrying capacity max. 200kgSpäneförderband / Waste Conveyor Busch Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Fälzelgerät / Back Lining Machine Schmedt  Fälzelgerät Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fpedpfx Astzc I Dsfnsc

Condition: used, Year of construction: 2003, Rüttler mit Ausstreichwalze - Jogger with air removal rollers Schneider Senator Profi-Line 0077Year 2003 - Serial-No. P-7359003 Format / Size max. 790 x 1090mm Platzbedarf / Space required 1370 x 1700mm Einsatzhöhe / Infeed high 165mm CE-Zeichen-Zulassung / CE Certificate Fjdpeh Aya Dofx Afnopc Elektr. Anschluss / Power supply 3 Phase 380V - 1,75/2,2kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Machine used for pasteurization vegetables. Fsdjrwn Hbjpfx Afnopc

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus Fpedoyddfdjpfx Afnjc If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.