Used Pu for sale (1,424)

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Ibjdpfxju Eviqj Ap Dsc

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, We are offering this ready-to-use HOMAG KR 79/02/PU/S2 edge banding machine, manufactured in 1993. Manufacturer: HOMAG Type/Model: KR 79/02/PU/S2 Year of manufacture: 1993 Ibsdpfx Aszwunbjp Djc If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE Iodpfx Ast Nfarjp Dsbc

Condition: used, PPM Rotary Lobe Pump Model LH84L - 4981 PU Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Port size - 90mm flange Ibjdpjz E Iawsfx Ap Dec

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new DEVELOPMENT OF GSG ROBOTICS Iodpfx Apjz Tadlj Dsbc GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed Isdpfezib Nisx Ap Dsbc complete tool equipment included first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Year of construction: 2011, For inquiries regarding attachments, Mr. Herden will be happy to assist you (tel. ). Pronar PU-1700 Snow Plow / 2011 / up to 1,930 mm working width Price: €1,990.00 net / €2,368.10 gross - Clearing width depending on operating setting: 1,680 mm / 1,930 mm - Operating settings: 4 - Scraper bars: Deflectable, made of rubber - Scraper bar shock absorption: on springs - Hydraulic control: 16-20 MPa - Power supply for boundary lights: 12 V - Working speed: 10 km/h - Power requirement: 25-55 hp - Own weight: 355 kg Iedjznrpkepfx Ap Dsbc In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are the official Westtech sales and service partner. We are the official OilQuick sales and service partner. We are the official Holp sales and service partner. We are the official Magni telehandler sales and service partner. We are the official DMS sales and service partner. We are the official Gierking GMT sales and service partner. We are the official Weber MT sales and service partner. We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 1375 = Further information = Intended use: Agriculture Unladen weight: 355 kg Working width: 193 cm Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 132 kW (179.47 HP), Price available upon request. The machine is in operational condition. Iodpfszc E Hyex Ap Djbc

Condition: good (used), Year of construction: 2014, Description: The machine is in good technical condition, and a test run is possible upon prior arrangement. It is more suitable for serial production; it also includes a feeder and an output belt for finished parts. It comes with accessories – 2 universal chucks, clamps, and holders. Parameter PUMA MX 1600 ST Max. machining / turning diameter: 330 mm Recommended turning diameter: 170 mm Max. machining length: 900 mm Diameter over bed: 680 mm Diameter over carriage: 630 mm Bar diameter: approx. 51 mm Standard chuck: 6" Main spindle – speed: 6,000 rpm Main spindle – power: 15 / 11 kW Max. torque of main spindle: approx. 208 Nm Spindle nose: A2-5 Tailstock – speed: 6,000 rpm Tailstock – power: 15 / 11 kW Tailstock – nose: A2-5 Milling spindle: 12,000 rpm Power of milling spindle: 9 kW Ijdjz S Hnhopfx Ap Debc Torque of milling spindle: approx. 49 Nm Y-axis: 170 mm (??85 mm) B-axis: ??120?? / range 240?? X1: 450 mm Z1: 935 mm X2: 165 mm Z2: 925 mm Tool magazine: 40 positions Max. tool Ø: 70 / 95 mm Max. tool length: 200 mm Tool change time: approx. 2.1 s Lower turret: 16 positions, BMT45 Driven tools of lower turret: 6,000 rpm Power of driven tools: 5.5 kW Control system: Fanuc 31i-A Weight: approx. 11,600 kg Dimensions: approx. 3,800 × 2,530 × 2,760 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 2,600 h, ABB IRB4600-45/2.05 robot and IRC5 controller-TPU-RW6.X Ibjdez Tab Depfx Ap Doc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Ibedpfx Apsz Hxc Ej Dec Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, sheet thickness (max.): 6 mm, CNC punching machine manufactured in 2012. This TRUMPF TruPunch 3000 features a punching force of 18 tons and a maximum sheet thickness of 6.4 mm. The working area measures 3,000 x 1,500 mm, making it suitable for various applications. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Working area: 3,000 x 1,500 mm • Configuration: Stand-alone • Condition: Fully functional • Tooling: Not included • Reason for sale: Seller is switching to a laser combination machine • Note: Sold without tooling Ibjdpfx Asz Szgljp Doc

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1300-7 /1.4 + Omnicore C90XT + TPU DEMO ROBOT DEVELOPED BY GSG ROBOTICS Ibjdpoz Tacuofx Ap Djc GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 + Controller + TPU DEMO ROBOT, as new Isdpfx Aoz Taf Aop Djbc DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, offering a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new Ibodjz Taggopfx Ap Dec DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Colour: Green Empty weight: 3.500 kg Price: On request - Transport weight [kg]: 3500kg Ijdpfx Aez Ngv Hep Debc Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2011, Edge processing line HOMAG, consisting of: - Infeed system for longitudinal and transverse parts - One HOMAG edge banding machine with LASER GLUING - Transfer station for longitudinal and transverse output - Return conveyor for automatic circulation Pos. 1 Vacuum infeed system TBP 410 Max. workpiece size 2,800 x 1,200 x 40 mm Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees Pos. 2 Single-sided laser edge banding machine HOMAG KFL610/21/PU/L/25/SI14 For automatic 4-sided processing in 4 passes With SI 14 feeding system for automatic feeding of longitudinal and transverse parts Equipment: - Release agent application top and bottom - Trimming cutters 4.5 KW / Double-trimming cutter 2 x 6.6 KW - Stepless axis adjustment vertical and horizontal - Mortising unit 2 x 4 KW - LASERTAC activation unit 3 KW / optionally PU gluing - Max. edge thickness 3 mm - 24-position roller magazine with servo-controlled edge feeding - Release agent spray device top/bottom - Trimming unit bevel/straight HL 84 / 0.8 KW with 2 motors - Pre-milling unit with 2 motors, each 1.5 KW (pneumatically adjustable to 2 positions) - Release agent spray device top - Profile milling unit FK 23 with 2x8-position tool changer for 20 cycles/minute - Multi-scraper unit MN 21 automatic - Finishing unit FA 11 top/bottom (flat scraper and buffing unit) - Milling unit with 6.6 KW motor, pivotable 90 degrees, stepless axis adjustment vertical and horizontal. With HSK 63 F tool holder - Machine is designed for tool changes in the gap Pos. 3 Workpiece return with chain lifting buffer To decouple processing machines by temporarily buffering. Return via approx. 6 belt conveyors Pos. 4 Vacuum transfer device TBP 410 Max. workpiece weight 50 kg Small parts down to min. 250 x 85 mm (longitudinal and transverse) Narrow parts 2,800 x 69 mm (longitudinal only) Ibsdpfx Apszvmx Ae Dec Servo-controlled lifting drive for max. 18 cycles/minute With servo-controlled rotary device -90/+180 degrees

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Ibedpfxoz Hxhue Ap Djc Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Iodpozp Hc Uofx Ap Dobc Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system Ijdpfozlh Ausx Ap Djbc automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: excellent (used), Year of construction: 2016, ABB IRB4400L-10 + IRC5 controller + TPU-Low DTC DEVELOPMENT OF GSG ROBOTICS Ibjdpfxoz Tadxe Ap Dec GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZCFC50C100D515072, mileage: 104,120 km, power: 125 kW (169.95 HP), first registration: 09/2025, fuel type: diesel, empty load weight: 2,592 kg, overall weight: 5,200 kg, tire size: 195/75R16 107/105R, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: mechanical, number of seats: 2, Year of construction: 2014, Equipment: ABS, airbag, trailer coupling, If you have any questions or would like to arrange a viewing, please feel free to contact us. We are offering for sale our Iveco Daily RCS 15 PU 150 NG Metras oil spill cleaning vehicle. For technical enquiries, you are welcome to contact us by phone. Standard equipment: 26801 Driver’s airbag 40000 Anti-lock braking system (ABS) 70303 Traction control system (ASR) 70406 Drive type: Rear-wheel drive 01213 Version: C-Series 40390 Brake assist 37711 Cargo area ceiling light 70308 Electronic stability program (ESP) 25408 Digital tachograph 42509 Rear axle suspension: parabolic 42515 Front axle suspension: torsion bar 35000 Electric windows 22608 Tinted windshield and side windows 74208 Alternator 120 A 26704 Speed limiter system 90 km/h 75205 6-speed gearbox 08403 Body/build: High roof van 27505 Cargo partition 18205 Headlight range adjustment 24406 Radio pre-installation with speakers 48002 Wheelbase 3300 mm 67108 Tyres 195/75 R16C 107/105 P 18000 H4 headlights 69800 Power steering 33208 Cabin seats: double passenger seat with headrests 44002 Steel rims 5x16 18607 Daytime running lights 38105 Immobilizer 05409 Permissible gross weight 5.20 t Special equipment: 14202 Trailer coupling: fixed tow ball 14296 13-pin trailer socket 14295 Trailer socket pre-installation 15200 Exterior mirrors electrically adjustable and heated 37810 Overhead storage with additional DIN compartment 42905 Rear axle suspension: air 26708 Cruise control system 36505 Rear doors (opening angle 260 / 270 degrees) 29200 Cabin air filter: pollen filter 28901 Automatic climate control 77403 Fuel tank: 90 L Ibodpfjw A Nw Dox Ap Djc 28709 Air conditioning compressor 170 ccm 92206 Engine 3.0 L – 125 kW diesel CAT 18617 Fog lights with static cornering light 77005 Diesel particulate filter 36205 Left sliding door to cargo/passenger area 36209 Sliding doors left and right to cargo/passenger area 20405 Mud flaps front and rear 33105 Cabin seats: single passenger seat, 2-way adjustable 32100 Cabin seats: comfort driver’s seat (hydraulic) 35301 Central locking with remote control Subject to typographical errors, mistakes, and prior sale. No safety-relevant defects are known on the vehicle. The vehicle has been inspected according to applicable regulations. All details in this offer have been carefully checked but are non-binding. Subject to change, error, and prior sale. Sale excludes any and all warranty. No accident damage is known or has been checked for.

Condition: used, mileage: 74,671 km, power: 137 kW (186.27 HP), first registration: 06/2023, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 07/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 35 m³, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 160 ----Additional Features * Original 74,672 km * Air conditioning * 2-stage engine brake * ACC adaptive cruise control * Lane keeping assistant * Rear view camera * Tail lift * Rear air suspension * Driver airbag ----Special Equipment * Upholstery: Fabric * Base color: White * ABS, ESP * On-board computer * Ready for operation * Truck registration * Particle filter * Power steering * Cruise control * Partition * AD Blue tank * Roof spoiler * Multifunction steering wheel * Radio USB / BT * Winter tires * Suspension seat with seat heating, driver's side * Bluetooth hands-free system * Central locking with remote control * Twin tires Isdpfx Apsz Taudo Debc * Electric windows * Electrically heated side mirrors * Electric immobilizer ----Technical Data: * HSN/TSN: 4192/000 * Automatic transmission * Suspension: Leaf-air * Euro6d-TEMP * Environmental badge: 4 (Green) * Wheelbase: 4,185 mm * Cargo area dimensions: L: 6,100 mm W: 2,480 mm H: 2,370 mm * Payload: 2,370 kg * Tire size: 235/75 R17.5 * Tire tread: approx. 40% - 70% ----German Vehicle! * €39,900 net plus VAT * MOT/emission test valid until 07/2027 * In the event of export to third countries or EU countries, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description is for general identification of the vehicle only and does not constitute a warranty in the legal sense. * The information provided does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase * Subject to price changes, typing errors, errors and prior sale * Dear customer, please understand that due to the age and mileage of the vehicle, we prefer to sell it to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * * Internal number: 160 Search fields: Adaptive cruise control

Condition: good (used), machine/vehicle number: 15461, Year of construction: 2015, operating hours: 614 h, load capacity: 2,500 kg, lifting height: 3,800 mm, load center: 900 mm, fuel type: electric, mast type: duplex, enginetype: Electric, manufacturer: Dimos Serial Number: 1508029 Ibodpozffu Ujfx Ap Djc

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Ibjdpfx Asz St Tqep Doc Documentation: Available ✅ Chuck: Operational ✅