Used Muli 970 for sale (404)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Cholhccqszqunheqob Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: new, functionality: fully functional, We offer a large industrial lot of 970 pcs HDPE jerry cans, professionally manufactured and UN certified (3H1/Y) for transport and storage of liquids. ✔ Capacity: approx. 20 liters each ✔ Certification: UN 3H1 (ADR compliant) ✔ Material: HDPE – industrial grade ✔ Condition: unused (warehouse stored), minor external dust only ✔ With caps ✔ Stackable – stored on pallets Industrial Use Suitable for: chemical industry oils & lubricants agrochemicals industrial liquids logistics & export packaging 👉 These are industrial UN-approved containers, not consumer-grade canisters. Quantity Total: 970 pcs Preferably sold as one complete lot Location 📍 Dunajská Streda, Slovakia (EU) Commercial Terms Inspection possible Loading assistance available Immediate availability EU & export sale possible Important Note Sold as unverified / as-is, however: ✔ visually unused ✔ professionally stored ✔ suitable for industrial reuse Cjlhcoy Nf Irscqqohb Market Reference (key line) 👉 Ideal for companies currently paying 8–12 €/pcs for new UN-certified packaging. Contact Serious inquiries only. Titel 970 Stk. UN 3H1 20L HDPE Kanister – Industrie / Chemie / ADR Verpackung Preis 👉 5.200 € VB Beschreibung Zum Verkauf steht ein Posten von 970 Stück industriellen HDPE-Kanistern, mit UN-Zulassung (3H1/Y). ✔ Volumen: ca. 20 Liter ✔ Material: HDPE (Industriequalität) ✔ Zustand: ungenutzt (nur gelagert), leichte äußere Verschmutzung ✔ Stapelbar – auf Paletten gelagert Einsatzbereiche Geeignet für: chemische Industrie Öle & Schmierstoffe Agrochemie industrielle Flüssigkeiten Logistik & Exportverpackung 👉 Industriequalität – kein Konsumprodukt Menge Gesamt: 970 Stück Verkauf bevorzugt als Komplettposten Standort 📍 Dunajská Streda, Slowakei (EU) Hinweis Verkauf als ungeprüft / wie besichtigt, jedoch: ✔ optisch unbenutzt ✔ professionell gelagert Marktvergleich 👉 Ideal für Unternehmen, die aktuell 8–12 €/Stk. für neue UN-Kanister zahlen.

Condition: excellent (used), CATALOGUE NUMBER 8032 TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES Chslhjzxg H Soccqqeb - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 621915, input voltage: 400 V, total length: 970 mm, total width: 1,910 mm, total height: 1,430 mm, input current: 22 A, input frequency: 50 Hz, empty load weight: 1,055 kg, overall weight: 1,347 kg, type of input current: three-phase, power: 12.1 kW (16.45 HP), Set of 2 dough mixers Set of 4 removable bowls Set including 1 lifter Removable bowls on a trolley Chsljzrlrgshccqqob Dimensions per mixer: 970 x 1,910 x 1,430 mm Height with head raised: 2,140 mm Flour capacity per mixer: 100 kg Dough capacity per mixer: 160 to 200 kg Capacity varies according to hydration rate Bowl volume: 285 L Power per mixer: 10.2 kW Power supply: 3 x 400 V 50 Hz three-phase Net weight per mixer: 1,055 kg Gross weight per mixer: 1,347 kg Packaging: 2,050 x 1,270 x 1,730 mm Bowl and spiral made of AISI 304 stainless steel Base and grating made of AISI 304 stainless steel Reinforced frame made of steel and cast iron Two independent motors Two programmable speeds Bowl reversing in first gear Hydraulic head lift Hydraulic trolley locking Dual digital timer

Condition: used, Year of construction: 2016, operating hours: 11,448 h, Equipment: ABS, all wheel drive, Hyundai HL 970 XT - Central lubrication system - LED work lights - Rear-view camera - Joystick steering - Air-suspended driver's seat Cjljv A Enyshccqqehb - Rear-view camera - Heated mirrors Errors and prior sale excepted. Internal vehicle number: 10672. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us via WhatsApp.

Condition: good (used), Code: 0422 Chslhccozkqk Eoqqsb Brand: VILMAR Model: 970 Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Work surface dimensions mm 970 x 500 Opening mm 350 N° 3 pistons Hydraulic power unit Overall dimensions mm 1630 x 1300 x 2100 h Machine to be reconditioned

Condition: used, Year of construction: 2000, machine/vehicle number: 0-201-21-369, functionality: fully functional, operating hours: 999,999 h, power: 25 kW (33.99 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,700 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 4,500 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 200 mm, number of axes: 4, number of slots in tool magazine: 12, controller manufacturer: Homag, actuation type: electric, total height: 2,400 mm, total length: 7,250 mm, total width: 4,000 mm, overall weight: 7,500 kg, table length: 4,500 mm, table width: 1,150 mm, Equipment: CE marking, documentation/manual, We are offering this used HOMAG BOF 41/45/R machining center, manufactured in 2000. Manufacturer: HOMAG Model: BOF 41/45/R Year of manufacture: 2000 Condition: used Category ID: 2076 Type ID: 970 Cholhszwm Rbjccqqjb Machine type: Machining center Includes 3 vacuum pumps: 2 Siemens Elmo (Elmo Rietschle) vacuum pumps, type: 2BL2141-2AH50-4A-ZN01 + 1 Rietschle VTA140 vacuum pump The machine is connected and still in use. Inspections are welcome! Available from mid-December! If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cslhezry I Ajccqqehb Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Original PROBAT 60 industrial roaster, manufactured in 1970, equipped with a wood-fired heating system. A robust, heavy-duty machine, renowned for its high durability and excellent roasting quality. Includes: - Cooler - Cyclone - Exhaust system Celhccozcl U Deqqehb The machine is currently disassembled and ready for transport.

Condition: like new (used), Year of construction: 2024, For sale: 8-colour offset printing press RMGT 970PF-8, configuration 8/0 or 4/4, with convertible perfecting unit. The machine is designed for high-quality industrial printing and is equipped with an extensive range of automation systems, including presetting, register control, cleaning systems, and colour measurement. Main technical specifications: Maximum paper size: 650 × 965 mm Minimum sheet size: 290 × 410 mm Minimum sheet size in perfecting mode: 370 × 410 mm Maximum printing area: 640 × 930 mm Maximum printing area in perfecting mode: 630 × 930 mm Maximum printing speed: 15,000 sheets/hour Stock thickness: 0.04–0.5 mm Plate size: 700 × 945 × 0.30 mm Feeder pile capacity: 1,100 mm Delivery pile capacity: 1,100 mm Machine dimensions L × W × H: 12,960 × 3,453 × 2,011 mm Equipment and features: PCS-G Printing Control System Rotary stream feeder Static eliminator on delivery Mechanical double-sheet detector Vacuum suction-type feeder board Paper size preset system Registration device Vertical and lateral image micro-adjustment Ultrasonic double-sheet detector Slewed sheet detector Side lay detector Front-lay Bernoulli device Side lay preset Printing, inking and dampening units: Straight edge plate clamp with positioning pins Infed lower swing gripper feed drum Gripper margin: 10 mm Remote control for vertical, lateral and diagonal register 19 inking rollers, including form rollers 4 dampening rollers Chjley S S Azjhccqqeb R-matic dampening system Oscillating bridge roller Double-double-single perfecting cylinder configuration Delivery section: Static eliminator Chain gripper delivery Delivery jam detector De-curler device Board insertion device Powder sprayer High pile delivery Delivery area sensor Paper size preset system Paper guide under the first delivery drum Delivery belt guide Belt-type vacuum slow-down wheels Additional options: Automatic feeder pile lateral alignment function Blower guide under the swing Pneumatic pull side guide Feeder air preset Impression pressure preset Impression cylinder cleaning function Feed drum fan-out adjustment mechanism Automatic blanket cleaning device Automatic ink roller cleaning device Smart-FPC plate changing device Ink form rollers 1st–3rd oscillating Hollow rollers for ink roller temperature control system R-matic_D remote ON/OFF Technotrans alpha.c chiller with alcohol density control Photo-type delivery pile lowering sensor Delivery fan antistatic eliminator PPC Server III for CIP-4 file transfer Press information display LithoFlash® Inline RMGT 970 Recto Verso automatic inline measurement system LithoFlash software package: LithoDyn ADR, LithoDyn JobChange, LithoFlash OneShot Machine raised by 200 mm The machine has CE marking, safety covers, tools, and documentation in English. The machine is sold in its current condition and at its current location — “as is, where is”. Inspection is possible by prior arrangement. An excellent solution for printing companies requiring a modern, high-performance 8-colour offset press with 8/0 and 4/4 printing capability and advanced process automation.

Condition: like new (used), Year of construction: 2008, amount 1 STK Chslhccqsxgv A Seqsb

Condition: used, Year of construction: 2023, _____Equipment to follow.....,Location: 93095 Hagelstadt Chslhccqeyq Auwjqjb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 970 h, Jungheinrich TFG 30 / 316 ZT – GAS-POWERED FORKLIFT with only 970 operating hours - Year of manufacture: 2006 - 970 operating hours - Load capacity: 3000 kg - Fork length: 115 cm Colhccozxqd Ueqqehb - Good overall condition, fully operational Errors and omissions excepted.

Condition: good (used), Year of construction: 2016, operating hours: 9,698 h, Linde H35D-02 triplo465 / sideshift / 4th function / 2016 / 9700 hours. VERY WELL MAINTAINED / DIESEL A video can be sent via WhatsApp. Cjlhccqszypvlsqohb We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2001, operating hours: 7,345 h, load capacity: 1,600 kg, lifting height: 3,270 mm, fuel type: electric, mast type: duplex, construction height: 2,075 mm, empty load weight: 3,500 kg, mileage: 7,345 km, Acquired through trade-in, in good working condition. Electric duplex forklift, brand Still, year of manufacture 2001, capacity 1,600 kg, lifting height 3,270 mm, maximum stacking height 2,075 mm, container forklift. Cholezv Uv Nohccqqob Equipped with FREELIFT and SIDESHIFT. Battery with external charger. View the video on YouTube.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V Chjlhoy Sap Aoccqqjb - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Cjlhccqozd Unbsqehb Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: used, Year of construction: 2008, operating hours: 9,240 h, Type of fuel: LPG Colour: Grey Empty weight: 4.300 kg Dimensions (LxBxH): 268 x 129 x 259 cm Lifting capacity: 3.000 kg Lift height: 605 cm Clearance lift height: 213 cm Fork dimensions: 1.500 x 970 mm - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: DF13F-13190 - Operating hours: 9240 - Lifting capacity: 3000kg - Lifting height: 6050mm - Overhead clearance: 2580mm - Free lift: 2130mm - Fork length: 1500mm - Maximum fork width: 970mm - Minimum fork width: 250mm Chjlhjyttqhjccqqeb - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights - Mast: Triplex - Inspection valid until: 06-2025 - Drive: LPG - Motor brand: Mitsubishi - Transport dimensions: 2680mm x 1290mm x 2590mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), Year of construction: 2017, - Accessories included - Digital display WEILER VCPlus WORK AREA Maximum turning diameter over bed 360 mm Maximum turning diameter over cross slide 190 mm Distance between centers 800 mm Spindle center height 180 mm TURRET Spindle head DIN 55027/DIN ISO 702-3, size 6 Spindle bore 57 mm Spindle diameter in the front bearing 90 mm MAIN DRIVE Drive power 60 %/100 % duty cycle – / 10.5 kW Speed range 25 – 4,000 min-1 Number of speeds, infinitely variable FEED RANGE Number, infinitely variable Longitudinal 0.01 – 6 mm/rev Cross 0.003 – 2 mm/rev THREADING RANGE Metric threads 0.1 – 20 mm TAILSTOCK Quill diameter 50 mm Quill travel 110 mm Chelhjzu I Amsccqqob Internal taper DIN 228 MK 3 WEIGHT Machine 1400 kg DIMENSIONS Length / Width / Height 2000 x 970 x 1730 mm

Condition: used, Year of construction: 2004, machine/vehicle number: 257253, Clamping force: 13,000 kN, total weight: 69,000 kg, including spraying unit WOLLIN, deburring press REIS TKP3, serial number: 181013, year of manufacture: 2004, weight: 680 kg, industrial robot REIS V60, serial number: 541010, year of manufacture: 2004, machine weight: 1,950 kg, melting and holding furnace STRIKO WESTOFEN W1200SL Pro, year of manufacture: 2004, serial number: 7961, furnace chamber volume: 970 dm³, empty weight: 3,100 kg, heating capacity: 22 kW, machine out of service, not ready for operation. Chjlozhaydshccqqsb

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 Cjlhccsw U Tyloqqshb The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 400 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control LVD Touch-B CNC 18" total power requirement 37.0 kW Chelhcjzu A Rxecqqob weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm well-maintained condition (!!) Special price on request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Simple navigation * Tool and program library * X-axis control and position display * Y-axis control and position display * Swiveling control panel (front left) - CNC-controlled - CNC electric backgauge (X-axis) * CNC electric gauge fingers (R-axis) * Includes height adjustment (R-axis) * Intelligent tool storage (automatic tool changing) * Bending aid - LVD upper tool holder * Hydraulic upper tool clamping - LVD lower tool holder * Hydraulic die clamping - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Machine documentation ToolCell is a fully equipped hydraulic press brake with an integrated automatic tool changer. It is the ultimate bending solution for small to medium-sized batches, high product variety, and increased workpiece complexity.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC OİMF+, controller model: 2025, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, rotary table diameter: 630 mm, overall weight: 27,000 kg, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool length: 630 mm, tool diameter: 250 mm, MAKINO A88 HORIZONTAL MACHINING CENTER Control System: Fanuc Oi-MF Plus 15" Touchscreen All electronic components, servo motors, and drives were completely replaced with a Fanuc system in 2025. The mechanical components have only 2 years of working time. Specifications: Pallet Size (2): 24.8" x 24.8" (630 mm) X-Axis Travel: 35.4" (900 mm) Y-Axis Travel: 31.5" (800 mm) Z-Axis Travel: 38.2" (970 mm) Cslhcceyy Dhfoqqjhb B-Axis Rotation: Full (360,000°) Spindle Speed: 20 – 12,000 RPM Spindle Taper: HSK100 Spindle Motor: 40 HP Automatic Tool Changer: 60 tools Pallet Changer: 2 Power: 380 V; 3 Phase; 60 Hz Full Load Current: 139.8 Amp Approx. Dimensions: 227" x 144" x 124" Approx. Machine Weight: 27 tons Features: 4th Axis Pallet Indexing Through Spindle Coolant and Air Shower Coolant and Spindle Nozzle Coolant Wash Guns and Pump Spindle Lubrication Unit Hydraulic Unit Chip Conveyor Coolant Tank Fully Enclosed Cutting Area Tool Life Management Rapid Traverse Speed: 50 m/min Z-Axis Dual Ball Screw Y-Axis Dual Ball Screw Capable of tool change and operation with 630-size fixtures All maintenance has been completed.

Condition: used, mileage: 66,165 km, power: 96 kW (130.52 HP), first registration: 12/2014, fuel type: diesel, empty load weight: 2,530 kg, maximum load weight: 970 kg, overall weight: 3,500 kg, tire size: 225/75 15C, tire condition: 90 %, axle configuration: 4x2, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2014, operating hours: 66,165 h, front tire size: 225/75 15C, rear tire size: 225/75 15C, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, truck registration, Vehicle number for inquiries: 81131 Peugeot, Boxer 2.5 D * Year of manufacture: 2014 * ABS, Anti-lock Braking System * ESP * Power windows * Particle filter * Power steering * Immobilizer * Central locking * On-board computer * Double cab < 7.5 tons * Radio CD * Airbag * Electric windows and mirrors * Remote central locking * Tool kit * MP3 interface * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,530 kg * Payload: 970 kg * Permissible gross vehicle weight: 3,500 kg * Tire condition, front axle: 90% – 90%, Tire size: 225/75 R15C * Tire condition, rear axle: 90% – 90%, Tire size: 225/75 R15C * Tire sizes: 225/75 R15C Disclaimer: Cholhoy Urarjccqqjb Subject to change, prior sale, and errors. Further pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: used, Year of construction: 2001, Lippert belt conveyor flap belt GF 970-650-500 RA1465 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Chslhjk Abbxjccqqeb Conveying length (NL): 970 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Characteristic / Accessories: Design as folding belt possible on request Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics