Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
working width: 1350 mm Ndjd2 grinding belt width: 1370 mm grinding belt length: 1900 mm Blank length left to right: 6100 kg Pressure total: 63 kVA Dimensions L x W x H: 2700 x 3100 x 2100 mm more
4

Wide belt sander COSTA K6 CCT 1350

Oberkochen, GermanyGermany dealership location
6721 km
used
Working width 1350 mm 9twzzsa90 Number of sanding units 3 st. Workpiece thickness max. 160 mm sanding belt measurements 2620 x 1380 mm Feed motor 3 kW Feed speed 4-20 m/min. High-quality broadband grinder Costa K6 CCT 1350 Working width: 1350 mm Working height: 3 - 160 mm Number of grinding units: 3 pcs. Power grinding unit 1: 30 kW Power grinding unit 2: 18.5 kW Power grinding unit 3: 15 kW (with tracer roller strip for exact detection of the workpiece contours) Feed: 3 kW Feed speed:... more
9

Cross belt sander GRINDINGMASTER MQ 900

Mörsdorf, GermanyGermany
6724 km
1989
as good as new (ex-display)
Cross belt sander Fabr. GRINDINGMASTER type MQ 900 Masch. # TS 135901 built in 1990 Technical data: Size of the drive roller 900 mm x 108 mm Sanding belt 1 piece Sanding belt size 4800 x 150 mm Table speed stepless 1-8 m / min Table 1.5 kW 18 kW Engine speed 3000 rpm. Insulation 80 dBA Air connection required Deburring height / table adjustment 0-150 mm Dimensions L x W x H 2600 x 2100 x 1900 mm Weight 1500 kg with 2hvtdar2 -Number of the loop tracks 1 Fsu2ks0 -Cross grindin... more
Sanding machine with 4 units from 1350 mm of 1 Aggragat belt over roller 2 unit round brushes left and right turning Hjo3eop 3. aggregate round brushes rotating left and right 4. aggregate belt over roller wet sanding more
5
Built in 2001 Control Siemens C7 634 Sheet thickness 0.8 – 100 mm Machining width 1400 mm Processing speed 2-14 m Belt speed 11/22 m 49 kW How to contact with roller 17/13 kW Brush roller I tracking 5.5 kW Brush roller II right opposite 5.5 kW Bb82smimm3 Vacuum 5.5 kW Drying 5 kW 2620 x 1400 mm Accessories: Filtration unit New conveyor belt for the application of the parts 9 sanding belts 120 liters of cooling lubricant Pressure roller Small parts more
5
2 station wide belt sander with 42 segment shoes Bbypnnjnl2 Measures the workpiece and polishing can be programmed. 2 band stations and one brush at vakumm band end for entstauben.mit. Bandmaas 2500x1150mm. On request also with roller table for loading and unloading. Size 1000x2000mm height adjustable and on wheels. more
3

Wide belt machine ERNST EG3 MW

Großbettlingen, GermanyGermany dealership location
6678 km
1985
ready for operation (used)
Second-hand machine, good condition, machine is in production and is under power. The system should be replaced by a new machine Machine number: 28103 year: 1985 dimensions: Lxwxh 2100 x 2500 mm x 1900 mm Weight: approx. 5,000 kg Gr. grinding width 1380 mm, size workpiece height 90 mm Abrasive paper width 1400 x 1690 mm movement of the grinding cylinder Strip speed stepless 3 - 18 m / min Magnetic tape: 2,100 x 200 mm² Roller length: 1,400 mm Operating voltage: 380 V Control volta... more
2

Wide belt grinding machine KBM MS 90K - 2000

Hettenleidelheim, GermanyGermany dealership location
6551 km
2016
as good as new (ex-display)
Machine dimensions: B x H x T: approx. 3470 x 2250 x 1010 mm, height 850 mm working width 2000 mm, sheet length of min. 700 mm, thickness of min. 500 mm, sheet thickness of min. 0,5 mm, thickness of 15 mm, contact roller Ø 250 mm, Konttaktrollenhaerte approx. 50 ° shore, belt 2500 x 2 100 mm, belt drive via frequency converter controlled 37 kW, 1500 rpm, speed, approx. 9 21 m/sec, feed motor 2,2 kW, 1420 rpm,. Vorschubgeschwinigkeitmit FU infinitely adjustable from approx. 3-16 m / min, hub mot... more
3
sh. Broadband Deburring Grinding Machine Make TIMESAVERS-GRINDINGMASTER Model 41 Series 1350 WRDO Masch. 2267-15 built in 2002 for the deburring of stainless steel laser parts and inlet width 1350 mm Sheet thickness: 4 mm cold rolled hot rolled 1 12 16 mm 1 Physical: contact roller 180 mm belt width 1380 mm belt length 1900 mm Machining speed 11 + 22 m / s motor 15/19 kW 2 Aggregate: disc, wet working 1220 mm Speed ​​Oscillating 10 22 m / s freqünzgeregelter motor 7,5 kW feed: vacuum table, wet... more
5

Wide-belt sander Weber OFZ-E2/3N-1350

Schwäbisch Gmünd , GermanyGermany dealership location
6698 km
1995
used
Wide belt sander: Built in 1995 Power requirements 87 Machine weight (kg) 4500 Space 3.85 x 1.88 x 2.2 Manual control mode Manufacturer: Weber type: OFZ-E2/3N-1350 With 2 wet grinding stations, 2 wire brush stops, 1 Scotsh-Brite brush Yr3zdpmb Performance: 87 KW/400V/160A Band-width 1350 mm, passage height 100 mm minimum length 150 mm, width 10 mm, thickness 0.8 mm suction of grinding motor 18 kW engine was overhauled Inc operating and wiring instructions more


Wide band ...
daily

New machines via email!

Stay updated!
3
Type: SRNC 130 Dimensions: 1900 x 1330 mm with div. USED tapes 1984 €2.900 VB + VAT Cip7ibd Send inquiry Wide belt sander model year 1984 weight 2400 kg L x W x H: 250 x 140 x 220 cm piece. Width maximum 1300 mm piece. The height 160 mm more
3

Wet wide belt sander West SG630-WJS

Hohenbrunn, GermanyGermany dealership location
6865 km
2010
as good as new (ex-display)
Affordable entry-level machine for wet grinding with a working width of 600mm for workpieces with a max. 80mm height. Table height adjustment with 4 columns motor synchronous adjustment of sheet thickness. The robust easy to bediende machine for craft operating to achieve Oberflächstenstrukturen. Standard Features: - Digital display with the set plate thickness, motor, programmable adjustment of the plate thickness from control - Emergency / off-abrasive band brake stops within 3 seconds - Inte... more
3

Trimming machine ERNST EG3 MW

Großbettlingen, GermanyGermany dealership location
6678 km
1985
good (used)
Second-hand machine, good condition, machine is in production and is under power. The system should be replaced by a new machine Machine number: 28103 year: 1985 dimensions: Lxwxh 2100 x 2500 mm x 1900 mm Belsy3aq Weight: approx. 5,000 kg Gr. grinding width 1380 mm, size workpiece height 90 mm Abrasive paper width 1400 x 1690 mm movement of the grinding cylinder Strip speed stepless 3 - 18 m / min Magnetic tape: 2,100 x 200 mm² Roller length: 1,400 mm Operating voltage: 380 V Con... more
6
Grinding width: 950 mm Working height: 950 mm workpiece thickness: 0.5 120 mm Band width: 970 mm Sanding belt length: 1900 mm 1 unit: sanding belt drive: 11 kW Sanding belt speed: 9 m / s contact rollers: 200 mm 2. Physical: not completely, engine and clamping missing (see pictures) 3. Aggregate: 1. as aggregate feed: Vorschubgurt (L x W): 4100 x 950 mm feed drive continuously: 1,5 kW height adjustment: 0,37 kW Compressed air: Cable: 8 mm ID air pressure min. / max .: 6 8 bar Air consumption (at... more
1
grinding machine Fabr CARSTENS / RAIMANN type OKS 5 Fabr 1212/10465 Year 1975 Technical data: working width 1300 mm grinding unit with grinding cylinder belt speed 30 m / s pneumatic drive 25 kW. Glider drive 25 kW rotary brushes is (with the drive motor powered by glider) table infinitely adjustable in speed. 6-32 m / min electric. Connection 380 V, 55 kW space 2400x2750x2000 mm Weight 4,5 t - 2 Schlesinger [...Technical data truncated] Uoqeozjq more
3
gebr. Broadband Entgrat-grinder make TIMESAVERS GRINDINGMASTER model 41 series 1350 - WRDO. No.: 2267-15 year 2002 for the deburring of laser parts and stainless steel inlet width 1350 mm sheet thickness: cold, 1-4 mm rolled hot rolled 12-16 mm of 1 Aggrega t: contact roller Ø 180 mm belt width 1380 mm abrasive belt length 1900 mm machining speed 11 + 22 m/s motor 15 / 19 kW 2. Unit: disc, wet working Ø 1220 mm speed oscillating 10-22 m/s frequency-controlled motor 7,5 kW feed: Vakuumt isch, wet... more
4
Grindingmaster times Abraham 1350 grind grinder mm breit wide belt sander with a station to the surface on sheets Dry working. a Scotch or belt can be used on the station Bryxscpa more
2

broadband-surface grinding machine Mafac B 200 S

Augsburg, GermanyGermany dealership location
6797 km
1985
used
Masch.-Nr. 55001 071 Ohdak2kb Bandgroesse 200 x 1800 mm Bandgeschwindigkeit 5/10/20/30 m/s Anschluss 3,4 kW more
6
Make: Ernst Type: EM5NII/L + 2F Year of manufacture: 2007 Workpiece Max: 1400 mm width x length 1540 mm Workpiece min.: length 350 mm Workpiece min. with magnetic or vacuum line: length 80 mm Workpiece thickness: 1-70 mm Volume band filter unit: approx. 400 L Constant working height: 1000 mm Mtzgr0 Feed speed: 2/4 m / min Infinitely variable feed speed: 1.5-8 m / min Operating voltage: 400 V AC Control voltage: 24 V DC, 230 V AC Frequency: 50 HZ Compressed air connection: R 3/8 " ... more
5

Wet Grinder WEBER NLC - 2/2 - Arbeitsbreite 1100

Staufenberg, GermanyGermany dealership location
6563 km
1999
used
Wet grinding WEBER Type NLC - 2 / 2-1100 Year 1999 Technical data: Working height 900 mm working width 1100 mm max. Workpiece height 100 mm Sanding belt speed of about 11/22 m / sec. Sanding belt size 1100 x 2620 mm belt speed 2-14 m / min. Conveyor belt dimensions 1100 x 4800 mm Power 70 kW Dimensions approx 3680 x 2430 x 2450 mm - Dust - filtration equipment used in good condition Cqehxuym more
4
Broadband grinding, and grinding machine Fabr Bürstenentgrat GRINDINGMASTER Type MCSB / B2 1300 Fabr TN 1431-04 Year 1991 Specifications: Working width 1300 mm brush size 1300 x 300 mm sanding belt size 1900 x 330 mm max . Thickness 150 mm capacity of the contact roller 16 kW power of the stainless steel brushes with power of 15 kW rotating oscillating brush with stainless steel-and counter rotating oscillation 15 kW Du [...Technical data truncated] T7sbdpvc more
6

CNC Belt Sander TAGLIABUE TT-3-1300

Staufenberg, GermanyGermany dealership location
6563 km
1996
used
CNC belt grinding machine Fabr TAGLIABUE type TT 3-1300 Machine E6/36886 Year 1996 Technical data: Max. Abrasive belt width 1300 mm max. Through 1300 mm max. Passage height 350 mm variable feed rate from 5.0 to 25 m / min. Sanding belt size 8500 x 150 mm chevron belt size 6530 x 140 mm Breitbandzuführtisch 5000 x 1200 mm discharge roller belt table 4000 x 1400 mm power 30 kW Weight 6000 kg Machine width 5000 mm - CNC Control Make Syel - Extraction and Filtration System Fabr Ticnomac, 13 kW , Ye... more
1
Wide belt sander with various equipment options. 3xfqpvbh Ideal price-performance ratio. Also long belt sanding machines for the metal sector available. more
2

Wide belt sander VIET S 1 211 RS

Oberkochen, GermanyGermany dealership location
6721 km
new
Working width 1100 mm Number of sanding units 2 st. Dshwk8h Workpiece thickness max. 3 - 160 mm sanding belt measurements 2200 x 1130 mm main drive 15 kW more


Wide band ...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close