M 6090 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: NOT APPLICABLE Ncde2 M-E-C 12' x 42' Triple-pass Rotary Dryer Drum with the following components: -- Triple-pass 12' x 42' Dryer Drum. -- NOTES: &#9679 No Drum Drive or Trunnions. &#9679 Trunnions available without drive for an additional $7,500. more
6
Homag Panel Sizing & Edgebanding Machine, KF 26/07/A3/25 Make : Homag Model : KF 26/07/A3/25 Serial# : 0-200-03-0005 Year of Mfg. : 2002 Condition : Used, very good conditions Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in in the US till now! Full Tech. Details and Documentation available upon request DESCRIPTION Fixed side on left, movable side on right. Double-Sided mac... more
10

Edgebander Felder G560

More Felder G 560
Tinnamuck, Moate, Co. Westmeath, IrelandIreland
5381 km
2012
excellent (used)
used Edgebander Felder G560 with pre milling unit this machine is in Germany at the moment (not Ireland) G9jhcbxh Total working hours: 382hrs Total running meters : 13175m Premilling Saw Trimmer Radius scraper Glue scraper Buffers Edge thickness: 0,4 - 5 mm, Work piece thickness: 10 - 60 mm, Feed speed: 9 m/min., Table Ø for edging roll: 750 mm, Pre milling cutters: 60 mm, Saw blade Ø : 100 mm, Power od pre millers: 2 x 1,1 kW, Extraction outlet Ø pre milling: 2 x 8... more
9

Horizontal 3 head thin cutting bandsaw RHINO SAWYER TS-300

Tussendiepen 39, 9206 AB Drachten, NederlandNetherlands
6264 km
2018
excellent (used)
Horizontal 3 head thin cutting bandsaw, very suitable for flooring industry to cut oak lamella, but also universal cutting with 3 heads Maximum Workpiece Size 310mm (W) x 200 mm (H) Saw Wheel Diameter 31.5" Saw Wheel Width 2" In-feed Speed 0-18 m/min Min. cutting Lamella Thickness 2 mm Hi9fi3xx Main Motor 3 x 22.0 kW Rhino Sawyer band saws are the ideal solution for unlimited application in sawing wood. They are very flexible in sawing various widths and thicknesses. With touchs... more
4
spindle diameter:160 mm x-travel:7000 mm y-travel:3500 mm z-travel:1000 mm w-axis:900 mm rotary table::2500 x 2000 mm Caetgfh2m table load:ca. 20 t table adjustment - longitudinal:1000 mm b-axis:360 ° spindle taper ISO:50 spindle turning speed - stepless:2 - 2000 U/min feed speeds infinitely variable:1 - 5000 mm/min rapid traverse:z-16, x-y-w- 20 m/min total power requirement:125 kW weight of the machine ca.: t dimensions of the machine ca.:13,2 x 12,8 x üF 6,0 m new in 1993 retrofitted in 20... more
1
Elect./Voltage: 2toqozu FANUC ROBODRILLL A-T14IA CNC Drilling & Tapping Center -- Table size 25.59" x 14.96" -- Maximum table load 440 Lbs -- Spindle nose to table top 5.9" - 17.71" -- X-axis travel 19.6" -- Y-axis travel 14.96" -- Z-axis travel 11.81" -- Rapid traverse rate X,Y & Z 1889 IPM -- Cutting feed rate 0.1 - 787 IPM -- Spindle speeds 80 - 8000 RPM -- Spindle motor 7.5 HP -- Spindle taper BT 30 -- Tool changer capacity 14 station ATC -- Weight approx. 6,000 ... more
3
x-travel 1.500 mm y-travel 700 mm z-travel 610 mm Control Fanuc 18i-MB turning speeds 12.000 U/min table dimensions (lengthxwidth) 1.700 x 700 mm workpiece weight 2.000 kg tool change unit 48 tool adaptor ISO 40 Bbqmlaev8r max. torque 191 Nm engine output 30 kW weight of the machine ca. 95 t dimensions of the machine ca. 4.475 x 2.952 x 3.030 m - new spindle December 2017 - chip conveyor - internal cooling through spindle center 20 bar - coolant system with 600 l volume, with efficient fi... more
6
x-travel 650 mm Mucr9c y-travel 650 mm z-travel 650 mm Control Siemens 840 D b-axis 0,001 ° size of pallet 400 x 400 mm feed 40 m/min rapid traverse 40 m/min total power requirement - kW weight of the machine ca. 12,0 t dimensions of the machine ca. - m more
5

Fourside moulder Weinig Quattromat 23P

Drachten, NetherlandsNetherlands
6264 km
2003
excellent (used)
Weinig Quattromat 23P 4 Spindles 230 x 120 mm D9uapv Bottom 5.5 KW Right + left 11.0 KW Top 7.5 KW Spindle motors and feed with brakes Feed speed 6 and 12 m/min Extra long infeed table 2,5 meter Waxilit pump Central position of greasing points Without cutterheads Machine in very good condition ! more


m 6090
daily

New machines via email!

Stay updated!
1

Crane UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
weight max.:300 t stroke: mm clamping width: mm total power requirement: kW weight of the machine ca.:5 t Dvptatk dimensions of the machine ca.:2,5 x 2 x 1,6 m crane hook more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Wtixk TVM, M-10, FILTER AND STORAGE BIN. SYSTEM PROFESSIONALLY DESIGNED, MANUFACTURED AND INSTALLED BY TVM (TERMOVENTILMEC). Roof Mounted Filter unit. -- Specs: (10) modules each made of galvanized steel panels. Total filter area 5,380 sq. ft. (500 sq. mt.). Each bag is restrained at its base. -- Fan 1: BLR-500, approx. 20" inlet dia. rated for 8,900 CFM (15,000 cu. mt./hr) 9.6" WG. and 22 BHP. Powered by 30 HP motor with belt drive. 220-440 V, 60 H... more
6
max. workpiece diameter 440 mm threading length 4000 mm X9f02w8 max. module 12 min. module 0,5 max. wheel diameter 440 mm gear width 4000 mm no. of teeth to be hobbed 3 - 300 mm max. swing diameter 600 mm Slide cross Axial = 4000 mm dist. cutter spindle - workpiece spindle 50 / 316 mm diameter of hob 192 x 220 mm head swivability +/- 45 ° taper Morse 5 shifting 200 mm milling drive motor 22 kW hob turning speeds 80 - 340 U/min electrics - voltage/frequency 400 / 50 V/Hz control Sinumerik 8... more
4
Mapal MN5364-08-KF stretching clamping chuck DIN 69882-7 m. axial. Length settings. Ø 16 mm DIN4000-89-HSK HSK basic holder, used, normal wear, 100% functional, included with com. photos Bcr8twbmxg more
6
Weinig Powermat 1200 230 x 160 mm 7 spindles - full options machine ! Bottom 7.5 kW Right 11.0 kW Left 11.0 kW Top 15.0 kW Top 15.0 kW Bottom 11.0 kW Universal spindle 11.0 kW Feedmotor 7 KW, with inverter 6-36 m/min Weinig Powercom Plus Touchscreen Motors with brakes Marathon Coating for machine tables and fences HSK Powerlock on all spindles 4000-12000 rpm for spindles 2-7 5 x axial CNC controlled adjustment spindles 2,3,4,5,6 5 x radial CNC controlled adjustment s... more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm Tephbfcmc y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more
1
Elect./Voltage: Cuonvn2 MONNIER & ZAHNER M621 Thread WhirlerSpecifications: -- Fanuc 18m control. -- Diameter of part 2.5 mm to 13 mm (.098” to .511”). -- Length of part 300 mm (11.81”). -- Length of thread whirled 200 mm (7.87”). -- Auto load/unload. -- Excellent condition. more
5

Pipe profiling burning system Biber 3

Köln, GermanyGermany dealership location
6416 km
1997
used
total power requirement:2,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:12 x 0,6 m Pipe-diameter on the chuck:20 - 200 mm 00olvwep Tube length:max. 6000 mm wall thickness max.:10 mm machine dimensions (length x width x height):2800 x 540 x 1620 mm cutting path speed:0.1 - 3.0 m/min. tube conveyor speed:0.1 - 5.0 m/min. track length of tube conveyor:250 mm length of cutting curve max.:250 mm Pipe profil burning system / Plasma Pipe cutting machine BIBER 3, including a 100... more
3
x-travel:1230 mm y-travel:355 mm z-travel:440 mm total power requirement:12 kW table-size:1600 x 400 mm tool taper:SK 50 speeds:28 - 1400 U/min feed - longitudinal/cross:16 - 2500 mm/min feeds Z-axis:12,5 - 1000 mm/min Xobmxvax weight of the machine ca.:4,2 t dimensions of the machine ca.:1,9 x 4,0 x 2,2 m more
9

Fourside moulder Weinig Powermat 600

DRACHTEN, NetherlandsNetherlands
6264 km
2017
good condition (used)
Weinig Powermat 600 6 Spindles - year 2017 230 x 160 mm Bottom 7.5 KW Right + Left 11 KW Top 11 KW Dwc02u Top 7.5 KW Bottom 7.5 KW Feedmotor 5 KW, frequency inverter 5-30 m/min Weinig Memory Plus System 3 x Radial CNC controlled adjustments for spindles 3,4,5 CNC controlled adjustment feed high/low Spindles 40 mm Marathon Coating Infeed table 2 meter Waxilit pump for table greasing Central position of grease points on front of machine Spindle motors with brake Without ... more
4
faceplate diameter:3500 mm swing diameter:5900 mm turning height:1300 mm slide stroke:900 mm faceplate turning speed range:0,1 - 30 U/min total power requirement:70 kW weight of the machine ca.: t dimensions of the machine ca.: m Mxnpn CNC HEIDENHAIN TNC 145 CS 2 Ram´s more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncfnl DMC CN110/2 Chronosand Planer Sander 2-Head, 43" width cap. Abrasive Planer;Equipped with: -- 1st Head: Hellical, carbide insert knife planer head, 30 HP motor; -- 2nd Head: Rubber covered contact roll 11" dia., (80 duro), 25 HP motor. -- 43" x 103" (to be verified) Abrasive belts with electronic belt tracking and air tensioning, -- Automatic tracking of conveyor belt, variable feed speed from 13 - 66 FPM, 7.5 HP motor. Complete with: -- Air blast... more
1
Used universal tool milling machine Fabr. AVIA, type C20 built in 1989 with 3-axis digital display HEIDENHAIN Positip machine comes from a training workshop technical data Table size / clamping surface 280 x 750 mm Table size vertical table 250 x 826 mm Verfahweg of x 400 / 420 mm Travel of the Y-axis 310 / 330 mm Traverse path of Z-axis 330 mm Spindle speeds vertical / horizontal 16 levels 56-1800 rpm. Spindle taper ISO 40 Ba8j3y9art Quill stroke 80 mm Feed range all axles 16 levels of... more
6

Internal Grinding Machine TRIPET TST 201

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1987
used
grinding diameter 3 - 150 mm Control TRIPET TST CNC grinding length 200 mm center height over slide 150 mm work piece spindle speed 75 - 1300 U/min grinding spindle speed 8000 - 150000 U/min Fixed number of revolutions when straightening 75 U/min dimensions 4800 x 3200 x 2150 mm weight ca. 4000 kg required power 10 - 15 kW Max. Movement of the longitudinal slide 480 mm Swivel range of the workpiece headstock +45 / -30 ° Workpiece spindle bore 40 mm X-axis resolution 0,00025 mm U-axis resolution... more
6

Fourside moulder Weinig Unimat 500 Classic

More Weinig Unimat 500
DRACHTEN, NetherlandsNetherlands dealership location
6264 km
2007
good (used)
Weinig Unimat 500 5 Spindles 230 x 120 mm Bczhfkrnlq Bottom 7.5 KW Right + Left 11.0 KW Top 11.0 KW Bottom 7.5 KW Feedmotor 4 KW, with inverter 5-28 m/min Weinig Memory System Motors with brakes MarathonCoating table plate Infeed table 2 meter Waxilit pump Without cutterheads Machine in very good condition more
4
spindle diameter:70 mm x-travel:800 mm y-travel:800 mm z-axis:1200 mm table-size:1000 x 800 mm spindle taper: MT:5 spindle stroke:300 mm feeds:0,028 - 12 mm/min spindle turning speed range:7 - 1350 U/min faceplate diameter:500 mm faceplate speeds::7 - 135 spindle motor:5 kW voltage:500 V weight of the machine ca.:8 t total power requirement:7 kW dimensions of the machine ca.:5 x 2,3 x 2,5 m Bqmbnjvk The machine was used in a training school and generally overhauled in 2008! - facing head - ... more
1
Elect./Voltage: 230/480 V/ 3Ph/60 Hz Glombwcdg AMADA M-3060 Hydraulic ShearSpecifications: -- Spindle motor 15 hp. -- Blade 10' 6". -- Max. thickness .236". -- Max. length 120". -- Stroke 60 spm. -- Full load power 11.4 kva. -- Cutting capacity 10' x 1/4". -- Overall length of knives 133". -- Rake angle 1º 81'. -- Gap depth (throat) 11.8". -- Number of hydraulic holddowns 13. -- Distance floor to top of bed 31.5". -- Speed 60 [...] with: -- 40" front-operated programmable p... more
3

CNC press brake Beyeler RT80x2050

Erwitte , GermanyGermany dealership location
6470 km
1990
good (used)
Used CNC press brake Fabr. BEYELER, type RT80x2050 Built in 1990 with Cybelec 90/9000 specifications Maximum bending length 2050 mm continuity betw. d. stands 1500 mm Mwzpx Throat depth 250 mm stroke 380 mm (high) Height 530 mm (increased) 2.50 x 1.80 x 3.15 m machine weight machine dimensions Lxwxh approx. 7400 kg of equipment and accessories 2-hand control foot pedal various press brake tooling for hydraulic pump overhauled in March 2018 more
4

Faceplate Fabr. Unbekannt/unknown

Bünde, GermanyGermany dealership location
6460 km
used
faceplate diameter 1200 mm tool adaptor DIN 55027/11 bore 140 mm width 110 mm weight ca. 800 kg 9h28z3lqu Clamping disc with 6 studs. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
x-axis 7000 mm y-axis 3500 mm z-axis 1250 mm Control Siemens 840D w-axis 1500 mm table surface area 6000 x 2000 mm distance between columns 2500 mm distance work spindle /surface of the table 2500 mm tool taper HSK100 spindle drive 45 kW spindle turning speed range 5 - 6000 U/min max. torque 1250 Nm feed - X 60000 mm/min. Bcavqv3jhk feed - X 60000 mm/min. feed - Z 60000 mm/min. feed w-axis 6000 mm/min. numbers of positions in the tool changer 256 weight of tools max. 35 kg workpiece length 6... more
1

Jig Grinding Machine HAUSER 3 SMO

Mönchengladbach, GermanyGermany dealership location
6371 km
1968
used
x-travel:400 mm y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:bis 50000 U/min peripheral speed:max. 35 m/sec capacity:ca. 7 kVA Dyo8y2u power capacity:6 kW weight of the machine ca.:2 t dimensions of the machine ca.:3 x 3 x 3 m rotary table d = 300 mm frequency changer more
1

MACHINING CENTER - CNC (HORIZONTAL) MORI SEIKI SH-8000

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: Bbuxjqlzqz Mori Seiki SH-8000 Horizontal Machining Center -- X-Axis travel: 51.2" (1,300 mm). -- Y-Axis travel: 47.2" (1,200 mm). -- Z-Axis travel: 43.3" (1,100 mm). -- Pallet surface to spindle center: 2 - 49.2". -- Table center to spindle gage plane: 7.9" - 51.2". -- Pallet size: 31.5" x 31.5" (800 mm x 800 mm). -- Number of pallets: 2. -- Pallet change time: 14 Sec. -- Max. workpiece swing diameter: 51.2" (1,300 mm). -- Max. load capacity: 4,400 L... more
6
grinding diameter max. 100 mm regulating wheel width (350x) 250 mm max. width of grinding wheel (650x) 250 mm Control Siemens 840D Mw2st max. workpiece diameter 100 mm min. workpiece diameter 1,5 mm workpiece length - max. 245 mm grinding motor 22 kW drive control wheel 5,7 kW regulating wheel turning speeds 5 - 600 (900) U/min grinding wheel adjustment 0,0001 mm total power requirement 56 kW weight of the machine ca. 13 t dimensions of the machine ca. 5,7 x 3,3 x 2,3 m Centerless grinding ... more
6
chamfer lenght 480 - 4045 mm Various tooling: 1: 65 x 65 x 4045 mm (hardly used), dimensions see sketch, price = 940, - Ysfxwan9 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - 4: 90 x 90 x 515 mm, dimensions see sketch, price = 150, - 5: 65 x 65 x 480 mm & 65 x 65 x 665 mm, dimensions see sketch, price =300,- Prices excl. VAT Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
5

Angle punching line Voortman V550

Köln, GermanyGermany dealership location
6416 km
1999
used
working lenght:6.000 mm pressing power:180 t Punching capacity:1000 kN cutting capacity:Flach - max. 22 mm cutting capacity:Winkel - max. 150 x 150 x mm punch diameter:30 mm number of punch tools:3 Stk. / pcs. quick change toolholder: connected load frequency:3 x 400 V control:VACON 110 accessories::Zufuhrwagen mit Materialk accessories::Schleppketten-Quertranspo Ewx2awkae weight of the machine ca.: t Voortman V500 is a punch shear system for flat steel and angle profiles. Horizontal and v... more
6
x-travel 2200 mm y-travel 560 mm z-travel 720 mm Control Heidenhain iTNC 530 table surface area 2600 x 600 mm table load 2,2 t turning speeds 20 -12.000 U/min taper ISO SK 40 tool change unit 30 -fach rapid traverse 50 m/min Number of working hours ca. 25.000 h spindle hours ca.8.100 h total power requirement 36 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,40 x 2,45 x 2,65 m DECKEL MAHO DMG DMF 220 Linaer equipment ----- direct weighing system IKZ 600 liters 40... more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Bbu7fiqr3p XUZHU WSG-2000 Single-pass Dryer System complete with the following main components: Special Note: We originally sold this system as a slightly used package of equipment. The current owner moved it to Spain and re-painted it but never actually installed it or used it because his business changed. &#9679 Photos 7 thru 10 are current photos whereas 1 - 6 are of the machine prior to shipping to the current [...] DATA: -- Diesel Furnace rated for ... more
5

Herringbone Shaping Machine SYKES 5 E

Monheim, GermanyGermany dealership location
6405 km
used
total power requirement 10 kW max. wheel diameter 1600 mm gear width 457 mm max. module 12,5 min. module 2 Bbic9xhouf spindle bore 222 mm stroke 15-120 Hub/min roll feed 0.3 - 0.84 mm/min down feeds mm/Hub electrics - voltage/frequency 380 / 50 V/Hz weight of the machine ca. 18,9 t dimensions of the machine ca. m EXTERNAL GEARS: Blank diameter:- Max 63" 1600 mm Min 0 0 Face width, double helical 0 - 18" 0 - 457 mm Face width, spur or single helical 0 - 10" 0 - 254 mm INTERNAL GEARS: ... more
2
table diameter 380 mm table height 118 mm mm Nbnht weight ca. 75 kg dimensions of the machine ca. 600 x 500 x 118 mm Index base with dividing-head plate Index plates ( diverse ) The table is fully functional and in good condition. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6

CNC Lathe Ouick Tech AT25 Smart

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2002
used
turning diameter 60 mm turning length 100/225 mm control Quick Tech Control-Mitsub x-axis 200 mm y-axis 335 mm z-axis 255 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2650x1450x1700 m Bcoq0jlycz more
12
We offer you, a used hobbing machine from the manufacturer Staeheley. Built in 1958 Wheel diameter - 600 mm Wheel width 280 mm Module - up to 5 Shaft height 20 / 390 mm Round table diameter 420 mm Bahagd Table bore 80 mm Taper MK 4 Milling cutter speeds 53-200 RPM Machine weight approx. 2.60 t Space requirement approx. 2.20 x 1.50 x 2.00 m Incl. removable wheels and original manual with installation plan, wheel translation etc. Machine plays demonstration ready for us in the ... more
1

DUST COLLECTOR (PULSE JET) KICE M 120-10

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Cdfjpeb 14,000 CFM approx. 10 to 1 air-to-cloth ratio, Modular rectangular style dust filter with (120) tubes 118" long, total filter area about 1,400 sq,ft. Manifold with diaphragm valves to supply the "PNEUJET" cleaning system. -- Supplied with KICE FA24 fan with 21" inlet dia. and a 25 HP TEFC motor; high entry inlet; constructed of heavy gauge steel with sloped hopper with inspection door; access platform; discharge auger. -- PD pump is not with... more
5

Vertical Turret Lathe - Single Column DÖRRIES SDE 280/V5

Mönchengladbach, GermanyGermany dealership location
6371 km
1976
used
faceplate diameter:2800 mm 02p977u3d swing diameter:6000 mm turning height:2500 mm faceplate turning speed range:2,12 - 112 U/min max. ram stroke:1000 mm max. workpiece weight:60.000 kg feeds:0,71 - 128 mm/min rapid traverse:2 m/min total power requirement:65 kW weight of the machine ca.:55 t dimensions of the machine ca.: m DRO Heidenhain more


m 6090
daily

New machines via email!

Stay updated!

to

to

Edit search
M 6090
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close