Used M 6090 for sale (69,583)

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Ffedpsrxri Sjfx Afneu Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Ffjdpfx Afevbdyfsnsu Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: used, Marel M Series 3000 Ffsdoxtfvhjpfx Afnsu

Condition: excellent (used), Brochure production line Horizon SPF 20 FC 20, collating towers Horizon MC 80a, 80m, jogger PJ77. Fodpjwz Skqefx Afnefu

Condition: good (used), axle configuration: 3 axles, first registration: 09/2008, suspension: air, color: black, Year of construction: 2008, Equipment: ABS, = Additional Options and Equipment = - Air suspension = Notes = M&V Euro 902K 3-axle trailer, container chassis, extendable for 2x 20ft/30ft/40ft, German registration!!! = Further Information = Axle configuration Axle brand: SAF Suspension: Air suspension Rear axle 1: Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 5,690 kg Payload: 33,310 kg Gross vehicle weight: 39,000 kg Functional Extendable body: Yes Ffjdpfx Afoxyubyoneu Condition Technical condition: good Visual condition: good Further information Please contact Gerrit Haverhoek for more information.

Condition: used, functionality: fully functional, empty load weight: 6,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2008, loading space length: 6,400 mm, loading space width: 2,500 mm, loading space height: 3,170 mm, total length: 9,000 mm, total width: 3,250 mm, total height: 4,000 mm, suspension: air, tire condition: 60 %, color: yellow, trailer brake: trailer braked, Year of construction: 2008, Equipment: ABS, Truck trailer with Edscha sliding roof First registration: 05.12.2008 L/W/H: 9000/2550-3250/4000 mm Internal length: 6400 mm Unladen weight: 6,920 kg Gross vehicle weight: 24,000 kg Ffsdex Ati Uspfx Afneu Inspection valid until: 11/2025 Equipment: - Loading ramps, 14 t load capacity + supports - Hydraulically extendable rear portal - Lifting roof - Oversized width up to 3.25 m under tarpaulin - Interior height 3.17 m

Condition: like new (used), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 20700114-2016, year of last overhaul: 2025, Equipment: documentation/manual, Piston pump for sale due to surplus. Fedexyt T Uspfx Afnjfu It was only used to spray four front doors with water-based high-build coating, so it is practically as new! Without spray gun. Service and spare parts are easily available from Hendrichs, Eupen or B&M.

Condition: excellent (used), Year of construction: 2020, L+M EcoCell 3.9-1200 C Dust Extraction System TECHNICAL DATA Manufacturer: L+M AG Model: EcoCell 3.9-1200 C Year of Manufacture: February 2020 Airflow Volume: 3,000 m³/h Voltage: 400 V Current Draw: 7.60 A Power: 5.50 kW Frequency: 50 Hz ATEX Compliance: ATEX 2014/34/EU Ffjdpfoxflx Tex Afnju Control System: Reco RM-DPC Micro FP Filter Status Display: FC-240 Spark Detection: Control Logic PAN-705 Spark Control Panel Filter Elements: 9 units SCOPE OF DELIVERY Includes (not an exhaustive list): - L+M EcoCell 3.9-1200 C dust extraction system - Filter status display - Spark monitoring system - 9 x filter elements - VDL rotary airlock with motor drive - Control cabinet with operator controls - Additional WESCO separator Exact scope of delivery as shown in the photo series The L+M EcoCell 3.9-1200 C dust extraction system was built in February 2020 and offers a high-performance and safe solution for industrial extraction and filtration tasks. With an airflow volume of 3,000 m³/h, a power rating of 5.50 kW, and robust ATEX certification according to 2014/34/EU, the system is ideally suited for use in hazardous (explosive) environments. It features a state-of-the-art Reco RM-DPC Micro FP control unit and an FC-240 filter status display for precise system monitoring and management. For added safety, it is equipped with a PAN-705 spark detection system. Nine high-performance filter elements ensure efficient separation of dust particles. The configuration also includes a motor-driven VDL rotary airlock, a control cabinet with operator elements, and an additional separator from WESCO. This combination guarantees a reliable, safe, and durable dust extraction solution for demanding industrial applications. No guarantee is provided for the accuracy, completeness, or timeliness of the information.

Year of construction: 2021, condition: new, Gastro M Electric grill plates Demonstration unit without original packaging. NEW with warranty. Ffedpfx Aehgwd Tofneu The Gastro M series is robust, powerful, energy-saving, easy to clean and have a modern look. All units are made of stainless steel and can be connected with connecting bars. Gastro M is the indispensable link in the professional kitchen Electric grill plates with smooth grilled surface. Fast heat-up time, built-in grease drip tray, thermostatically controlled zone with built-in on/off switch and pilot light. Easy to clean. Stainless steel housing High quality cast steel plate Integrated fat collection drawer Adjustable thermostat Even heating Suitable for base cabinet AGL913 & base frame AGL911 Specification: Gastro M Model 60/30FTE 300mm wide Power: 3kW/400V Dimension: 600(D) x 300(W) x 280(H)mm Weight: 27kg Accessories on request If you wish a detailed consultation, please contact us All dimensions = approximate Photo similar

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Counterknives fully rewelded and hardfaced Shafts with Bearing System 1 arrangement Fodjw Ufhbopfx Afnjfu ✔️ Ready for immediate use Contact us for price and further details.

Condition: used, Four in a Row – The Success Factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Chipboard approx. 4,000 m² Panel size: 3,200 mm x 1,000 mm x 38 mm P6 coating Net sqm price: €8.00 Ffsdpfx Afjvdqhbenju This is a used item. PLANNING & CONSULTATION Our sales team will gladly provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price stated is a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT itemized. ABOUT US The company DLK in Nordhorn sells new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and craft businesses. We continuously offer attractive used items from various manufacturers/brands at competitive terms. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, working width: 1,600 mm, M&M Mediterranea de Maquinaria, Pizza box machine Rotary cutter line M&M WRC 98 1150-1600mm Fustellatore rotativo M&M MODE WRC 98 1150-1600mm The box production process is as follows: -Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colors, cuts the box and sends it on with a tape and stacks it. -The machine makes about 50,000 boxes in one shift. -The largest dimensions of cardboard that can go into the machine are 1150*1600. -The machine has about 15 to 20 tools for different sizes of pizza boxes. Ffjdpfsru Hl Iex Afnsu -New electronics are in the machine Video of machine in production available on demand.

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader - automatic unloader for textiles - fully working - not much use Ffodpfx Afeqvmkdonsu

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm Fodpfsxdvhpjx Afnefu - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm, P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Delivery scope: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening materials PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €2,711.50 net, plus transportation and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €4,756.00 net, plus transportation and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €6,659.80 net, plus transportation and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €8,662.00 net, plus transportation and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €8,381.70 net, plus transportation and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €12,162.50 net, plus transportation and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €15,136.80 net, plus transportation and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €22,782.72 net, plus transportation and VAT. Further variants available upon request. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & TAILOR-MADE PRODUCTION This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended area of application. Our planning department will provide you with an individual, non-binding quotation based on your specifications. Whether for new construction, expansion, or modernisation of existing systems – we support you with sound technical expertise and practice-oriented solutions. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the order and can be requested from us individually. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is stated per unit/excluding VAT, or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used deals from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. Ffsdpfx Asn Up R Isfnju 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Fjdpfsdzc Rxjx Afnefu Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, Heavy duty splicing press for producing long lengths of timber Ffedpfx Aspahmhsfnou Simple to use Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Maximum wall panel height 3500mm One man operation Weight of unit 80kgs Fedpfx Afofqmtkonsfu

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Fjdpfxeb Tmrvo Afnofu Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, Lifting /Turnover ("Butterfly") Device for raising panels from horizontal to vertical position or for turning over of panels to enable the fitting of insulation, or the nailing on both faces of a panel. A pair of hydraulically operated tables (also known as a butterfly table) that enable the panels to be brought to the vertical position, passed to the 2nd table, and safely lowered back down on the opposite side for fitting of insulation and closing of the panel. There is an option to have pneumatically operated pop up idle roller tracks fitted in the table, for easy loading and unloading the panels. The hydraulic lifting of the tables is controlled by push button operation 3,5kw motor 6m standard length (optional 12m) 4m maximum panel height Fedpjdzc Rfjfx Afnjfu Optional side and end stops for floor cassette assembly

Year of construction: 2019, condition: like new (used), Dry air system M + H SOMOS (art.2200) M + H Somos dry air dryer RDT 250, NEW CONDITION Bj. 2019 Price: € 12.500 Contact : Mr. Rainer Eckerle Fsdpfx Afegl A Snonjfu

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Ffodencd Ecspfx Afnsu Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: excellent (used), SILOMAT for silos FREE FALL type or PRESSURE TYPE. For plastering machine or other use. /dozens of pieces/ Ffsdelf Niqopfx Afnou We have also for sale about 200 transportable silos (free fall or pressure type). Sales in Poland (BIESLKO BIALA lub OLSZTYN) or Italy (RIMINI). KNAUF, BAUMIT, PFT, M-TEC, MALTECH, MIXER, PUTZMEISTER, mortar, plaster, cement, silos, silo, silomat, silomats

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, Fork positioner Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Technical condition: New Ffjdpfxjw Sp Dhs Afneu Description: Brand-new fork positioner, frame width 1,200 mm, opening center/center 270 to 1,120 mm, brackets for standard forks, with sideshift valve.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Load center: 500 Ffjdpfx Afsw Sp Dbjnju ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.