Used Long 2610 for sale (6,534)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. Iedpez S Ufbsfx Ap Dotn The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2081-9007, total height: 2,200 mm, total length: 1,462 mm, total width: 1,750 mm, workpiece weight (max.): 20 kg, type of input current: DC, overall weight: 3,300 kg, travel distance X-axis: 250 mm, travel distance Y-axis: 795 mm, travel distance Z-axis: 250 mm, input frequency: 50 Hz, input voltage: 230 V, workpiece length (max.): 700 mm, workpiece width (max.): 200 mm, workpiece height (max.): 700 mm, protection type (IP code): IP54, Equipment: documentation/manual, type plate available, Measuring machine with 4 NC-controlled axes, featuring non-contact measurement technology and an additional measuring probe for the automated measurement of micro-precision tools such as milling cutters, drills, step and profile tools. Extended measuring range, specifically for long tools up to 700 mm in length. Due to an additional backlight camera with 400x magnification, even the smallest tools, i.e., microwork tools, can be measured in terms of contour or profile. Thanks to the 400x magnification in both backlight and front light, microwork tools can also be measured using the backlight method. Backlight CCD matrix camera 1, magnification = 50x, diameter (up to 150 mm) and length measurements (up to 700 mm), angle measurements, and radii of the outer contour can be measured. Backlight CCD matrix camera 2, magnification = 400x, observation at the tool circumference, diameter, length, angle measurements, and radii of the outer contour of mini or microwork tools can be measured. Front light CCD matrix camera 3, magnification = 400x, observation of the side view, e.g., helix angle, chamfer width, chip space depth, chip, spiral, and relief angles. Front light CCD matrix camera 4, magnification = 400x, observation of the end face, axial, relief, and radial angles, chamfer widths, center distances. Iodpszvdxajfx Ap Dotn Tool holder SK 50. Software features, see PDF Software License. The machine is sold as a complete workstation with all existing accessories. Also available with a second

Condition: excellent (used), CATALOGUE NUMBER 8128 Technical specifications: - Length of workpiece: 2600 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 170 mm - Fan - 2 speed settings + clockwise/counterclockwise rotation - Diameter of dust extraction port: 120 mm Itedpfo Aac Eqsx Ap Den - Overall dimensions (L/W/H): 3650x1330x1500 mm - Weight: approximately 800 kg ADVANTAGES – Polish production – With fan – DTR documentation included – Unpainted – Used sander, very good condition Net price: 6200 PLN Net price: 1442 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 61,700 h, functionality: fully functional, machine/vehicle number: 7831, spindle motor power: 5,500 W, turning length: 231 mm, spindle speed (max.): 10,000 rpm, turning diameter: 25 mm, spindle bore: 25 mm, overall weight: 3,000 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, feed length Y-axis: 534 mm, feed length Z-axis: 230 mm, total width: 1,400 mm, total length: 2,400 mm, total height: 2,060 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, bar diameter (max.): 25 mm, quill travel distance: 230 mm, quill diameter: 25 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, input voltage: 400 V, power: 5.5 kW (7.48 HP), travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, travel distance Z-axis: 230 mm, operating pressure: 6 bar, Equipment: documentation/manual, rotational speed infinitely variable, Tornos Deco SIGMA 20s Swiss-type automatic lathe, including Robobar SBF-532 3000mm bar feeder, Mayfran Consep chip conveyor with drum filter (unique version), electrostatic oil mist collector, and an automatic CO₂ fire suppression system (Kraft & Bauer). Fitted with a Fanuc 31i-model A CNC control, spindle speeds up to 10,000 RPM on both the main and sub spindles. The machine features 6 axes and 22 tooling positions: Main spindle: 12 positions, 6 of which are driven (up to 6,000 RPM) Sub spindle: 10 positions, 6 of which are driven (up to 6,000 RPM) Iodpfsyrg Ahex Ap Detn Also equipped with high-pressure coolant, up to 80 bar. The machine can be inspected under power. Dismantling and transport are the responsibility of the buyer. Parts included with the machine: • External holder left, long – 6× (417608) • External holder left, short – 1× (417606) • Single driven holder, reduced speed – 2× (417612) • Double clamping, long – 2× (417617) • Double clamping, short – 2× (417620) • Driven block – 2× (417624) Bushings for pusher diameters (216787): • Ø10 • Ø16 • Ø20 • Ø25 Ejector set: • Ø5 to Ø20 (in 1 mm increments)

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Itedpfx Apeugvxxj Don Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Manufacturer: Johannsen Model: Wide belt sanding machine Year of manufacture: 1996 Itjdpozzlvwefx Ap Den If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, Used baguette long moulder model FVF 800 Weight range approx. 50 – 1200 g Output/hour approx. 1,200 pieces - Stainless steel housing - Mobile undercarriage - Various new parts (bearings, drive shaft, main switch, new belts) - Technically inspected, cleaned Fully functional (Photos = sample model) Iedpfx Apjy N S Dyj Dotn All prices are net plus VAT, ex works Syke. Available at short notice (shipping possible at buyer's cost) Advance payment required with order We operate exclusively under our General Terms and Conditions. Subject to prior sale, technical modifications, and errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Fanuc control system, Turning and milling lathe, Pick-up spindle, Itedpfx Aoz Ryynop Dsn Tool magazine.

Condition: excellent (used), functionality: fully functional, engine power: 2.2 kW table length: 290 cm Isdpszdyhmsfx Ap Dstn table width: 80 cm electric table adjustment belt width: 150 mm power supply: 380 V

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm Itjdpfx Apoz Akgwo Djn - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: good (used), Year of construction: 1985, For sale is a used Langzauner LZK 3/2 wide belt grinding machine with a grinding belt length of 6200 mm. The machine is in good condition and has been inspected by our qualified technicians. Technical data: - Table size 2500 x 800 mm - Height adjustable - Grinding belt length 6800 mm - Dust extraction connection Ø 150 mm - Motor power 3 kW / 4.1 hp - Year of manufacture 1985 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, wide belt, wide belt sander Itjdpez Anwmsfx Ap Den Reference: R-N0131

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Itedpez Erdtjfx Ap Den Bar loader: IEMCA BOSS 432/44

Condition: used, JOHANNSEN Type T 95 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Ijdpfxszryw Dj Ap Djtn Technical data: - Grinding length: approx. 2,780 mm - Grinding width: approx. 950 mm - Motor: 6 kW

Condition: good (used), functionality: fully functional, mileage: 146,463 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,325 mm, overall weight: 3,500 kg, empty load weight: 2,587 kg, maximum load weight: 913 kg, first registration: 08/2021, next inspection (TÜV): 08/2027, loading space length: 4,300 mm, loading space width: 1,787 mm, loading space height: 1,930 mm, emission class: euro6d-temp, color: white, tire size: 235/65 R16C, number of seats: 3, number of previous owners: 1, Year of construction: 2021, trailer load braked: 3,500 kg, machine/vehicle number: W1V9076351P343756, Equipment: ABS, AdBlue, USB port, additional headlights, air conditioning, airbag, all-season tires, blind spot assist, car registration, central locking, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, rear view camera, sliding door, soot filter, trailer coupling, truck registration, 9147 Exterior paint color Arctic White MB 9147 AR5 Rear axle ratio I = 4.727 BA3 Active Brake Assist BH6 Control code for hydraulic unit variant 5 BK2 Control code for wheel brake configuration 2 C6L Multifunction steering wheel CB8 Stabilization Level II CL1 Steering wheel adjustable in inclination and height CW2 Deletion of vehicle lowering function D03 High roof D13 Mounting rails for roof rack D50 Continuous partition E07 Hill-start assist E1D Digital radio (DAB) E1E Navigation E1G Live Traffic Information E1U USB socket 5 V E2I Auxiliary battery for retrofitted equipment, interior E2N Control for Pro features in NTG6 E30 Main battery switch, single-pole E36 Additional battery relay E3J Pre-installation for switch panel E3M MBUX multimedia system with 7-inch touchscreen Ijdpfx Apez Tftls Dstn E43 Trailer socket 13-pole E46 Socket in the cab ED4 Fleece battery 12 V 92 Ah EY6 Breakdown management F64 Exterior mirrors, electrically foldable F68 Exterior mirrors, heated and electrically adjustable FF4 Storage compartment above the roof liner FF5 Storage compartment above the windshield FG8 Cup holders, front FJ4 Storage compartment under the dashboard FKA Box van FR8 Rear-view camera FY7 Multi-button remote control FZ9 Two additional main keys GD8 6-speed manual transmission ECO Gear H1B Operation of tachograph, front, under the headliner H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic climate control system Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Model series C907/C910 Sprinter IE0 Model series C907 VS30 Rwd IG4 Standard IG5 Basic IH6 Head unit ECE/ROW IK0 Complete vehicle IL1 Domestic market (Germany) IL5 Left-hand drive IR6 Wheelbase 4325 mm, rear overhang 1615 mm IT4 3.5-tonne vehicle J10 Speedometer km/h J55 Seatbelt warning system for co-driver's seat J58 Seatbelt warning system for driver's seat J65 Outside temperature display JA7 Blind Spot Assist JA8 Crosswind Assist JB4 Active Lane Keeping Assist JD6 Intelligent tachograph EU JF1 Rain sensor JG0 Shift point indicator JH3 Communication module (LTE) for Digital Services JI7 Start-up mileage, service interval 60000 km JW0 Rear warning system KB7 Main tank 93 liters KL1 Fuel level sensor for auxiliary heater KP6 Exhaust gas cleaning SCR Generation 3 L Left-hand drive L65 Interior light in cargo/passenger compartment with door contact switch L94 Deletion of parking lights LA2 Headlamp Assist LB1 Side marker lights LB5 3rd brake light LC2 LED light strip in the cargo area LC4 Comfort roof control unit LE1 Adaptive brake light LX5 Europe M40 Generator 14V/200A MG3 Engine OM651 DE 22 LA 120 kW (163 PS) MJ8 ECO start/stop function MP6 Engine design Euro VI Q11 Longitudinal member reinforcement QA7 Trailer coupling for increased trailer load 3.5 t QA9 Step at rear door for trailer coupling RM0 All-season tires RS3 Steel wheels 6.5 J x 16 RX5 Wheel manufacturer Maxion Wheels RY2 Tire pressure monitoring system on front and rear axles, wireless S22 Armrest for driver's seat, ISO-fix (child seat mounting system) S23 Co-driver's seat, double seat SA5 Airbag, driver SA6 Airbag, co-driver SB1 Driver's seat, comfort SH1 Thorax/pelvis sidebag, driver SH2 Thorax/pelvis sidebag, co-driver SH9 Windowbags for driver and co-driver SK2 Seat occupancy recognition, driver's seat T16 Sliding door, right V43 Wood floor V85 Smoker's package V94 Cable duct on side wall V95 Cable duct on rear portal VF7 Fabric Maturin black W54 Rear door, double-leaf, 270 degrees XM4 Acoustic pac

Condition: good (used), functionality: fully functional, mileage: 120,502 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,424 kg, maximum load weight: 1,076 kg, first registration: 09/2022, next inspection (TÜV): 08/2028, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, emission class: euro6d-temp, color: silver, number of seats: 5, number of previous owners: 1, Year of construction: 2022, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, trailer coupling, truck registration, Number of seats: 5 (Removable 3-seat bench in the cargo area) Multimedia system MBUX (7" touchscreen) Bluetooth hands-free system Steering wheel with multi-function controls Storage compartments: luggage net on the rear doors Airbag on the passenger side Acoustic package Trailer hitch: ball head, for increased towing capacity - 3.5 t 13-pin trailer socket Chassis: station wagon version DAB tuner (digital radio reception) Ceiling light in the cargo area with door contact Grab handle on the rear pillar, rear right Tachograph operation located at the front under the headliner Windows for rear doors Window in the cargo/passenger compartment: - fixed, front left Window in the cargo/passenger compartment: - fixed, front right Vehicle without cargo compartment partition Generator 250 A Iedpjz Uq Eisfx Ap Dotn Rear door (opening angle 270 degrees) Wooden floor in the cargo area Cargo area light, LED Cable duct on the side wall Side marker lights Navigation system for MBUX multimedia system Cross member with integrated step Spare wheel in roadworthy condition Spare wheel holder under the end of the frame including jack Interior rearview mirror Seats in the cab: single passenger seat Seats in the cargo/passenger compartment: 1st row, 3-seat bench 230V socket in the cab Panelling in the cargo/passenger compartment: wood, high (up to the roof) Heat protection glazing (windshield with band filter at the top) Electric auxiliary heater Hot water auxiliary heater.

Condition: excellent (used), Catalog number: 8120 Itjdpez Nhv Ijfx Ap Den TECHNICAL DATA - Length of workpiece: 2600mm - Width of workpiece: 800mm - Main motor: 4kW - Width of sanding belt: 160mm - Fan - 2 types of rotational speeds + clockwise/counterclockwise - Diameter of dust extraction nozzle: 2x120mm - Overall dimensions (L/W/H): 3700x1250x1500mm - Weight: approximately 800kg ADVANTAGES – Polish-made – With fan – DTR documentation – Unpainted – Used sander, very good condition Net price: 5900 PLN Net price: 1372 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: ready for operation (used), Available for immediate pickup from our location: Hydraulic long bending machine Manufacturer: Thalmann Capacity: 6000 mm bending length Material thickness: 2 mm Roller shear Back gauge Drive power: 4 kW Itjdsz Ixm Tjpfx Ap Don Bending angle adjustment Weight: 3 tons Price: EUR 6,000.00 plus VAT, ex works.

Condition: used, JOHANNSEN Type T 85 long-belt sander or belt sander for the precise surface, fine and intermediate sanding of solid wood, veneer and large-format furniture components in joinery workshops and interior fit-out projects. Technical data: - Table size: 2,800 x 950 Ijdpfxezryx Ue Ap Dstn - Motor: 5.5 kW - Belt width: 150 mm

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor Itjdpjxpmtyefx Ap Djn - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland - immediately available -

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Itodpeywzvhjfx Ap Dsn

Condition: used, Year of construction: 2023, The vehicle is in top technical and optical condition. The vehicles for sale are checked and repaired in our master workshop. Non-smoking vehicle Equipment: First owner, ABS, ASR, ESP, airbag driver, 3. Brake light, electrically adjustable exterior mirrors, electric windows, headlight range control, radio central locking and immobilizer, electric interior lock, air conditioning, hands-free system, on-board computer, height-adjustable driver's seat with armrest, cup holder, power steering, steering wheel adjustment, Cruise control, Parktronic rear, Parktronic front, reversing camera, DAB radio, Bluetooth, sliding door right, rear hinged doors sheet metal, winter tires, lashing eyes in load compartment, wooden load floor, lashing eyes for cargo, color windows, 16-inch tires, tire pressure monitoring, trailer coupling, EURO6 Total weight: 3500kg Payload: 1124kg Towing capacity: 3000kg Interior load compartment length: 3.20m Width: 1.75m Height: 1.90m MAN factory warranty until 01/2025 Current vehicle inspection Complete service booklet or digital service certificate Isdpfxjup Ebcs Ap Dstn Repair - service - reconditioning costs included in the purchase price. Bank loan and leasing possible Subject to changes and errors excepted.

Condition: excellent (used), functionality: fully functional, mileage: 105,500 km, first registration: 05/2023, fuel type: diesel, maximum load weight: 1,365 kg, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, fuel: diesel, energy efficiency: D, color: white, gearing type: mechanical, emission class: euro6d-temp, number of seats: 3, total length: 5,998 mm, loading space length: 3,700 mm, loading space width: 1,700 mm, Year of construction: 2023, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, cruise control, electronic stability program (ESP), navigation system, non-smoking vehicle, tire pressure monitoring, truck registration, FIAT DUCATO, LONG WHEELBASE, HIGH ROOF, 2023 MODEL, SINGLE OWNER, EURO 6D EMISSIONS STANDARD, 105,000 KM, FULLY EQUIPPED, USEFUL LOAD CAPACITY 1,365 KG. Iedez S Uctepfx Ap Dstn

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 07110-10-6542, functionality: fully functional, operating hours: 200 h, power: 3.25 kW (4.42 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 6,800 mm, grinding height: 240 mm, height adjustment type: electric, grinding belt speed: 1,900 mm/s, actuation type: electric, total length: 3,700 mm, total width: 1,450 mm, overall weight: 300 kg, Equipment: CE marking, documentation/manual, WIDE BELT GRINDING MACHINE, Type LZG-KE Machine type: LZG-KE Year of manufacture: 2010 Machine number: 07110-10-6542 Motor power, grinding belt: 3.0 kW - Total connected load max.: 3.0 kW - Operating voltage: 400 V, three-phase - Operating current: 7.4 A - Type of protection for electrical system: IP 54 - Installation-side connection cross-section: 5 x 2.5 mm² - Installation-side short-circuit protection: 16 A Grinding belt dimensions: 6800 x 150 mm Grinding shoe dimensions: 320 x 145 mm 420 x 145 mm Stand overhang: 680 mm Stand overhang height: 340 mm Size of support table: 2500 x 800 mm Permissible weight load on support table: 100 kg Minimum workpiece length when grinding with a grinding shoe: 350 mm Itedpfx Aszqa Iysp Don Grinding speed: approx. 19 m/s Table height adjustment range: 240 mm Dimensions: see drawing no. 13 Weight: 300 kp New, wide belt grinding machine for sale, only used occasionally. Ready for immediate collection or testing.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 6,465 mm, total width: 600 mm, total height: 285 mm, load capacity per storage section: 1,200 kg, number of shelf rows: 96, We offer this fully functional KASTO UNIPORTAL 1.2 automated long material storage system, manufactured in 2001. It is in perfect working order. The long materials are stored in up to 96 cassettes, with a payload of 1.2 tons per cassette. Usable cassette dimensions: 600 x 285 x 6465 mm. Iedsz Hm Ebepfx Ap Dstn The system can be inspected on-site. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Langzauner LZG 1000/700/1400 long belt sander large projection 1000 mm table dimensions 2500 mm belt dimensions 6800 x 150 mm right left run 2 belt speeds 11 and 22 m/sec vacuum clamping device lighting year of manufacture 1977 tested for functionality dimensions 3700 x 1200 x 1500 mm weight 950 kg price 2500.- Iodpfx Ajr Axf Tsp Djtn