working area 76 mm
Number of stations 1 0
material length beliebig mm
tube diameter mm
grinding band dimension 100 x 2000 mm
Band Speed 30 m/sec
motor speed 2800 U/min
0 3 kW
range L-W-H 1,3 x 0,5 x 0,8 m
weight 200 kg
TECHNICAL DETAILS, work grinding wheel diameter : 600 [mm], grinding wheel width: 500 [mm], EQUIPMENT, in feed working device, loading gantry with storage magazine, lubricating tank with paper filtration, cooling unit, speed variator on the driven grinding wheel, various grinding wheel holders shaft, various grinding wheel holders flanges, various grinding wheels, new rebuilt machine with numerical axis on grinding wheel holder slide
working area 10,,,,,154 mm
Number of stations 6
material length 6000 mm
BELTGRINDING LINE for WETGRINDING and HIGH POLISHING of TUBES
Type: CPS 400-3000-6U
Stations: 6 pieces.
Working range: 10 - 150 (154) mm Ø
Wet grinding : by grinding belts
High polishing: by polishing heads
Piece weights: max. 75 kg
Working direction: from left to right
Advance speed: v = approx. 7,8 m/min.
Motordata: 6 x 7,5 kW, 2850 rpm, 380 V, 50 Hz... more
Band grinding machine of the company Rema.
Swivel area belt sander with integrated extraction optically and technically in very good condition demonstration machine.
Motor and bearings have been checked and are in perfect condition.
We have measured the motor, all phases are fine and evenly pull power.
Model: BS 75
Power: 0.55 / 0, 7kW
Speed: 1450/2900 U/min
Cutting speed: 10/20 m / sec
Roles-ÿ: 132 mm
Belt: 950 x 100 mm
Suction stand: DP 12-A wate... more
TECHNICAL DETAILS, mini diameter which can be grinded : 0.1 [mm], maxi diameter which can be grinded : 60 [mm], maxi length which can be grinded according to plunge process: 100 [mm], working grinding wheel external diameter : 305 [mm], working grinding wheel maxi width : 102 [mm], working grinding wheel boring : 127 [mm], number of working grinding wheel speeds : 2, working grinding wheel mini/maxi speed : 2220/2840 [rpm], control grinding wheel external diameter : 254 [mm], control grinding w... more
Centerless grinding machine
Fabr. Nomoco, type M 100
Year of construction 1980
Grinding diameter 1-99 mm
Grinding wheel diameter 400 mm?
Rule disc 180 mm
Power 12 KW
Weight approx. 4,1 t
The machine was built before about 2 years from the production and since then kept in the camp.
The machine was however up to the reduction in operating and worked flawlessly. Now she has some rust is applied but still in a visually good condition.
Dual grinder Fabr. GRAB type DV 40-2-2
Contact disc diameter 450 mm
How to contact with wheel width 100 mm
Sanding belt size 3500 x 100 mm
Engine speed 1500 rpm.
Weight approx. 275 kg
Stand height 920 mm
-2 band loop arms type BA 25 with closed protective hoods
-Suction unit KF 125
used, in good condition
Workpiece diameter 1-300 mm, dia. wheel max 725 mm, width 300-380 mm, SS
Weight basic machine approx. 13.5 to power max. 100 kW.
Centerless grinding machine for the continuous and plunge grinding, fixed grinding Center, grinding wheel dia. 725 mm for maximum tool life and productivity, especially with conventional
Grinding wheels, hydrostatic guides for highest accuracy for grinding and control sled,
Direct drive servo motors for grinding and rule slide, dresser with a separate ... more
Price on request by Richard Lerchenmueller
Max grinding diameter: 5-175 mm
Control wheel width: 610 mm
Max grinding width: 610 mm
Work area: mm
Maximum gap between the new disc: 250 recommended working range: 5-175 mm
Maximum workpiece length for plunge grinding - normal discs: 605 mm
Maximum workpiece length for plunge grinding - profile disc: 695 mm
TECHNICAL DETAILS, Work grinding wheels dimensions : 508 x 254 x 250 [mm], Training grinding wheels dimensions : 305 x 127 x 250 [mm], Floor space : 2050 x 1100 x 1700 [mm], Weight : 3450 [kg], EQUIPMENT, In-feed ruler holders, Plunge ruler holders, Automatic plunge device, 1 work grinding wheel holder, 1 training grinding wheel holder
TECHNICAL DETAILS, mini - maxi diameter: 0.50 - 50 [mm], maxi bar diameter: 12 [mm], working grinding wheels dimension: 305 x 102 x 127 [mm], driving grinding wheels dimension: 204 x 102 x 180 [mm], working grinding wheel power: 10 [KW], dimensions: 1 400 x 9 800 x 1 500 [mm], weight: 1 450 [kg], EQUIPMENT, diving device, in feed work, lubricating tank with paper filter
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
INCLINE CLEATED BELT CONVEYOR -- Incline Cleated Belt Conveyor -- 48" Wide belt conveyor -- 2" high cleats -- 16'6" long -- 2 HP motor -- Reconditioned with 90 days warranty -- Allow 8 to 10 weeks for delivery more
"B" AXIS 1 DEGREE range -15/+225, 1000MM CENTRE DISTANCE x 175MM HEIGHT, 2 EXTERNAL WHEELS 500/400MM, INTERNAL GRINDING, ACTIVE LENGTH POSITIONING, SWIVEL OF TABLE 8.5 DEGREES, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16T. MACHINE AVAILABLE TO END USER CUSTOMER ONLY WITH OPTION OF INSTALLATION, OPERATOR TRAINING, SERVICE ETC
GRINDING MACHINES FOR RENT.....
WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER AND OFFER INSTALLATION... more
Used roll grinding machine Fabr. WALDRICH Siegen, type WSIIb-10 com 12316. Rev. 20.3.1968, part of overhaul and the new Cabinet in 2012.
(also called reconditioned or CNC converted with 2 years warranty)
Maximum grinding diameter / reel diameter approx. 1400 mm maximum measured tip height on the tailstock 700 mm maximum possible grinding length 5000 mm maximum distance tailstock to faceplate 5000 mm 2 grinding spindle speeds 420 / 1260 roller speed of stepless 1... more
band width: 30 mm
height over floor: 1100 mm
extraction suction socket - diameter: 80 mm
total power requirement: 3 kW
weight of the machine approx.: ca. 250 kg
space requirements of the machine approx.: 1,65x0,75x1,3 m
POLITING & BELT GRINDING MACHINE
Machine is equipped with a polishing wheel (D=340x30mm)
Motor Revolution: 140 rpm
Machine is in functioning condition more
"AS NEW" ONLY 3600 HOURS - HIGH PRECISION UNIVERSAL GRINDER
S20-2 TOOLROOM EXTERNAL CYLINDRICAL GRINDER WITH INTERNAL READY (ANOTHER S20-2 400MM CENTRES WITH EXTERNAL+INTERNAL +ACCESSORIES ALSO AVAILABLE BY SEPERATE NEGOTIATION)
650MM CENTRE DISTANCE x 100MM HEIGHT, SWIVELLING TABLE AND WORKHEAD, COOLANT TANK, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, SONY DIGITAL READOUT IN X AND Z AXIS.
PLEASE NOTE *****MACHINE AVAILABLE TO END USER CUSTOM... more
grinding diameter max. 100 mm
regulating wheel width (350x) 250 mm
max. width of grinding wheel (650x) 250 mm
Control Siemens 840D
max. workpiece diameter 100 mm
min. workpiece diameter 1,5 mm
workpiece length - max. 245 mm
grinding motor 22 kW
drive control wheel 5,7 kW
regulating wheel turning speeds 5 - 600 (900) U/min
grinding wheel adjustment 0,0001 mm
total power requirement 56 kW
weight of the machine ca. 13 t
dimensions of the machine ca. 5,7 x 3,3 x 2,3 m
Centerless grinding ... more
band width: 80 mm
band length: 3500 mm
revolutions per minute of the motor:: 1450
extraction suction socket - diameter: 80 mm
total power requirement: 3,0 kW
weight of the machine approx.: 300 kg
space requirements of the machine approx.: L:2,0xB:0,75xH:0,95 m
Belt grinding machine
Belt regulation done through manual clamping device
Motor revolution: 1450 rpm
Grinding belt 3500x80mm with P 180 wound up on a roll and motor.
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph.
HEESEMANN LSM-8/3 Wide Belt Finishing Sander, 52" and (3) Heads;53" HEESEMANN LSM-8, ...3-Head Wide Belt Sander for Calibrating, Fine Finishing, or Sealer Sanding of Panels & Doors. -- Equipped with (1) Cross Belt, (1) Sectional platen and (1) large dia. Panel Cleaning or Denibbing [...] Configuration: -- 1st Head: CSD Segmented cross-belt, electronic controlled segments conform to panel size, 20/27 HP motor dual speed abrasive belt speeds... more
STUDER S35 retrofitted with NEW SIEMENS CNC in 2017 eliminating the original Grossenbacher cnc
CAN PROFILE WHEELSHAPES-MARPOSS AIR GAP CONTROL, AUTOMATIC WHEELHEAD SWIVEL FOR ANGLE GRINDING-LENGTH POSITIONING AT AN ANGLE (WITHOUT NEED TO STRAIGHTEN UP), EASY GLIDE DOOR, RIGHT SIDE START CYCLE-DRESS-ABORT CYCLE BUTTONS,....machines originally built from 1989 to 1993
*****MACHINE AVAILABLE TO END USER CUSTOMER ONLY*****
REBUILT BY STUDER TRAINED S35 SPECIALIST SERVICE ENGIN... more
Schleif-Ý - max. 300 mm
grinding length 400 mm
workpiece length mm
table surface area 900x400 mm
table speeds 5-5000 mm/min
swivellable 90 °
stroke 400 mm
grinding spindle speed 4n: 2100-600 U/min
Schleifscheiben-Ý 150 mm
grinding wheel motor 0,65/1 kW
turning speed range U/min
electrics - voltage/frequency 30/50 V/Hz
total power requirement kW
weight of the machine ca. ... more
grinding length: 450 mm
grinding diameter: 200 mm
workpiece height: 220 mm
spindle speed max.: 6300 U/min
grinding wheel diameter: 200 mm
grinding head vertical adjustable: 220 mm
grinding spindle - swivable: 306 °
table surface area: 240x1000 mm
table adjustment: schräg 7° re/li °
table travel longitudinal: 450 mm
table travel cross: 260 mm
total power requirement: 1,14 kW
weight of the machine ca.: ca. 1,5 t
space requirements of the machine approx.: T:1,5xB:1,6xH:1,5 m
transport measurements ... more
grinding range 3-50 mm
sharp cornered angle min./max. 90-140°
weight ca. 120 kg
dimensions of the machine ca. 810 x 570 x 1260 mm
Condition: ready for operation
Electric 380 Volt
Fine angle adjustable / grinding - kind tridimensional.
Machine dealer with own stock of 2500 m² and certification of the database
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY-----
*****ONLY 14,700 HOURS UNIVERSAL STUDER S36 FAVORIT*****
500mm GRINDING WHEEL, 1000mm BETWEEN CENTRES x 175mm CENTRE HEIGHT, MOVABLE TAILSTOCK (not like many that are FIXED restricting machine setups!!!) WITH TAPER FINE ADJUSTMENT, WHEELHEAD ZERO DEGREES +/- 8.5 DEGREES, SENSITRON, GRANITAN BASE, LOW WORKING HOURS, IDEAL PRODUCTION GRINDER FOR GRINDING CARBIDE - TOOL STEEL - STAINLESS - HARDENED STE... more
SCM Sandya 1/S CS 95 Wide Belt Sander
- Very lightly used,
- Fast easy belt changes.
- Grooved steel calibrating roller,
- electronic start positioning,
- automatic feed belt tracking.
- Working width 950mm
- Working height 4mm to 170mm
- 970mm sanding belt width
- 3 phase 15hp main motor. more
grinding diameter: mm
grinding length: 320 mm
centre height: 60 mm
total power requirement: 24 kW
weight of the machine ca.: 4,4 t
space requirements of the machine approx.: L:2,7 x B:2,6 x H:1,6 m
grinding wheels are placed opposite to each other and are running in opposite directions to each other.
Machine is adjusted to circular grinding of small round pieces such as borer.
1. diameter of grinding wheel: 452 x 200mm
2. diameter of grinding wheel: 300 x 200mm
regulating wheel ... more
**SPECIAL OFFER: FREE OPERATOR TRAINING COURSE IF MACHINE SOLD IN FEBRUARY**
***MACHINE AVAILABLE TO END USER CUSTOMER ONLY***
S20 CNC FAVORIT, 400mm CENTRES X 100mm, MARPOSS LENGTH POSTIONING UNIT, TABLE SWIVEL 15 DEGREES, SWIVELLING WORKHEAD, TAILSTOCK WITH FINE TAPER ADJUSTMENT, SENSITRON AIR GAP ELIMINATOR, FANUC 16 T WITH PICTOGRAM PROGRAMMING, VERY WELL MAINTAINED.....
WE BUY/SELL ONLY SELECTED STUDER MACHINES DIRECT TO/FROM CUSTOMER. WE ARE SPECIALIST ONLY IN STUDER MA... more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.