Optimization cross cut line

ATB ARGUS SPECTRA

Condition: new, Year of construction: 2025, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, pressure: 3,450 bar, For sale: MAXIEM 2040 (2025) – New machine, 0 hours, ready for production Opportunity to acquire a brand new MAXIEM 2040, year 2025, in pristine condition. The machine has never been run, with 0 hours on the pump, fully inspected and ready for immediate production start. Equipment: A-Jet (5-axis cutting head) – beveling, angle cutting, and automatic taper compensation Gujdswn El Uspfx Aihjh Rapid Water Level Control – adjustable water level (raise/lower) Premium software – lifetime free updates and unlimited licenses Pump: 40 HP Pump hours: 0 The machine features a cutting area of approximately 4 × 2 meters, offering high precision, great flexibility, and maximum operational reliability. An excellent choice if you want a modern waterjet cutting machine with full capacity – without waiting for a new order. Delivery and installation can be discussed if required.

Condition: ready for operation (used), Slideway grinding machine SFBZ 1800x4000 Length of grinding max, mm 4000 Guodpfx Aiouug A Eehjh Width of grinding max, mm 1800 Dstance between column mm 2200 Height of grinding max, mm 1250 Table size, mm 4000 x 1800 Grinder wheel size max, mm 630 x 100 x 305 Weight of workpiece max, kg 15000 Weight of machine, kg 56.000

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW 400 V Gusdpsfhb Tijfx Aihoh

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019 Gujdpjv U R Agsfx Aihsh

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Guodstk It Sopfx Aihjh Subject to incorrect technical data presented

Condition: used, Year of construction: 2004, functionality: unexamined, EPAL Production line is for sale in Latvia Consists of: Wood lengthening machine - KALLFASS PFA-250 Pallet leg lengthening machine - Bohm & Kruse Pallet top nailing machine - ENGELER Pallet turning machine Guedswgacropfx Aihjh Chain conveyor Pallet nailing machine - Bohm & Kruse Marking/corner cutting machine - Bohm & Kruse, Type 3/24/1500 Milling machine Roller conveyor Stacker - ENGELER ELEWFTORSTAPLER

Condition: good (used), Year of construction: 2004, I sell the semi-automatic finger joint line GreCon Profijoint PJ7/6100-LI. Year 2004. Input length 100-1.000mm Input width 40-150mm / 510mm in 1 step Input thickness 20-50mm Automatic finger joint unit with glue spraying 1 side Automatic turning of the material for the 2nd pass on turning table Guodpfx Asmig Tdjihjh Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 10.50 x 3.50 m Strong construction. Very good condition. Available immediately.

Condition: used, Year of construction: 2014, Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 Gujdsx Hwhxjpfx Aihjh - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. Gusdpfxohknbrj Aihsh PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Gusdpfxjg D Ugko Aihoh Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the