Used Center lathes 0-299mm turning diameter over bed for sale (104)

Condition: excellent (used), Smart & Brown 1024 Mk.2 VSL Vari Speed Drive Centre Lathe 5.5” Centre Height 24” Between Centres 9 1/2” Swing Spindle Speeds 30 - 2500rpm D1-4 Spindle Nose Supplied with tooling as photographed. 415V Electrics Cgeb Etswfq Ehe Atyjt FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78920 Machine Serial Number: N./A Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, machine/vehicle number: 1717, second-hand WEILER PRAKTIKANT sliding headstock and sliding headstock lathe center height 140mm center distance: 500mm spindle diameter: 36mm spindle speeds from 42-2,000 rpm with RSF 3-axis digital readout chuck protection electrically fused with Multifix steel holder head size A with 3 inserts Lever collet device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement. Cgob Etouqb Ems Atyot

Condition: good (used), Functionality: unexamined, turning diameter: 260 mm, turning diameter over bed slide: 200 mm, turning length: 1,200 mm, total length: 2,200 mm, total width: 800 mm, total height: 1,400 mm, overall weight: 1,000 kg, bar passage: 55 mm, EQUIPMENT: - Tailstock Cobowdpnfo Et Atyjgt - Three-jaw chuck (Ø 200 mm)

Condition: good (used), Year of construction: 2017, Functionality: fully functional, Turning diameter above bed ----- 210 mm Turning diameter above cross support ----- 110 mm Center height ----- 105 mm Center distance ----- 400 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Chisel support travel ----- 55 mm Main spindle throughput ----- 21 mm Main spindle mounting ----- MK3 Ceb Et Aewgxq Iotyogt Spindle speed range ----- variable 50 - 2500 rpm Thread cutting inch ----- 8 - 44 TPI Thread cutting metric ----- 0.5 - 3 mm Spindle travel ----- 60 mm Spindle diameter ----- 30 mm Spindle mounting ----- MK2 Motor power ----- 600 Watt Weight ----- 75 kg STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool holder * Drip plate * Rear wall * Claw plate guard * Lead spindle guard * Tool support guard * Set of change gears * Digital speed display * Fixed centers * Left / Right switching * Tools in box * MOUNTED BASE CUPBOARD

Condition: refurbished (used), Functionality: fully functional, spindle bore: 40 mm, turning diameter: 315 mm, center height: 135 mm, turning length: 630 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,250 kg, Schaublin 135 Cob Et Aewgd Sqotyjgt Draai bank One of the latest Schaublin 135 machines, uitgevoerd as a Schaublin 150 Specificatie Manufacturer Schaublin Type 135 Bj. onb. Besturing conv. Draai diameter 315 mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Heidenhain DRO (2-aces) Vaste en Meelopende bril Drieklauw Vierklauw Spantangset B32 Wisselwielen Multifix reedschaphouders Ijlgang op Z-as Enz, enz.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 20 h, Functionality: fully functional, Weiler Praktikant VCD lathe, as good as new, built in 2018, with a 3-axis digital display, three-jaw chuck, collet chuck, Multifix, and chuck guard. Weight approx. 1000 kg. Machine in as good as new condition, exhibition machine. CE compliant. Cgjb Etewg E H As Atyst

Condition: excellent (used), I am selling a Weiler Primus, which is in very good condition. It has been used very rarely over the past few years and exclusively for plastic machining. The machine is equipped with a digital measuring system on 3 axes and is fully functional. No VAT will be added to the sale price. Cgjb Et Aswg Exxjtyjt

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Cjb Et Atecnxrcoyegt Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: good (used), Year of construction: 1987, Functionality: unexamined, machine/vehicle number: 61699, turning diameter over cross slide: 160 mm, spindle bore: 28 mm, turning diameter: 260 mm, center height: 140 mm, turning length: 500 mm, total length: 1,600 mm, total width: 1,000 mm, total height: 1,900 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 71 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Connected load: 3 kW - Nominal current: 25 A Equipment: - Tailstock Cebjv Iq Uie Et Atyegt - Multifix Type A tool holder - Steady rest - Four-jaw chuck (diameter: 120 mm)

Year of construction: 1970, Condition: used, Center lathe Reiden R200 Center height 200mm center width 1000mm 380V Ceb Et Ashtaauotysgt speed 16 - 1580 rpm

Condition: like new (used), Year of construction: 1997, Functionality: fully functional, spindle bore: 40 mm, turning diameter: 340 mm, center height: 150 mm, center width: 630 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Cgeb Etjwgd R Hs Atyjt Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: good (used), Year of construction: 2018, Functionality: fully functional, TECHNICAL DATA Swing diameter -over bed 290 mm -over cross slide 146 mm Center height 145 mm Center distance (between centers) 500 mm Turning length 470 mm Drive power (100/40% duty cycle) 5.5/11 kW Spindle bore 43 mm Speed range 30 – 4000 rpm Quick-change tool holder MULTIFIX size A Tailstock with handwheel Quill diameter 45 mm Adapter taper DIN 228 MK 3 Quill stroke 82 mm EQUIPMENT/ACCESSORIES  Numerical position display with flat screen 2-axis GDW NP 20  Chuck protection sliding cover, electrically locked  Rear chip guard  Quick-change tool post MULTIFIX size A, including 10 holders  Lever-type quick-clamping device for draw-type collet DIN 6341-K 32 (386 E) including collet set  Tailstock with handwheel including live center  Coolant system  Three-jaw chuck RÖHM 160 ZS 160 including clamping jaws  Various accessories  Documentation Cgob Et Atjwfqp Tjyet  Mounting elements

Condition: good (used), Year of construction: 2004, ELBERON Multipurpose Lathe Type: GRC300X750 Chuck 130 mm In good condition. See data sheets for details. Cgsb Etjwah Rqj Atyst

Condition: excellent (used), Functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Ceb Et Ajv Tyzcstyjgt >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm Cebjtw Dxks Et Atyegt Weight 2635 kg

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Csb Et Ajvt Amuotyjgt Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Cjbjcug H Ss Et Atyogt Different "Schaublin 102" models in stock!

Condition: used, Functionality: fully functional, Distance between centers: 450 mm Csb Et Aswcxf Detyogt Center height: 120 mm Spindle bore: 23 mm Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: used, CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools Cgob Et Atoqn E U Tjyst

Condition: good (used), Functionality: fully functional, Type 4 Technical data : Center width approx. 400 mm Center height above bed 120 mm Cobsv Syd Ue Et Atyegt 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 320650, spindle bore: 22 mm, turning diameter: 200 mm, total length: 1,300 mm, total width: 800 mm, total height: 1,640 mm, Very well-maintained Schaublin 102N-VM lathe Center distance: 450 mm Center height: 102 mm Spindle bore: 22 mm Spindle speeds: 45-3100 rpm Precision lathe Automatic longitudinal feed Multifix quick-change tool post with 3 inserts 3-jaw chuck with steel inner and outer jaws Change gears Sony digital display With drawbar and quick-action clamping... see photos. Drawer with some accessories. Csbjv Ulvhs Et Atyjgt

Condition: good (used), Year of construction: 1988, Lathe KMK 40 Speed 1800 rpm Turning length 1000 mm with 3 jaws 4 jaws Multix with 4 inserts Rotating center point Face plate Collet chuck with collet set Cob Et Aou Uh U Ietyogt

Condition: new, Turn & milling combination WMP290V-F with frequency controller TURNING Center distance ----- 700 mm Center height ----- 140 mm Turning diameter over bed ----- 280 mm Turning diameter over slide ----- 165 mm Main spindle passage ----- 38 mm Main shaft take-up ----- MK5 Lathe speed ----- 70-1800 stepless rpm Loose head ----- MK3 Motor power ----- 1.5 kW Weight ----- 230 KG MILLING UNIT Milling head loading ----- 185 mm Milling machine speed ----- 50-2250 stepless rpm Spindle drive of milling machine ----- MK2 Milling head rotatable ----- +/- 90 Cobspz I Iqo Et Atysgt Pinole stroke milling spindle ----- 50 mm Motor power ----- 750W Weight ----- 75 KG

Year of construction: 1986, Condition: used, Weiler Primus lathe built approx. 1986, three-jaw chuck, Multifix. Machine in good condition, ready for demonstration under power on request. Cgob Esrhzcmjt Atyet

Year of construction: 1977, Condition: used, Weiler Matador lathe year ca.1977 , three-jaw chuck , Multifix. Machine in a ready to use condition , By arrangement under power ready for demonstration. Ceb Et Atsnkad Sjyogt