Lead/traction spindle lathe

Weiler Primus Tischdrehmaschine

Condition: like new (used), power: 189 kW (256.97 HP), operation weight: 30,000 kg, chain condition: 90 %, Year of construction: 2021, operating hours: 1,980 h, Equipment: air conditioning, VOLVO EC300ENL Year: 2021 Operation hours: 1.980 hrs. ROPS Cabin protection Airco Radio Back drive camera Monoboom Stick: 3,10 m. All hydr. lines (hammer-, gripper-, scissor line) OQ80 quick coupler 1x bucket with 1.6m width Fodpov Hbhdsfx Ah Uogi u/c: approx. 90% good trackshoes: 600 millimeter width engine with 189kW central lubrication CE Operation weight: 30 to All services are done condition: excellent

Condition: new, diameter 200 mm height 105/265 mm centre height 105 mm Fgedjupxd Repfx Ah Usi weight of the machine ca. 41 kg dimensions of the machine ca. 400 x 330 x 310 m

Condition: used, Year of construction: 1980, loading area mit Untergestell weight 125 kg Fsdpfx Ahow Sykxs Ujgi length 900 mm height 350 mm

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Fsdpfx Asvivmyoh Uegi >> Switchable spindle brake >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: good (used), Tool milling machines DECKEL FP1 - Travel paths X/Y/Z 245-150-340mm Fsdpfxjwpruxe Ah Usgi - Without vertical head / Machine was only used for horizontal milling work - Speed range 95-1900 rpm - Built-in rotary table - Automatic feeds X & Y axis - Various collets - Documentation Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight 650Kg Mistakes / input errors excepted

Condition: used, functionality: fully functional, Lathe Type: Ucimu brf150 380V Distance between centers: 800 mm Spindle bore: 35 mm Tool height: 25 mm Swing diameter over cross slide: 180 mm Swing diameter over bed: 320 mm Fgodpfx Aowurt Seh Uei 4-jaw chuck MC2 in tailstock

Year of construction: 1964, condition: used, pressure 7 t weight 0,9 t Fedoqy Rn Tjpfx Ah Ujgi 1417

Condition: new, Year of construction: 2025, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Fgodpfjv R Tgtjx Ah Uei Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg