Used Weiler Lz for sale (181)

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Dedortd Uwepfx Afnoun Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. Duodpfjvd Dbnsx Afnjn The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Duodpfew I A Uxex Afnen Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg Dodpowwl Izefx Afnsun dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: good (used), WEILER LZ 330 / From Educational Facility - Swing over bed: 330 mm - Swing over cross slide: 165 mm - Turning length: 800 mm - Speed range / gearbox: 25-2800 rpm - Automatic longitudinal / face feeds - Spindle bore: 38 mm - 3-jaw chuck - Collet chuck system incl. 20 collets - Multifix incl. 3 tool holders Dusdpfxjxf Uf Ne Afnsn - Copying device - Various accessories - Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight: 750 kg Errors and omissions excepted

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Dedjyh Dr Nspfx Afneun Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, bore capacity in steel (diameter) 75 mm spindle taper: MT 5 spindle stroke - max. 380 mm transmission ratio 2 11,2 - 2.000 quill stroke 16 mm feed for quill 1: 16 spindle throat 2000/ 38 mm spindle drive 15 kW weight 7,1 t Thread in steel, strength 600 N/mm² max. M75x4 Vertical swivel arm adjustment max. 950 mm Drill slide adjustment on the swivel arm 1614 mm Dedpfx Afoyh Rqfsneun Distance between spindle nose and clamping surface max. / min. 2000/670 Accessories: Heidenhain Radial digital display, clamping cube 1000 x 750 x 500 mm Coolant system, work light

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centre distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Centre height over bed: 140 mm Centre height over cross slide: 80 mm Spindle bore: 36 mm Feed: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Dujdpfx Aeyg Rfijfnjn Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Mains connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX size A quick-change toolpost with 3 interchangeable holders - revolving centre - emergency stop - folding chuck guard - coolant system - very low operating hours Space requirements L x W x H: 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Dusdpfxjyglk Hs Afnon Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Djdpfeyfnwmsx Afneun

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Center height: 214 mm turning diameter over face support : 200 mm Djdeq Hd Ipspfx Afnoun Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Dodpfx Afegabvnensun Spindle head DIN 55027 size 5 All parts are in very good condition.

Condition: excellent (used), Year of construction: 2020, Fixed steady rest for WEILER E 50 lathe in very good condition. Dedpfetx Avkex Afneun Clamping range : 10 -150 mm.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Djdsx I Rtkjpfx Afnjun Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Swing over bed 330 mm Distance between centers 750 mm Spindle speeds 1-4'500 rpm Dsdpfx Asud Naqsfneun Control: WEILER C3 Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1997, Cycle lathe Weiler E 50/1, 1997 Technical data: Immediately available from university: Cycle lathe WEILER Model: E 50/1 Year of manufacture: 1997 Centre height: 280 mm Centre distance: 1000 mm Swing diameter: 500 mm Turning diameter over bed: 570 mm Turning diameter over cross-slide: 340 mm Spindle speeds: 0 – 2500 rpm Chuck Dusdpfx Afeydlhmonsn

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw Dedpfx Afox D Ibbensun • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Dsdpfx Afoydczdsnsun Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout Duodpfjwnh I Sjx Afnon - Type of digital readout: Weiler - Deals (actions): Super deal Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Weiler Primus VC, year of manufacture 2000, digital readout, center distance 500 mm, max. turning diameter over cross slide 150 mm, spindle speed up to 4,000 rpm, spindle bore 40 mm, spindle drive 1.5 kW, Multifix toolholder, 24 longitudinal feeds, metric threads, imperial threads. Djdpfx Asyh Hkhsfneun

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm max. workpiece weight 6.000 kg Spindle diameter in forward position 178 mm Dusdpfsydqqysx Afnon faceplate diameter 1.000 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm control WEILER Lathe - cycle-controlled | WEILER - E110 x 6.000 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110 | E110 x 6000 | E110x6000 | E 110 x 6.000

Condition: ready for operation (used), Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible. Djdpfx Ajydp Ahofnoun

Condition: ready for operation (used), Distance between centers: 500mm, center height: 140mm, turning diameter over bed/cross slide: 295mm/155mm, spindle bore: 36mm, speed: 3550rpm, tailstock taper: MK3. Machine dimensions X/Y/Z: approx. 1500mm/800mm/1250mm, weight: approx. 700kg. On site inspection is possible. Dusdpfxox Hz Rqs Afnsn

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Duedpfx Afsxqqmtjnjn

Condition: ready for operation (used), A conventional precision lathe Weiler is available. Distance between centers: 650mm, center height: 160mm, swing diameter over bed/faceplate: 320mm/190mm, spindle bore: 43mm, speed: 2500rpm, quill diameter: 40mm, quill travel: 85mm. Machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 1050kg. An on-site inspection is possible. Duodpfxox Hz N Hs Afnsn